PCB Power Terminals - Weidmüller OMNIMATE - Rhopoint Components

Weidmüller LLF 7.50/90V Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LLF 7.50/90V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 7.5mm pitch. The LLF 7.50/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 12
Solder pin length of 5mm
Pitch of 7.5mm
Conductor outlet direction of 90°
Push in technology with actuator
Wire connection cross section from AWG 24 to AWG 8
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 7.5mm to 82.5mm depending on the number of poles required
Rated current for minimum number of poles 41A (IEC) and 35A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C to +120°C

Typical applications for the LLF 7.50/90V series include:

Solar inverters
Frequency converters
Servo-controllers
Power Supplies

The below table gives the specifications of the Weidmüller LLF 7.50/90V PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LLF 7.50/90V Series appeared first on Rhopoint Components.

Weidmüller LLFS 7.50/180V Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LLFS 7.50/180V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 12 poles and a 7.5mm pitch. The LLFS 7.50/180V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 12
Solder pin length of 5mm
Pitch of 7.5mm
Conductor outlet direction of 180°
Push in technology
Wire connection cross section from AWG 24 to AWG 8
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 7.5mm to 82.5mm depending on the number of poles required
Rated current for minimum number of poles 41A (IEC) and 37A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C to +120°C

The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LLFS 7.50/180V series include:

Solar inverters
Frequency converters
Servo-controllers
Power Supplies

The below table gives the specifications of the Weidmüller LLFS 7.50/180V PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LLFS 7.50/180V Series appeared first on Rhopoint Components.

Weidmüller LUF 10.00/90V Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LUF 10.00/90V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 10mm pitch. The LLF 10.00/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 12
Solder pin length of 5mm
Pitch of 10mm
Conductor outlet direction of 90°
Push in technology with actuator
Wire connection cross section from AWG 18 to AWG 6
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 10mm to 110mm depending on the number of poles required
Rated current for minimum number of poles 76A (IEC) and 58A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C to +120°C

The below table gives the specifications of the Weidmüller LUF 10.00/90V PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LUF 10.00/90V Series appeared first on Rhopoint Components.

Weidmüller LUF 15.00/90V Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LUF 15.00/90V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 8 poles and a 15mm pitch. The LUF 15.00/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 8
Solder pin length of 5mm
Pitch of 15mm
Conductor outlet direction of 90°
Push in technology with actuator
Wire connection cross section from AWG 18 to AWG 4
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 15mm to 105mm depending on the number of poles required
Rated current for minimum number of poles 68A (IEC) and 58A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C to +120°C

The Study, direct connections for extreme current and voltage requirements in all power applications for the LLFS 15.00/90V series include:

Solar inverters
Frequency converters
Servo-controllers
Power Supplies

The below table gives the specifications of the Weidmüller LUF 10.00/90V PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LUF 15.00/90V Series appeared first on Rhopoint Components.

Weidmüller LUFS 10.00/180V Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LUFS 10.00/180V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push-in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 12 poles and a 10mm pitch. The LUFS 10.00/180V series from Weidmüller has a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 12
Solder pin length of 5mm
Pitch of 10mm
Conductor outlet direction of 180°
Push in technology
Integrated test point for PS2.0 test plug
Wire connection cross section from AWG 18 to AWG 4
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 10mm to 110mm depending on the number of poles required
Rated current for minimum number of poles 76A (IEC) and 57A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C to +120°C

The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LUFS 10.00/180V series include:

Solar inverters
Frequency converters
Servo-controllers
Power supplies

The below table gives the specifications of the Weidmüller LUFS 10.00/180V PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LUFS 10.00/180V Series appeared first on Rhopoint Components.

Weidmüller LUFS 15.00/180V Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LUFS 15.00/180V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 8 poles and a 15mm pitch. The LUFS 15.00/180V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 8
Solder pin length of 5mm
Pitch of 15mm
Conductor outlet direction of 180°
Push in technology without actuator
Wire connection cross section from AWG 18 to AWG 4
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 15mm to 105mm depending on the number of poles required
Rated current for minimum number of poles 76A (IEC) and 57A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C to +120°C

The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LUFS 15.00/180V series include:

Solar inverters
Frequency converters
Servo-controllers
Power supplies

The below table gives the specifications of the Weidmüller LUFS 15.00/180V PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LUFS 15.00/180V Series appeared first on Rhopoint Components.

Weidmüller LU 10.16/90 Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LU 10.16/90 PCB terminal series from Weidmüller’s Omnimate power range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 2 up to 10 poles and a 10.16mm pitch. The LU 10.16/90 series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 10
Solder pin length of 4.5mm
Pitch of 10.16mm
Conductor outlet direction of 90°
Clamping yoke via screw connection
Wire connection cross section from AWG 22 to AWG 8
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 10.16mm to 91.44mm depending on the number of poles required
Rated current for minimum number of poles 76A (IEC) and 65A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LU 10.16/90 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LU 10.16/90 Series appeared first on Rhopoint Components.

Weidmüller LX 15.00/90 Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LX 15.00/90 PCB terminal series from Weidmüller’s Omnimate power range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 1 up to 9 poles and a 15mm pitch. The LX 15.00/90 series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 1 to 9
Solder pin length of 4.5mm
Pitch of 15mm
Conductor outlet direction of 90°
Clamping yoke via screw connection
Wire connection cross section from AWG 16 to AWG 4
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 0mm to 135mm depending on the number of poles required
Rated current for minimum number of poles 101A (IEC) and 85A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LX 15.00/90 PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LX 15.00/90 Series appeared first on Rhopoint Components.