PCB Signal Connectors - Weidmüller OMNIMATE - Rhopoint Components

Weidmüller SL-SMT 3.50/180G Series

Admin — Mon, 23 Nov 2020 20:56:56 +0000

The SL-SMT 3.50/180G male header PCB plug in connector series from Weidmüller’s Omnimate signal range has been designed with a conductor outlet direction of 180°. They have a 3.5mm pitch and a choice from 2 up to 24 poles. The SL-SMT 3.50/180G series from Weidmüller have a closed housing and are suitable for reflow (THR) and wave (THT) soldering. These PCB plug-in connectors have an operating temperature range of −50°C up to +100°C .

PCB plug in connector with male header
Through-hole technology suitable for reflow or wave soldering
Number of poles available from 2 to 24
Solder pin length of 3.2mm
Pitch of 3.5mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 3.5mm to 80.5mm depending on the number of poles required
Rated current for minimum number of poles 15A (IEC) and 10A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +100°C

The below table gives the specifications of the Weidmüller SL-SMT 3.50/180G PCB connector series:

* Poles 2 to 9 ±0.1mm, poles 10 to 13 ±0.15mm and poles 14 to 24 ±0.2mm

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller SL-SMT 3.50/180G Series appeared first on Rhopoint Components.

Weidmüller BL 3.50/180 Series

Admin — Mon, 23 Nov 2020 20:56:56 +0000

The BL 3.50/180 female PCB plug in connector series from Weidmüller’s Omnimate signal range has been designed with a conductor outlet direction of 180°. They have a 3.5mm pitch and a choice from 2 up to 24 poles. The BL 3.50/180 series from Weidmüller have a clamping yoke screw connection. These connectors have an operating temperature range of −50°C up to +100°C .

Female plug in connector
Clamping yoke via screw connection
Number of poles available from 2 to 24
Clamping range from 0.08 mm² to 1.5mm²
Wire connection cross section from AWG 28 to AWG 14
Pitch of 3.5mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 3.5mm to 80.5mm depending on the number of poles required
Rated current for minimum number of poles 17A (IEC) and 10A (UL)
Orange in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +100°C

The below table gives the specifications of the Weidmüller BL 3.50/180 PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller BL 3.50/180 Series appeared first on Rhopoint Components.

Weidmüller BLF 3.50/180 Series

Admin — Mon, 23 Nov 2020 20:56:56 +0000

The BLF 3.50/180 female PCB plug in connector series from Weidmüller’s Omnimate signal range has been designed with a conductor outlet direction of 180°. They have a 3.5mm pitch and a choice from 2 up to 24 poles. The BLF 3.50/180 series from Weidmüller have a push in spring connection. These connectors have an operating temperature range of −50°C up to +120°C .

Female plug in connector
Push in spring connection
Number of poles available from 2 to 24
Clamping range from 0.14 mm² to 1.5mm²
Wire connection cross section from AWG 26 to AWG 16
Pitch of 3.5mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 3.5mm to 80.5mm depending on the number of poles required
Rated current for minimum number of poles 17.5A (IEC) and 10A (UL)
Orange in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +120°C

The below table gives the specifications of the Weidmüller BLF 3.50/180 PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller BLF 3.50/180 Series appeared first on Rhopoint Components.

Weidmüller SL 5.08HC/180B Series

Admin — Mon, 23 Nov 2020 20:56:56 +0000

The SL 5.08HC/180B high current male header, PCB plug in connector series from Weidmüller’s Omnimate signal range has been designed with a conductor outlet direction of 180°. With a 5.08mm pitch and a choice from 2 up to 24 poles. The SL 5.08HC/180B series from Weidmüller have a high current of 24A (IEC) or 18.5A (UL approved) these connectors can be used in a fully automatic assembly using wave soldering (THT). These PCB plug-in connectors have an operating temperature range of −50°C up to +100°C .

PCB plug in connector with male header
Through-hole technology with wave soldering
Number of poles available from 2 to 24
Solder pin length of 3.2mm
Pitch of 5.08mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 5.08mm to 116.84mm depending on the number of poles required
Rated current for minimum number of poles 17A (IEC) and 10A (UL)
Orange in colour
Packaged in box
Temperature range −50°C up to +100°C

The below table gives the specifications of the Weidmüller SL 3.50/180G PCB connector series:

* Poles 2 to 9 ±0.1mm, poles 10 to 13 ±1.5mm and poles 14 to 24 ±2mm

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller SL 5.08HC/180B Series appeared first on Rhopoint Components.

Weidmüller BLZP 5.08HC/180 Series

Admin — Mon, 23 Nov 2020 20:56:56 +0000

The BLZP 5.08HC/180 high current, female PCB plug in connector series from Weidmüller’s Omnimate signal range has been designed with a conductor outlet direction of 180°. They have a 5.08mm pitch and a choice from 2 up to 24 poles. The BLZP 5.08HC/180 series from Weidmüller have a clamping yoke screw connection with a high current rating of 23A (IEC) or 20A (UL approved). These connectors have an operating temperature range of −50°C up to +100°C .

High current female plug in connector
Clamping yoke via screw connection
Number of poles available from 2 to 24
Clamping range from 0.13 mm² to 4mm²
Wire connection cross section from AWG 30 to AWG 12
Pitch of 5.08mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 5.08mm to 116.84mm depending on the number of poles required
Rated current for minimum number of poles 23A (IEC) and 20A (UL)
Orange in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +100°C

The below table gives the specifications of the Weidmüller BLZP 5.08/180 PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller BLZP 5.08HC/180 Series appeared first on Rhopoint Components.

Weidmüller BLF 5.08HC/180 Series

Admin — Mon, 23 Nov 2020 20:56:56 +0000

The BLF 5.08HC/180 high current, female PCB plug in connector series from Weidmüller’s Omnimate signal range has been designed with a conductor outlet direction of 180°. With a 5.08mm pitch and a choice from 2 up to 24 poles. The BLF 5.08HC/180 series from Weidmüller have a push in tension clamp connection with a high current rating of 24A (IEC) or 18.5A (UL approved). These connectors have an operating temperature range of −50°C up to +100°C .

High current female plug in connector
Push in tension clamp connection
Number of poles available from 2 to 24
Clamping range from 0.13 mm² to 3.31mm²
Wire connection cross section from AWG 26 to AWG 12
Pitch of 5.08mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 5.08mm to 116.84mm depending on the number of poles required
Rated current for minimum number of poles 24A (IEC) and 18.5A (UL)
Orange in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +100°C

The below table gives the specifications of the Weidmüller BLF 5.08HC/180 PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller BLF 5.08HC/180 Series appeared first on Rhopoint Components.

Weidmüller SL-SMT 3.50/90G Series

Admin — Mon, 23 Nov 2020 20:56:56 +0000

The SL-SMT 3.50/90G male header PCB plug in connector series from Weidmüller’s Omnimate signal range has been designed with a conductor outlet direction of 90°. They have a 3.5mm pitch and a choice from 2 up to 24 poles. The SL-SMT 3.50/90G series from Weidmüller have a closed housing and are suitable for reflow (THR) and wave (THT) soldering. These PCB plug-in connectors have an operating temperature range of −50°C up to +100°C .

PCB plug in connector with male header
Through-hole technology suitable for reflow or wave soldering
Number of poles available from 2 to 24
Solder pin length of 3.2mm
Pitch of 3.5mm
Conductor outlet direction of 90°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 3.5mm to 80.5mm depending on the number of poles required
Rated current for minimum number of poles 15A (IEC) and 10A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +100°C

The below table gives the specifications of the Weidmüller SL-SMT 3.50/90G PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller SL-SMT 3.50/90G Series appeared first on Rhopoint Components.

Weidmüller SL 2.50/90G Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The SL 2.50/90G male header PCB plug in connector series from Weidmüller’s Omnimate signal range has been designed with a conductor outlet direction of 90°. They have a 2.5mm pitch and a choice from 2 up to 12 poles. The SL 2.50/90G series from Weidmüller have a closed housing and can be used in a fully automatic assembly using wave soldering (THT). These PCB plug-in connectors have an operating temperature range of −40°C up to +105°C .

PCB plug in connector with male header
Through-hole technology with wave soldering
Number of poles available from 2 to 12
Solder pin length of 3.2mm
Pitch of 2.5mm
Conductor outlet direction of 90°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 2.5mm to 27.5mm depending on the number of poles required
Rated current for minimum number of poles 6A (IEC) and 5A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C up to +105°C

The below table gives the specifications of the Weidmüller SL 2.50/90G PCB connector series:

* Poles 2 to 8 ±0.1mm and poles 9 to 12 ±0.15mm

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller SL 2.50/90G Series appeared first on Rhopoint Components.

Weidmüller BLF 2.50/180 Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The BLF 2.50/180 female plug PCB plug in connector series from Weidmüller’s Omnimate signal range has been designed with a conductor outlet direction of 180°. They have a 2.5mm pitch and a choice from 2 up to 12 poles. The BLF 2.50/180 series from Weidmüller have a push in spring connection with integrated push buttons for opening the terminal point. These connectors have an operating temperature range of −40°C up to +105°C .

Female plug in connector
Push in spring connection with integrated push buttons for opening the terminal point
Number of poles available from 2 to 12
Wire connection cross section from AWG28 (0.08mm²) to AWG 20 (0.5mm²)
Pitch of 2.5mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 2.5mm to 27.5mm depending on the number of poles required
Rated current for minimum number of poles 6A (IEC) and 5A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C up to +120°C

The below table gives the specifications of the Weidmüller BLF 2.50/180 PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller BLF 2.50/180 Series appeared first on Rhopoint Components.

Weidmüller S2C-SMT 3.50/180G Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The S2C-SMT 3.50/180G male header PCB plug in connector series from Weidmüller’s Omnimate signal range has been designed with a conductor outlet direction of 180°. They have a 3.5mm pitch and a choice from 4 up to 36 poles in 2 rows. The S2C-SMT 3.50/180G series from Weidmüller have a closed housing and can be used in a fully automatic assembly using wave (THT) or reflow (THR) soldering. These PCB plug-in connectors have an operating temperature range of −50°C up to +120°C .

PCB plug in connector with male header
Through-hole technology with wave(THT) or reflow(THR) soldering
Number of poles available from 4 to 36 in 2 rows
Solder pin length of 3.5mm
Pitch of 3.5mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 3.5mm to 59.5mm depending on the number of poles required
Rated current for minimum number of poles 13.4A (IEC) and 10A (UL)
Black in colour
Packaged in box or tape on reel
Temperature range −50°C up to +120°C

The below table gives the specifications of the Weidmüller S2C-SMT 3.50/180G connector series:

* Poles 4 to 24 1.3mm and Poles 26 to 36 1.4mm

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller S2C-SMT 3.50/180G Series appeared first on Rhopoint Components.