Aerospace Suitable Components - Rhopoint Components

RARA SMW Series

Lee Waterman — Tue, 12 Nov 2024 11:51:07 +0000

The SMW Series wire wound resistors provide robust, high-power performance for applications that demand reliability under challenging conditions. With power ratings up to 5W and a broad resistance range from 0.1Ω to 500Ω, these resistors are suitable for high-power circuits across a wide range of industries. Offering precision tolerances down to ±1% and a stable temperature coefficient of 200 ppm/°C, they ensure consistent and dependable operation across temperature variations. The flameproof UL94V0 molded package enhances safety by resisting extreme heat and humidity, making SMW wire wound resistors ideal for heavy-duty environments. Additionally, their compatibility with automatic surface mounting supports efficient assembly and cost-effectiveness.

Key Features of SMW Series:

High-power wire wound resistor design: 2W, 3W, and 5W
Wide resistance range: 0.1Ω to 500Ω
Precision tolerances: ±1% & ±5%
Stable temperature coefficient: 200 ppm/°C
Flameproof UL94V0 molded package for safety
Compatible with automatic surface mounting

Application Industries and Use Cases for SMW Series:

Automotive: Engine control units, power steering systems, braking systems
Industrial: Motor drives, power supplies, automation equipment
Consumer Electronics: High-power circuit management in appliances
Telecommunications: Base stations, networking equipment
Medical Devices: Diagnostic equipment, patient monitoring systems

RARA Electronics Corporation is a renowned manufacturer specialising in industrial and braking resistors. They provide high-quality, durable resistors for various industrial applications, including power generation, transport, and renewable energy sectors, ensuring reliability and efficiency in demanding operational environments. Their products are known for performance and customisation options. Please visit www.raraohm.com for more information.

The post RARA SMW Series appeared first on Rhopoint Components.

ISOCOM CSM1224

Lee Waterman — Wed, 16 Oct 2024 13:16:11 +0000

This device is a single channel, hermetically sealed optically coupled isolator. It is composed of a Gallium Arsenide infrared emitting diode and a silicon phototransistor.

The CSM1224 series is being used in environments encountered by space applications. Package styles for this device include an LCC-6 package, with solder dip option available.

Absolute maximum ratings, recommended operating conditions, electrical specifications and performance characteristics are identical for all units.

Key features of the CSM1224 include:

Hermetically Sealed
Radiation Tolerant tested to 150 Krad(si)
High Isolation up to 1,000VDC
LCC-6 Package
Low Input Requirements
High Current Transfer Ratio

Typical applications for the CSM1224 include:

Space Equipment and Systems
Military and High Reliability Systems
Medical Instruments
MOS/CMOS Applications
Logic Interfacing
Data Transmission
Power Supply
Modems

ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

The post ISOCOM CSM1224 appeared first on Rhopoint Components.

ISOCOM CSM1200

Lee Waterman — Wed, 16 Oct 2024 13:16:09 +0000

This device is a single channel, hermetically sealed optically coupled isolator. It is composed of a Gallium Arsenide infrared emitting diode and a silicon phototransistor.

The CSM1200 series is being used in environments encountered by space applications. Package styles for this device include an LCC-6 package, with solder dip option available.

Absolute maximum ratings, recommended operating conditions, electrical specifications and performance characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted.

Key features of the CSM1200 include:

Radiation Tolerance tested to 150 Krad(si)
Hermetically Sealed
High Isolation up to 1,000VDC
LCC-6
Low input requirements
High Current Transfer Ratio

Typical applications for the CSM1200 include:

Space Equipment and Systems
Military and Hi-reliability Systems
Medical Instruments
MOS/CMOS Applications
Logic Interfacing
Data Transmission
Power Supply
Modems

The post ISOCOM CSM1200 appeared first on Rhopoint Components.

ISOCOM CSM166

Lee Waterman — Wed, 16 Oct 2024 13:16:05 +0000

The CSM166 is a hermetically sealed, dual or quad channel optically coupled isolator. Each channel is composed of a Gallium Arsenide infrared emitting diode and silicon phototransistor.

The series is being used in environments encountered by space applications. Package styles for this device include a 16-Pin flatpack package, with solder dip options available.

Key features of the CSM166 include:

Radiation Tolerance tested up to 150 Krad(Si)
High Isolation Voltage up to 1,500 VDC
High Current Transfer Ratio
Hermetically Sealed

Typical applications for the CSM166 include:

Space Radiation Equipment
Military and high reliability systems
Medical instruments
MOS/CMOS Applications
Logic Interfacing
Data Transmission
Power Supply
Modems

The post ISOCOM CSM166 appeared first on Rhopoint Components.

ISOCOM CSM100

Lee Waterman — Wed, 16 Oct 2024 13:16:03 +0000

The CSM100 is a hermetically sealed, single-channel optically coupled isolator. It is composed of an infrared emitting diode and silicon phototransistor.

The CSM100 series is being used in environments encountered in space applications. Package styles for this device include a 4-Pin LCC package with solder dip options available.

Key features of the CSM100 include:

Total Ionising Dose Tested to 150 Krad(Si)
Displacement Damage Tested to 1 MeV x 1013
Withstand Test Voltage of 1,000 VDC
High Current Ratio
Low Input Requirements
4-Pin LCC Package
Hermetically Sealed
Small Outline Package for Surface Mount

Typical applications for the CSM100 include:

Space Equipment and Systems
Military Equipment and Systems
Medical Instruments
MOS / CMOS Applications
Logic Interfacing
Data Transmission
Power Supply
Modems

The post ISOCOM CSM100 appeared first on Rhopoint Components.

ISOCOM CS201

Lee Waterman — Wed, 16 Oct 2024 13:16:02 +0000

The CS200 series are hermetically sealed, single-channel optically coupled isolators. Each channel is composed of a Gallium Arsenide infrared emitting diode and silicon phototransistor.

These optocouplers are being used in environments encountered in space applications. Package styles for this device include a 6-Pin DIP Package, with surface mount and solder dip options available.

Key features of the CS201 include:

Total Ionising Dose Tested to 150 Krad(Si)
Displacement Damage Tested to 1 MeV x 1013
High Isolation up to 1,500 VDC
High Current Transfer Ratio
Low Input Requirements
Hermetically Sealed
6-DIP Package

Typical applications for the CS201 include:

Space Radiation Equipment
Military and High-Reliability Systems
Medical Instruments
MOS / CMOS Applications
Logic Interfacing
Data Transmission
Power Supplies

The post ISOCOM CS201 appeared first on Rhopoint Components.

ISOCOM CH101

Lee Waterman — Wed, 16 Oct 2024 13:16:00 +0000

The CH100 series is a single channel radiation hard optically coupled isolator. It is composed of an infrared emitting diode and a silicon phototransistor.

The CH100 has been designed and manufactured to meet the requirements of very low temperatures experienced in harsh environments encountered by space applications. These devices can be wire bonded within a hybrid application or mounted directly onto a PCB board offering the customer flexibility in their design. Package styles for this device include a 4-pin surface mount package, with solder dip option available.

Key features of the CH101 include:

Total Ionizing Dose tested to 150 Krad(Si)
Displacement Damage to 1 MEV x 10¹²
Low Temperature Operation up to -150°C
4-pin Surface Mount Package
Flexibility in Design for mounting styles
High Current Transfer Ratio
High Isolation Voltage up to 1,000Vdc

Typical applications for the CH101 include:

Space Equipment and Systems
Military and High Reliability Systems
Medical Instruments
Suitable for Hybrid Packaging
MOS/CMOS Applications
Data Transmission
Power Supply
Logic Interfacing

The post ISOCOM CH101 appeared first on Rhopoint Components.

ISOCOM CS600

Lee Waterman — Wed, 16 Oct 2024 13:15:58 +0000

These devices are single, hermetically sealed optically coupled isolators. Each channel is composed of a Gallium Arsenide infrared emitting diode coupled to an integrated high speed photon detector. The output of the detector is an open collector Schottky clamped transistor. These optocouplers have internal shield providing a guaranteed common mode transient immunity specification of 1,000 V/μs. These optocouplers are for Isolation Voltage applications requiring up to 2,500 VDC.

The CS600 series is being used in environments encountered by space applications. Package styles for this device include 8-pin DIP package, with surface mount and solder dip options available.

Key features of the CS600 include:

Total Ionizing Dose tested to 1 Mrad(si)
Displacement Damage tested to 1 MEV x 10¹³
Hermetically Sealed
High Withstand Test Voltage up to 1,500VDC
8-pin DIP Package
High Common Mode Rejection
High Speed – typically 10 Mbits/s (75ns max)

Typical applications for the CS600 include:

Space Radiation Equipment
Military, high reliability system
Medical instruments
MOS, CMOS Applications
Logic Interfacing
Data Transmission
Power Supply
Modems

The post ISOCOM CS600 appeared first on Rhopoint Components.

ISOCOM CSM160

Lee Waterman — Wed, 16 Oct 2024 13:15:56 +0000

These devices are hermetically sealed, dual-channel and quad-channel optically coupled isolators. Each channel is composed of a Gallium Arsenide infrared emitting diode and a high gain photon detector. The high gain output stage features an open collector output providing bother low output saturation and a higher speed of operation than what is possible with conventional photodarlington couplers.

The CSM160 series are being used in environments encountered in space applications. Package styles for this device include a 16-Pin flatpack package with solder dip options available. These packages have a shield effect to cut off ambient light, as they are designed for high density mounting applications.

Key features of the CSM160 include:

Total Ionising Dose Tested to 30 Krad(Si)
Displacement Damage Tested to 3 MeV x 1012
High Current Transfer Ratio (Typically 1000%)
Low Input Requirements 0.5mA
Hermetically Sealed
16-Pin Flatpack

Typical applications for the CSM160 include:

Space Radiation Equipment
Military and High-Reliability Systems
Medical Instruments
MOS / CMOS Applications
Logic Interfacing
Data Transmission
Power Supply

The post ISOCOM CSM160 appeared first on Rhopoint Components.

ISOCOM IS49

Lee Waterman — Wed, 16 Oct 2024 13:15:53 +0000

The IS49 is a hermetically sealed, single channel optically coupled isolator. It is comprised of an infrared emitting diode and a silicon phototransistor.

The IS49 is being used in environments encountered in space applications. Package styles for this device include a 6-Pin LCC package with solder dip options available. Absolute maximum ratings, recommended operating conditions, electrical specifications and performance characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted.

The IS49 is equivalent to 66138, 4N22U, 4N23U, 4N24U, 4N47U, 4N48U, 4N49U.

Key features of the IS49 include:

• Radiation Tolerance Tested to 150 Krad(Si)
• Displacement Damage Tested to 1 MeV x 1013
• Withstand Test Voltage of 1,000 VDC
• High Current Transfer Ratio
• Low Input Requirements
• LCC-6 Package
• Small Outline Package for Surface Mount
• Hermetically Sealed

Typical applications for the IS49 include:

• Space Equipment and Systems
• Military Equipment and Systems
• Medical Instruments
• MOS / CMOS Applications
• Logic Interfacing
• Data Transmission
• Power Supply
• Modems

The post ISOCOM IS49 appeared first on Rhopoint Components.