PCB Signal Terminals - Weidmüller - Rhopoint Components

Weidmüller LSF-SMT 5.00/90 Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LSF-SMT 5.00/90 PCB terminal series from Weidmüller’s Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 5mm pitch. The LSF-SMT 5.00/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Through-hole technology with reflow soldering
Number of poles available from 2 to 8
Solder pin length of 3.5mm
Pitch of 5.00mm
Conductor outlet direction of 90°
Wire connection cross section from AWG 28 to AWG 14
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 5mm to 35mm depending on the number of poles required
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Packaged in tubes
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 5.00/90 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LSF-SMT 5.00/90 Series appeared first on Rhopoint Components.

Weidmüller LM 3.50/90 Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LM 3.50/90 PCB terminal series from Weidmüller’s Omnimate signal range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 3.5mm pitch. The LM 3.50/90 series from Weidmüller have a fully automatic assembly using wave soldering and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 12
Solder pin length of 3.2mm
Pitch of 3.5mm
Conductor outlet direction of 90°
Clamping yoke via screw connection
Wire connection cross section from AWG 28 to AWG 14
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 3.5mm to 5mm depending on the number of poles required
Rated current for minimum number of poles 16A (IEC) and 10A (UL)
Orange in colour
Packaged in Boxes
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LM 3.50/90 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LM 3.50/90 Series appeared first on Rhopoint Components.

Weidmüller LM 5.08/90 Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LM 5.08/90 PCB terminal series from Weidmüller’s Omnimate signal range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 2 up to 24 poles and a 5.08mm pitch. The LM 5.08/90 series from Weidmüller have a fully automatic assembly using wave soldering and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 24
Solder pin length of 3.5mm
Pitch of 5.08mm
Conductor outlet direction of 90°
Clamping yoke via screw connection
Wire connection cross section from AWG 24 to AWG 14
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 5.08mm to 119.84mm depending on the number of poles required
Rated current for minimum number of poles 17.5A (IEC) and 15A (UL)
Orange in colour
Packaged in Boxes
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LM 5.08/90 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LM 5.08/90 Series appeared first on Rhopoint Components.

Weidmüller LSF-SMT 5.08/90 Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LSF-SMT 5.08/90 PCB terminal series from Weidmüller’s Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 5.08mm pitch. The LSF-SMT 5.08/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Through-hole technology with reflow soldering
Number of poles available from 2 to 8
Solder pin length of 3.5mm
Pitch of 5.08mm
Conductor outlet direction of 90°
Wire connection cross section from AWG 28 to AWG 14
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 5.08mm to 35.56mm depending on the number of poles required
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Packaged in tubes
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 5.08/90 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LSF-SMT 5.08/90 Series appeared first on Rhopoint Components.

Weidmüller LSF-SMD 3.50/180 Series

Admin — Mon, 23 Nov 2020 20:54:09 +0000

The LSF-SMD 3.50/180 PCB terminal series from Weidmüller’s Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 12 poles and a 3.5mm pitch. The LSF-SMD 3.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Mounting onto PCB with reflow soldering
Number of poles available from 2 to 12
Pitch of 3.5mm
Conductor outlet direction of 180°
Wire connection cross section from AWG 28 to AWG 14
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 3.5mm to 38.5mm depending on the number of poles required
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Packaged in tape on reel
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 3.50/180 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LSF-SMD 3.50/180 Series appeared first on Rhopoint Components.

Weidmüller LSF-SMD 5.00/90 Series

Admin — Mon, 23 Nov 2020 20:54:09 +0000

The LSF-SMD 5.00/90 PCB terminal series from Weidmüller’s Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 5mm pitch. The LSF-SMD 5.00/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Mounting onto PCB with reflow soldering
Number of poles available from 2 to 7
Pitch of 5mm
Conductor outlet direction of 90°
Wire connection cross section from AWG 28 to AWG 14
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 5mm to 35mm depending on the number of poles required
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Packaged in tape on reel
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 3.50/90 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LSF-SMD 5.00/90 Series appeared first on Rhopoint Components.

Weidmüller LSF-SMD 7.50/180 Series

Admin — Mon, 23 Nov 2020 20:54:09 +0000

The LSF-SMD 7.50/180 PCB terminal series from Weidmüller’s Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 12 poles and a 7.5mm pitch. The LSF-SMD 7.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Mounting onto PCB with reflow soldering
Number of poles available from 2 to 6
Pitch of 7.5mm
Conductor outlet direction of 180°
Wire connection cross section from AWG 28 to AWG 14
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 7.5mm to 37.5mm depending on the number of poles required
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Packaged in tape on reel
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 7.50/180 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LSF-SMD 7.50/180 Series appeared first on Rhopoint Components.

Weidmüller LSF-SMT 3.50/180 series

Admin — Mon, 23 Nov 2020 20:54:09 +0000

The LSF-SMT 3.50/180 PCB terminal series from Weidmüller’s Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 24 poles and a 3.5mm pitch. The LSF-SMT 3.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Through-hole technology with reflow soldering
Number of poles available from 2 to 24
Solder pin length of 3.5mm
Pitch of 3.5mm
Conductor outlet direction of 180°
Wire connection cross section from AWG 28 to AWG 14
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 3.5mm to 80.5mm depending on the number of poles required
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Packaged in tubes
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 3.50/180 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LSF-SMT 3.50/180 series appeared first on Rhopoint Components.

Weidmüller LSF-SMT 7.50/180 Series

Admin — Mon, 23 Nov 2020 20:54:09 +0000

The LSF-SMT 7.50/180 PCB terminal series from Weidmüller’s Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 8 poles and a 7.5mm pitch. The LSF-SMT 7.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Through-hole technology with reflow soldering
Number of poles available from 2 to 8
Solder pin length of 3.5mm
Pitch of 7.5mm
Conductor outlet direction of 180°
Wire connection cross section from AWG 28 to AWG 14
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 7.5mm to 52.5mm depending on the number of poles required
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Packaged in tubes
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 7.50/180 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LSF-SMT 7.50/180 Series appeared first on Rhopoint Components.

Weidmüller LSF-SMD 3.50/90 Series

Admin — Mon, 23 Nov 2020 20:54:09 +0000

The LSF-SMD 3.50/90 PCB terminal series from Weidmüller’s Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 12 poles and a 3.5mm pitch. The LSF-SMD 3.50/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Mounting onto PCB with reflow soldering
Number of poles available from 2 to 12
Pitch of 3.5mm
Conductor outlet direction of 90°
Wire connection cross section from AWG 28 to AWG 14
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 3.5mm to 38.5mm depending on the number of poles required
Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
Packaged in tape on reel
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 3.50/90 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LSF-SMD 3.50/90 Series appeared first on Rhopoint Components.