OMNIMATE® Power connector range - Rhopoint Components

Weidmüller SU 10.16HP/180G Series

Admin — Mon, 23 Nov 2020 20:57:51 +0000

The SU 10.16HP/180G high current, male header PCB plug in connector series from Weidmüller’s Omnimate power range, has been designed with a conductor outlet direction of 180°. They have a 10.16mm pitch and a choice from 2 up to 9 poles. The SU 10.16HP/180G series from Weidmüller with a high current rating of 78.3A (IEC) and 60A (UL approved), closed housing and are suitable for wave (THT) soldering. These PCB plug-in connectors have an operating temperature range of −50°C up to +120°C .

High current PCB plug in connector with male header
Through-hole technology suitable for wave soldering
Number of poles available from 2 to 9
Solder pin length of 3.5mm
Pitch of 10.16mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 10.16mm to 81.28mm depending on the number of poles required
Rated current for minimum number of poles 78.3A (IEC) and 60A (UL approved)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +120°C

The below table gives the specifications of the Weidmüller SL-SMT 3.50/180G PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller SU 10.16HP/180G Series appeared first on Rhopoint Components.

Weidmüller BUZ 10.16HP/180 Series

Admin — Mon, 23 Nov 2020 20:57:51 +0000

The BUZ 10.16HP/180 high power, female PCB plug in connector series from Weidmüller’s Omnimate power range has been designed with a conductor outlet direction of 180°. With a 10.16mm pitch and a choice from 2 up to 9 poles. The BUZ 10.16HP/180 series from Weidmüller have a clamping yoke screw connection with a high current rating of 78.3A (IEC) and 60A (UL approved). These connectors have an operating temperature range of −50°C up to +130°C .

High power female plug in connector
clamping yoke via screw connection
Number of poles available from 2 to 9
Clamping range from 0.2 mm² to 16 mm²
Wire connection cross section from AWG 22 to AWG 6
Pitch of 10.16mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 10.16mm to 81.28mm depending on the number of poles required
Rated current for minimum number of poles 78.3A (IEC) and 60A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +130°C

The below table gives the specifications of the Weidmüller BUZ 10.16HP/180 PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller BUZ 10.16HP/180 Series appeared first on Rhopoint Components.

Weidmüller BVF 7.62HP/180 Series

Admin — Mon, 23 Nov 2020 20:57:51 +0000

The BVF 7.62HP/180 high power, female PCB plug in connector series from Weidmüller’s Omnimate power range has been designed with a conductor outlet direction of 180°. With a 7.62mm pitch and a choice from 2 up to 7 poles. The BVF 7.62HP/180 series from Weidmüller have a push in plug in connection with a high current rating of 57A (IEC) and 39A (UL approved). These connectors have an operating temperature range of −50°C up to +125°C .

High power female plug in connector
clamping yoke screw connection
Number of poles available from 2 to 7
Clamping range from 0.5 mm² to 10 mm²
Wire connection cross section from AWG 24 to AWG 8
Pitch of 7.62mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 7.62mm to 45.62mm depending on the number of poles required
Rated current for minimum number of poles 78.3A (IEC) and 60A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +125°C

The below table gives the specifications of the Weidmüller BVF 7.62HP/180 PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller BVF 7.62HP/180 Series appeared first on Rhopoint Components.

Weidmüller SV 7.62HP/180G Series

Admin — Mon, 23 Nov 2020 20:56:56 +0000

The SV 7.62HP/180G high power, male header PCB plug in connector series from Weidmüller’s Omnimate power range, has been designed with a conductor outlet direction of 180°. They have a 7.62mm pitch and a choice from 2 up to 12 poles. The SV 7.62HP/1800G series from Weidmüller with a high power rating of 57A (IEC) and 40.5A (UL approved), closed housing and are suitable for wave (THT) soldering. These PCB plug-in connectors have an operating temperature range of −50°C up to +130°C .

High power PCB plug in connector with male header
Through-hole technology suitable for wave soldering
Number of poles available from 2 to 12
Solder pin length of 3.5mm
Pitch of 7.62mm
Conductor outlet direction of 180°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 7.62mm to 83.82mm depending on the number of poles required
Rated current for minimum number of poles 57A (IEC) and 40.5A (UL approved)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +130°C

The below table gives the specifications of the Weidmüller SV 7.62HP/180G PCB connector series:

* Poles 2 to 9 ±0.1mm and poles 10 to 12 ±0.15mm

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller SV 7.62HP/180G Series appeared first on Rhopoint Components.

Weidmüller SV 7.62HP/90G Series

Admin — Mon, 23 Nov 2020 20:56:56 +0000

The SV 7.62HP/90G high power, male header PCB plug in connector series from Weidmüller’s Omnimate power range, has been designed with a conductor outlet direction of 90°. They have a 7.62mm pitch and a choice from 2 up to 12 poles. The SV 7.62HP/90G series from Weidmüller with a high power rating of 57A (IEC) and 40.5A (UL approved), closed housing and are suitable for wave (THT) soldering. These PCB plug-in connectors have an operating temperature range of −30°C up to +130°C .

High power PCB plug in connector with male header
Through-hole technology suitable for wave soldering
Number of poles available from 2 to 12
Solder pin length of 3.5mm
Pitch of 7.62mm
Conductor outlet direction of 90°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 7.62mm to 83.82mm depending on the number of poles required
Rated current for minimum number of poles 57A (IEC) and 40.5A (UL approved)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −30°C up to +130°C

The below table gives the specifications of the Weidmüller SV 7.62HP/90G PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller SV 7.62HP/90G Series appeared first on Rhopoint Components.

Weidmüller SU 10.16HP/90G Series

Admin — Mon, 23 Nov 2020 20:56:56 +0000

The SU 10.16HP/90G high current, male header PCB plug in connector series from Weidmüller’s Omnimate power range, has been designed with a conductor outlet direction of 90°. They have a 10.16mm pitch and a choice from 2 up to 9 poles. The SU 10.16HP/90G series from Weidmüller with a high current rating of 78.3A (IEC) and 60A (UL approved), closed housing and are suitable for wave (THT) soldering. These PCB plug-in connectors have an operating temperature range of −50°C up to +120°C .

High current PCB plug in connector with male header
Through-hole technology suitable for wave soldering
Number of poles available from 2 to 9
Solder pin length of 3.5mm
Pitch of 10.16mm
Conductor outlet direction of 90°
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 10.16mm to 81.28mm depending on the number of poles required
Rated current for minimum number of poles 78.3A (IEC) and 60A (UL approved)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −50°C up to +120°C

The below table gives the specifications of the Weidmüller SL-SMT 3.50/90G PCB connector series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller SU 10.16HP/90G Series appeared first on Rhopoint Components.

Weidmüller LLF 7.50/90V Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LLF 7.50/90V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 7.5mm pitch. The LLF 7.50/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 12
Solder pin length of 5mm
Pitch of 7.5mm
Conductor outlet direction of 90°
Push in technology with actuator
Wire connection cross section from AWG 24 to AWG 8
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 7.5mm to 82.5mm depending on the number of poles required
Rated current for minimum number of poles 41A (IEC) and 35A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C to +120°C

Typical applications for the LLF 7.50/90V series include:

Solar inverters
Frequency converters
Servo-controllers
Power Supplies

The below table gives the specifications of the Weidmüller LLF 7.50/90V PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LLF 7.50/90V Series appeared first on Rhopoint Components.

Weidmüller LLFS 7.50/180V Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LLFS 7.50/180V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 12 poles and a 7.5mm pitch. The LLFS 7.50/180V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 12
Solder pin length of 5mm
Pitch of 7.5mm
Conductor outlet direction of 180°
Push in technology
Wire connection cross section from AWG 24 to AWG 8
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 7.5mm to 82.5mm depending on the number of poles required
Rated current for minimum number of poles 41A (IEC) and 37A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C to +120°C

The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LLFS 7.50/180V series include:

Solar inverters
Frequency converters
Servo-controllers
Power Supplies

The below table gives the specifications of the Weidmüller LLFS 7.50/180V PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LLFS 7.50/180V Series appeared first on Rhopoint Components.

Weidmüller LUF 10.00/90V Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LUF 10.00/90V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 10mm pitch. The LLF 10.00/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 12
Solder pin length of 5mm
Pitch of 10mm
Conductor outlet direction of 90°
Push in technology with actuator
Wire connection cross section from AWG 18 to AWG 6
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 10mm to 110mm depending on the number of poles required
Rated current for minimum number of poles 76A (IEC) and 58A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C to +120°C

The below table gives the specifications of the Weidmüller LUF 10.00/90V PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LUF 10.00/90V Series appeared first on Rhopoint Components.

Weidmüller LUF 15.00/90V Series

Admin — Mon, 23 Nov 2020 20:55:10 +0000

The LUF 15.00/90V PCB terminal series from Weidmüller’s Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 8 poles and a 15mm pitch. The LUF 15.00/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

PCB terminal connector
Through-hole technology with wave soldering
Number of poles available from 2 to 8
Solder pin length of 5mm
Pitch of 15mm
Conductor outlet direction of 90°
Push in technology with actuator
Wire connection cross section from AWG 18 to AWG 4
CSA and UL 1059 approved, IEC listed
Dimmensions for L1 from 15mm to 105mm depending on the number of poles required
Rated current for minimum number of poles 68A (IEC) and 58A (UL)
Black in colour (additional colours available on request)
Packaged in box
Temperature range −40°C to +120°C

The Study, direct connections for extreme current and voltage requirements in all power applications for the LLFS 15.00/90V series include:

Solar inverters
Frequency converters
Servo-controllers
Power Supplies

The below table gives the specifications of the Weidmüller LUF 10.00/90V PCB terminal series:

Please see the relevant datasheet in the technical library for the exact specification

The post Weidmüller LUF 15.00/90V Series appeared first on Rhopoint Components.