Digital Input / Output Data Modules - Rhopoint Components

DGH D8710 Digital Input USB Module

Admin — Mon, 23 Nov 2020 20:48:29 +0000

The D8710 15-channel digital input module is part of the DGH’s D8000 data acquisition module family with the USB interface. This input module is able to monitor logic levels, contact closures, switch closures or dry contacts, utilising an internal 10K pull-up resistor on each input terminal. The input terminals can accept signals between ±30Vdc without damage. The D8710 input module can be directly connected to relays and annunciators. For extra security, it utilises a non-volatile EEPROM (Electrically Erasable Programmable Read Only Memory) to store all user-selectable settings such as the range, meaning the values are maintained in the event of power loss. The D8710 module connects to the host computer via USB interface and is compatible with any commercial software supporting Modbus RTU protocol and is DIN-rail mountable (MK-1 mounting kit required). Combined with other D8000 modules, it provides the complete, customised data acquisition system for given application.

15-channel digital input module
Measures logic levels, contact closures, switch closures and dry contacts
Modbus RTU protocol
User-selectable features include device address, baud rate, parity type and others
Logic “0” = <1Vdc, Logic "1" = >3.5Vdc
Internal 10K pull-up resistors on each bit.
Connects to the computer via USB interface
Compatible with all commercial software programs supporting Modbus RTU protocol, including programs from Wonderware, DreamReport, National Instruments Labview, Indusoft and others
Input burnout to +/-30Vdc without damage
Isolation 500Vac, input common to system ground
Power requirements: Serial = 0.75W
Temperature range -25°C to +70°C
Mix and match with other D8000 modules to build a complete, customised data acquisition system

The applications for the D8000 data acquisition modules include:

Process monitoring and control
Remote data logging to any host computer
Product testing

The post DGH D8710 Digital Input USB Module appeared first on Rhopoint Components.

DGH D8720 Digital Output USB Module

Admin — Mon, 23 Nov 2020 20:48:29 +0000

The D8720 15-channel digital output module is part of the DGH’s D8000 data acquisition module family. This output module contains 15 individial open-collector transistor outputs to 30Vdc, 100mA maximum, and is able to control devices requiring an ON/OFF signal such as lamps, annunciators etc. The D8720 input module can be directly connected to relays and annunciators. A range of additional programmable features is available, such as baud rate, parity type, power-on bit state or a communications watchdog times which can be used to move the analog output signal to a known “safe” condition in an event of communication failure. For extra security, it utilises a non-volatile EEPROM (Electrically Erasable Programmable Read Only Memory) to store all user-selectable settings such as the range, meaning the values are maintained in the event of power loss. The D8720 module is compatible with any commercial software supporting Modbus RTU protocol and is DIN-rail mountable (MK-1 mounting kit required). Combined with other D8000 modules, it provides the complete, customised data acquisition system for given application.

15-channel digital output module with open-collector outputs to 30Vdc, 100mA maximum
Vsat: +0.3Vdc max. at 100mA
Short circuit protection to 500mA
Modbus RTU protocol
User-selectable features include baud rate, parity typem, communication watchdog timer and others
Digital Output update rate, 4.5Hz
RS-485 serial communications interface
Compatible with all commercial software programs supporting Modbus RTU protocol, including programs from Wonderware, DreamReport, National Instruments Labview, Indusoft and others
Isolation 500Vac, input common to system ground
Power requirements: Serial = 1.0W
Temperature range -25°C to +70°C
Mix and match with other D8000 modules to build a complete, customised data acquisition system

The applications for the D8000 data acquisition modules include:

Process monitoring and control
Remote data logging to any host computer
Product testing
Direct connection to PLC

The post DGH D8720 Digital Output USB Module appeared first on Rhopoint Components.

DGH D7710 Ethernet MODBUS TCP/IP Digital Input Module

Admin — Mon, 23 Nov 2020 20:48:29 +0000

The D7710 15-channel digital input module is part of the DGH’s D7000 data acquisition module family-supporting RJ-45 Ethernet interface and communication via MODBUS TCP/IP protocol. This input module monitors ON/OFF signal inputs such as logic levels, contact closures and others. Each input contains its own pull-up biasing resistor and operates independently from each other, the data can be retrieved from the host computer using MODBUS RTU protocol. The D7710 output module can be directly connected to a wide range of sensors and annunciators. The D7710 module also features peer-to-peer (P2P) mode, sending the signal directly to a digital output module without the need to involve a host computer. It is also able to upload information to the cloud using ThingSpeak platform, and send e-mail notifications via Gmail free e-mail service (a limit value can be set for each channel separately, triggering the notification e-mail). For extra security, it utilises a non-volatile EEPROM (Electrically Erasable Programmable Read-Only Memory) to store all user-selectable settings such as the range, meaning the values are maintained in the event of power loss. The D7710 module is compatible with any commercial software supporting Modbus TCP/IP ethernet protocol and is DIN-rail mountable (MK-1 mounting kit required). Combined with other D7000 modules, it provides the complete, customised data acquisition system for a given application.

15-channel digital input module
Logic “0” = <1Vdc, Logic “1” = >3.5Vdc
Internal 10k pull-up (biasing) resistor on each input
Modbus TCP/IP communication protocol
RJ-45 Ethernet interface – both 10MB and 100MB
Isolation to 500Vac, input common to system ground
Compatible with all commercial software programs supporting Modbus TCP/IP protocol
Input burnout protection to ±30Vdc
Power requirements: Serial = 2.5W
Temperature range -25°C to +70°C
Mix and match with other D7000 modules to build a complete, customised data acquisition system

The applications for the D7000 data acquisition modules include:

Process monitoring and control
Remote data logging to any host computer
Product testing
Peer-To-Peer Communication

The post DGH D7710 Ethernet MODBUS TCP/IP Digital Input Module appeared first on Rhopoint Components.

DGH D7720 Ethernet MODBUS TCP/IP Digital Output Module

Admin — Mon, 23 Nov 2020 20:48:29 +0000

The D7720 15-channel digital output module is part of the DGH’s D7000 data acquisition module family supporting RJ-45 Ethernet interface and communication via MODBUS TCP/IP protocol. This output module contains 15 open-collector transistor outputs, which may be used to control a range of annunciators, lamps and other devices controllable by ON/OFF signal. Each input is independent and can be controlled from the host computer using MODBUS RTU protocol. The D7720 module contains a range of programmable features such as start up values and communications watchdog timer. It also features peer-to-peer (P2P) mode, accepting signal directly from a digital input module without the need to involve a host computer. It is also able to upload information to cloud using ThingSpeak platform, and send e-mail notifications via Gmail free e-mail service (a limit value can be set for each channel separately, triggering the notification e-mail). For extra security, this module utilises a non-volatile EEPROM (Electrically Erasable Programmable Read Only Memory) to store all user-selectable settings such as the range, meaning the values are maintained in the event of power loss. The D7720 module is compatible with any commercial software supporting Modbus TCP/IP ethernet protocol and is DIN-rail mountable (MK-1 mounting kit required). Combined with other D7000 modules, it provides the complete, customised data acquisition system for given application.

15-channel digital output module
Open-collector transistor outputs to 30Vdc and 100mA maximum
Vsat of 0.3Vdc maximum at 100mA
Modbus TCP/IP communication protocol
RJ-45 Ethernet inteface – both 10MB and 100MB
Programmable features include start up rate and communications watchdog timer
Isolation to 500Vac, input common to system ground
Compatible with all commercial software programs supporting Modbus TCP/IP protocol
Short circuit protection to 500mA
Power requirements: Serial = 2.5W
Temperature range -25°C to +70°C
Mix and match with other D7000 modules to build a complete, customised data acquisition system

The applications for the D7000 data acquisition modules include:

Process monitoring and control
Remote data logging to any host computer
Product testing
Peer-To-Peer Communication

The post DGH D7720 Ethernet MODBUS TCP/IP Digital Output Module appeared first on Rhopoint Components.

DGH D7730 Ethernet MODBUS TCP/IP Digital Output Module

Admin — Mon, 23 Nov 2020 20:48:29 +0000

The D7720 15-channel digital input/output module is part of the DGH’s D7000 data acquisition module family supporting RJ-45 Ethernet interface and communication via MODBUS TCP/IP protocol. This module contains 8 digital inputs which may be used for sensing contact closures and 7 open-collector transistor outputs, which may be used to control a range of devices controllable by ON/OFF signal. Each input/output is independent and can be controlled from the host computer using MODBUS RTU protocol. The D7730 module contains a programmable communications watchdog timer able to move the output signals to a known “safe” location in the event of communication failure. It also features peer-to-peer (P2P) mode, accepting signal directly from a digital input to a digital output module without the need to involve a host computer. It is also able to upload information to cloud using ThingSpeak platform, and send e-mail notifications via Gmail free e-mail service (a limit value can be set for each channel separately, triggering the notification e-mail). For extra security, this module utilises a non-volatile EEPROM (Electrically Erasable Programmable Read Only Memory) to store all user-selectable settings such as the range, meaning the values are maintained in the event of power loss. The D7730 module is compatible with any commercial software supporting Modbus TCP/IP ethernet protocol and is DIN-rail mountable (MK-1 mounting kit required). Combined with other D7000 modules, it provides the complete, customised data acquisition system for given application.

Combination digital module with 8 inputs and 7 outputs
Inputs/Outputs to 30Vdc and 100mA maximum
Outputs Vsat of 0.3Vdc maximum at 100mA
Modbus TCP/IP communication protocol
RJ-45 Ethernet inteface – both 10MB and 100MB
Programmable communications watchdog timer
Isolation to 500Vac, input common to system ground
Compatible with all commercial software programs supporting Modbus TCP/IP protocol
Short circuit protection to 500mA
Power requirements: Serial = 2.5W
Temperature range -25°C to +70°C
Mix and match with other D7000 modules to build a complete, customised data acquisition system

The applications for the D7000 data acquisition modules include:

Process monitoring and control
Remote data logging to any host computer
Product testing
Peer-To-Peer Communication

The post DGH D7730 Ethernet MODBUS TCP/IP Digital Output Module appeared first on Rhopoint Components.

DGH D1700 Digital Input/Output Module

Admin — Mon, 23 Nov 2020 20:47:34 +0000

The D1700 15-channel digital I/O-to-computer module is part of the DGH’s series of modules for monitoring and control of industrial devices through solid state switches. These modules feature 7 input and 8 output bits (models D1701 and D1702) or flexibility by allowing user to define each channel as input or output (models D1711 and D1712). The digital inputs accept a wide signal level input up to +30Vdc and have TTL logic input switches. The open-collector transistor digital outputs will sink 100mA, which is ideal for controlling the solid state relays. The D1700 module uses ASCII communication protocol using RS232 or RS-485 serial communication.

The D1700 comes pre-set with default values of 300 baud, one start bit, eight data bits, one stop bit, no parity and any address recognized, but these values can be easily changed by the user. For extra security, it utilises a non-volatile EEPROM (Electrically Erasable Programmable Read Only Memory) to store all user-selectable settings such as the range, meaning the values are maintained in the event of power loss. The modules are designed to be compatible with all popular computers and no software is necessary to start using them, although the utility software is provided. The D1700M module can be mounted on a DIN-rail if required (MK-1 mounting kit required).

7 input + 8 output bits or variable choice of 15 digital input/output bits
Support of RS-232 or RS-485 ports
Input voltage levels: 0-30V without damage
Input switching levels: High, 3.5V minimum, Low, 1.0V maximum
Outputs: Open collector to 30V, maximum load 100mA (D1711/D1712) or 30mA (D1701/D1702)
Vsat: 1.0V max @ 100mA (D1711/1712) or 0.2V max @ 30mA (D1701/D1702)
User-selectable features include initial values, baud rate, parity type as well as the communications watchdog timer which can move the digital outputs to a safe condition if the RS-232 communication link fails
Events counter can be used to count positive transitions at bandwidths of 20Hz, 50Hz, 200Hz or 20kHz, from logic “0” to logic “1”
Internal switching regulator
Protected against power supply reversals
Compatible with any popular computer without the need for special hardware
Power requirements: Serial = 0.75W
Temperature range -25°C to +70°C

The applications for the D1700 module series include:

Product testing
Energy Management
Batch Processing
Annunciators
Interfaces with modems

The post DGH D1700 Digital Input/Output Module appeared first on Rhopoint Components.

DGH DIN-170 Modbus Digital Input/Output Module

Admin — Mon, 23 Nov 2020 20:47:34 +0000

The DIN-170 MODBUS digital input/output modules are part of the DGH’s DIN-100 data acquisition module family. This input/output module features 6 digital inputs or 6 digital outputs. The open-collector outputs may be used to control solid-state relays which then control other equipment. The digital inputs may be used for sensing the state of limit or safety switches by reading the state of remote digital signals from a host computer. These modules communicate using the MODBUS RTU protocol and feature conversion rate of 8 conversions per second. The signal is transmitted to/received from the computer using RS-485 port; if this is not available a DIN-191 converter to RS-232 can be used. The DIN-170 module can be directly connected to a sensor and perform signal conditioning, linearisation, scaling and conversion to both ASCII and MODBUS values. For extra security, it utilises a non-volatile EEPROM (Electrically Erasable Programmable Read Only Memory) to store all user-selectable settings, meaning the values are maintained in the event of power loss. The DIN-170 comes pre-set with default values of 300 baud, one start bit, eight data bits, one stop bit, no parity and any address recognized, but these values can be easily changed by the user. The modules require no special software and can be connected and started up quickly and easily, however a utility software is available at no extra charge if required. The DIN-170 can be mounted on a DIN-rail directly, without need for a mounting kit.

Selection of six digital inputs or outputs
Open collector outputs to 30V, 100mA maximum load
Supports RS-485 port
Input switching levels: High, 3.5V minimum, Low, 1V maximum
Communicates using MODBUS RTU protocol
User-selectable features include analog input range, baud rate, parity type and others
Vsat: 1.0V maximum at 100mA
Inputs/Outputs are read/set in parallel
Isolated from power supply ground
Input voltage of ±30Vdc without damage
2 programmable single-pole digital filters for smoothing analog data
Power requirements: Serial = 0.75W
Temperature range -25°C to +70°C

The applications for the DIN-170 data acquisition modules include:

Process monitoring and control
Remote data logging to any host computer
Product testing
Interface to PLC

The post DGH DIN-170 Modbus Digital Input/Output Module appeared first on Rhopoint Components.

DGH D6710 Digital Input Module

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The D6710 15-channel digital input module is part of the DGH’s D6000 data acquisition module family. This input module is able to monitor logic levels, contact closures, switch closures or dry contacts, utilising an internal 10K pull-up resistor on each input terminal. The input terminals can accept signals between ±30Vdc without damage. The D6710 input module can be directly connected to relays and annunciators. For extra security, it utilises a non-volatile EEPROM (Electrically Erasable Programmable Read Only Memory) to store all user-selectable settings such as the range, meaning the values are maintained in the event of power loss. The D6710 module is compatible with any commercial software supporting Modbus RTU protocol and is DIN-rail mountable (MK-1 mounting kit required). Combined with other D6000 modules, it provides the complete, customised data acquisition system for given application.

15-channel digital input module
Measures logic levels, contact closures, switch closures and dry contacts
Modbus RTU protocol
User-selectable features include device address, baud rate, parity type and others
Logic “0” = <1Vdc, Logic "1" = >3.5Vdc
Internal 10K pull-up resistors on each bit.
RS-485 serial communications interface
Compatible with all commercial software programs supporting Modbus RTU protocol, including programs from Wonderware, DreamReport, National Instruments Labview, Indusoft and others
Input burnout to +/-30Vdc without damage
Isolation 500Vac, input common to system ground
Power requirements: Serial = 0.75W
Temperature range -25°C to +70°C
Mix and match with other D6000 modules to build a complete, customised data acquisition system

The applications for the D6000 data acquisition modules include:

Process monitoring and control
Remote data logging to any host computer
Product testing
Direct connection to PLC

The post DGH D6710 Digital Input Module appeared first on Rhopoint Components.

DGH D6720 Digital Output Module

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The D6720 15-channel digital output module is part of the DGH’s D6000 data acquisition module family. This output module contains 15 individial open-collector transistor outputs to 30Vdc, 100mA maximum, and is able to control devices requiring an ON/OFF signal such as lamps, annunciators etc. The D6720 input module can be directly connected to relays and annunciators. A range of additional programmable features is available, such as baud rate, parity type, power-on bit state or a communications watchdog times which can be used to move the analog output signal to a known “safe” condition in an event of communication failure. For extra security, it utilises a non-volatile EEPROM (Electrically Erasable Programmable Read Only Memory) to store all user-selectable settings such as the range, meaning the values are maintained in the event of power loss. The D6720 module is compatible with any commercial software supporting Modbus RTU protocol and is DIN-rail mountable (MK-1 mounting kit required). Combined with other D6000 modules, it provides the complete, customised data acquisition system for given application.

15-channel digital output module with open-collector outputs to 30Vdc, 100mA maximum
Vsat: +0.3Vdc max. at 100mA
Short circuit protection to 500mA
Modbus RTU protocol
User-selectable features include baud rate, parity typem, communication watchdog timer and others
Digital Output update rate, 4.5Hz
RS-485 serial communications interface
Compatible with all commercial software programs supporting Modbus RTU protocol, including programs from Wonderware, DreamReport, National Instruments Labview, Indusoft and others
Isolation 500Vac, input common to system ground
Power requirements: Serial = 1.0W
Temperature range -25°C to +70°C
Mix and match with other D6000 modules to build a complete, customised data acquisition system

The applications for the D6000 data acquisition modules include:

Process monitoring and control
Remote data logging to any host computer
Product testing
Direct connection to PLC

The post DGH D6720 Digital Output Module appeared first on Rhopoint Components.

DGH D1700M Digital Input/Output Module

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The D1700M 15-channel digital I/O-to-computer module is part of the DGH’s series of modules for monitoring and control of industrial devices through solid state switches. These modules feature 7 input and 8 output bits (models D1701M and D1702M) or flexibility by allowing user to define each channel as input or output (models D1711M and D1712M). The digital inputs accept a wide signal level input up to +30Vdc and have TTL logic input switches. The open-collector transistor digital outputs will sink 100mA, which is ideal for controlling the solid state relays. The D1700M module uses Modbus RTU or DGH ASCII communication protocol using RS232 or RS-485 serial communication.

The D1700M comes pre-set with default values of 300 baud, one start bit, eight data bits, one stop bit, no parity and any address recognized, but these values can be easily changed by the user. For extra security, it utilises a non-volatile EEPROM (Electrically Erasable Programmable Read Only Memory) to store all user-selectable settings such as the range, meaning the values are maintained in the event of power loss. The modules are designed to be compatible with all popular computers and no software is necessary to start using them, although the utility software is provided. The D1700M module can be mounted on a DIN-rail if required (MK-1 mounting kit required).

7 input + 8 output bits or variable choice of 15 digital input/output bits
Support of RS-232 or RS-485 ports
Input voltage levels: 0-30V without damage
Input switching levels: High, 3.5V minimum, Low, 1.0V maximum
Outputs: Open collector to 30V, maximum load 100mA (D1711M/D1712M) or 30mA (D1701M/D1702M)
Vsat: 1.0V max @ 100mA (D1711M/1712M) or 0.2V max @ 30mA (D1701M/D1702M)
User-selectable features include initial values, baud rate, parity type as well as the communications watchdog timer which can move the digital outputs to a safe condition if the RS-232 communication link fails
Events counter can be used to count positive transitions at bandwidths of 20Hz, 50Hz, 200Hz or 20kHz, from logic “0” to logic “1”
Internal switching regulator
Protected against power supply reversals
Compatible with any popular computer without the need for special hardware
Power requirements: Serial = 0.75W
Temperature range -25°C to +70°C

The applications for the D1700M module series include:

Product testing
Energy Management
Batch Processing
Annunciators
Interfaces with modems

The post DGH D1700M Digital Input/Output Module appeared first on Rhopoint Components.