Thermocouples - Rhopoint Components https://www.rhopointcomponents.com/product-category/sensors/temperature-sensors/thermocouples/ Electronic Components, Sensors, Connectors & Enclosures Thu, 22 Feb 2024 12:06:35 +0000 en-GB hourly 1 https://www.rhopointcomponents.com/wp-content/uploads/2020/09/cropped-rc-marble-100x100.png Thermocouples - Rhopoint Components https://www.rhopointcomponents.com/product-category/sensors/temperature-sensors/thermocouples/ 32 32 RdF 20100 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/thermocouples/rdf-20100-series/ Mon, 23 Nov 2020 20:57:51 +0000 https://components.rhopoint.com/product/rdf-20100-series/
  • Butt bonded foil thermocouple
  • Micro-foil® thickness of 0.0128mm (0.0005")
  • Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
  • 2 wire configuration
  • Removable Kapton® frame for bare foil applications
  • Standard lead length of 6", additional lengths available on request

    • The post RdF 20100 Series appeared first on Rhopoint Components.

    ]]>     The 20100 butt bonded foil type K (Chromel/Alumel) thermocouple temperature sensor series from RdF offer high performance and are ideal for demanding applications. These surface thermocouples provide an accuracy of ±2.2°C or ±2% with a fast response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type K thermocouple offers an operating temperature range of -184°C up to +816°C. The 20100 series from RDF utilises butt bonding which produces thermocouples with no increase in thickness or mass at the junction. This offers a micro-foil® thickness of 0.0128mm (0.0005″). The sensors have a removable Kapton® frame for bare foil application.

    • Butt bonded foil thermocouple
    • Type K (Chromel/Alumel)
    • Accuracy of ±2.2°C or ±2%
    • Temperature range -184°C to +816°C
    • Operating current of 0.5mA
    • Micro-foil® thickness of 0.0128mm (0.0005″)
    • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
    • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
    • Lead wires are dot colour coded ribbon leads
    • Standard lead length 6″, additional lengths available upon request
    • Removable Kapton® case material for bare foil applications

    The post RdF 20100 Series appeared first on Rhopoint Components.

    ]]>         RdF 20101 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/thermocouples/rdf-20101-series/ Mon, 23 Nov 2020 20:57:51 +0000 https://components.rhopoint.com/product/rdf-20101-series/
  • Butt bonded foil thermocouple
  • Micro-foil® thickness of 0.0128mm (0.0005")
  • Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
  • 2 wire configuration
  • Removable Kapton® frame for bare foil applications
  • Standard lead length of 6", additional lengths available on request

    • The post RdF 20101 Series appeared first on Rhopoint Components.

    ]]>     The 20101 butt bonded foil type E (Chromel/Constantan) thermocouple temperature sensor series from RdF offer high performance and are ideal for demanding applications. These surface thermocouples provide an accuracy of ±1.7°C or ±0.5% with a fast response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type E thermocouple offers an operating temperature range of -200°C up to +900°C. The 20101 series from RDF utilises butt bonding which produces thermocouples with no increase in thickness or mass at the junction. This offers a micro-foil® thickness of 0.0128mm (0.0005″). The sensors have a removable Kapton® frame for bare foil application.

    • Butt bonded foil thermocouple
    • Type E (Chromel/Constantan)
    • Accuracy of ±1.7°C or ±0.5%
    • Temperature range -200°C up to +900°C
    • Operating current of 0.5mA
    • Micro-foil® thickness of 0.0128mm (0.0005″)
    • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
    • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
    • Lead wires are dot colour coded ribbon leads
    • Standard lead length 6″, additional lengths available upon request
    • Removable Kapton® case material for bare foil applications

    The post RdF 20101 Series appeared first on Rhopoint Components.

    ]]>         RdF 20102 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/thermocouples/rdf-20102-series/ Mon, 23 Nov 2020 20:57:51 +0000 https://components.rhopoint.com/product/rdf-20102-series/
  • Butt bonded foil thermocouple
  • Micro-foil® thickness of 0.0128mm (0.0005")
  • Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
  • 2 wire configuration
  • Removable Kapton® frame for bare foil applications
  • Standard lead length of 6", additional lengths available on request

    • The post RdF 20102 Series appeared first on Rhopoint Components.

    ]]>     The 20102 butt bonded foil type T (Copper/Constantan) thermocouple temperature sensor series from RdF offer high performance and are ideal for demanding applications. These surface thermocouples provide an accuracy of ±1°C or ±0.75% with a fast response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type T thermocouple offers an operating temperature range of -250°C up to +350°C. The 20102 series from RDF utilises butt bonding which produces thermocouples with no increase in thickness or mass at the junction. This offers a micro-foil® thickness of 0.0128mm (0.0005″). The sensors have a removable Kapton® frame for bare foil application.

    • Butt bonded foil thermocouple
    • Type T (Copper/Constantan)
    • Accuracy of ±1°C or ±0.75%
    • Temperature range -250°C up to +350°C
    • Operating current of 0.5mA
    • Micro-foil® thickness of 0.0128mm (0.0005″)
    • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
    • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
    • Lead wires are dot colour coded ribbon leads
    • Standard lead length 6″, additional lengths available upon request
    • Removable Kapton® case material for bare foil applications

    The post RdF 20102 Series appeared first on Rhopoint Components.

    ]]>         RdF 26721 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/thermocouples/rdf-26721-series/ Mon, 23 Nov 2020 20:57:51 +0000 https://components.rhopoint.com/product/rdf-26721-series/
  • Stikon® type E thermocouple
  • Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
  • 2 wire configuration
  • Kapton® case material
  • Embeded in a paper thin laminate

    • The post RdF 26721 Series appeared first on Rhopoint Components.

    ]]>     The 26721 Stikon® type E (Chromel/Constantan) thermocouple temperature sensor series from RdF are embedded in a paper thin laminate intended for surface temperature measurement applications. These thermocouples have a response time of 0.25s (grounded) and 0.5s (ungrounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type E thermocouple offers an operating temperature range of -184°C up to +260°C (continuous), +371°C (short term) and provides an accuracy of ±1.7°C or ±0.5%. The 26721 series from RDF are without pre-applied cement so you can select the adhesive or clamp for extended temperature capability. These thermocouples use a Kapton® case material.

    • Stikon® Thermocouple
    • Type E (Chromel/Constantan)
    • Accuracy of ±1.7°C or ±0.5%
    • Temperature range of -184°C up to +260°C (continuous), +371°C (short term)
    • Operating current of 0.5mA
    • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
    • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
    • Lead wires 30AWG solid T/C wire with fiberglass insulation and overwrap, parallel lay
    • Kapton® case material

    The post RdF 26721 Series appeared first on Rhopoint Components.

    ]]>         RdF 26722 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/thermocouples/rdf-26722-series/ Mon, 23 Nov 2020 20:57:51 +0000 https://components.rhopoint.com/product/rdf-26722-series/
  • Stikon® type E thermocouple
  • Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
  • 2 wire configuration
  • Kapton® case material
  • Embeded in a paper thin laminate

    • The post RdF 26722 Series appeared first on Rhopoint Components.

    ]]>     The 26722 Stikon® type T (Copper/Constantan) thermocouple temperature sensor series from RdF are embedded in a paper thin laminate intended for surface temperature measurement applications. These thermocouples have a response time of 0.25s (grounded) and 0.5s (ungrounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type T thermocouple offers an operating temperature range of -184°C up to +260°C (continuous), +371°C (short term) and provides an accuracy of ±1°C or ±0.75%. The 26722 series from RDF are without pre-applied cement so you can select the adhesive or clamp for extended temperature capability. These thermocouples use a Kapton® case material.

    • Stikon® thermocouple
    • Type T (Copper/Constantan)
    • Accuracy of ±1°C or ±0.75%
    • Temperature range of -184°C up to +260°C (continuous), +371°C (short term)
    • Operating current of 0.5mA
    • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
    • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
    • Lead wires 30AWG solid T/C wire with fiberglass insulation and overwrap, parallel lay
    • Kapton® case material

    The post RdF 26722 Series appeared first on Rhopoint Components.

    ]]>         RdF 26723 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/thermocouples/rdf-26723-series/ Mon, 23 Nov 2020 20:57:51 +0000 https://components.rhopoint.com/product/rdf-26723-series/
  • Stikon® type K thermocouple
  • Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
  • 2 wire configuration
  • Kapton® case material
  • Embeded in a paper thin laminate

    • The post RdF 26723 Series appeared first on Rhopoint Components.

    ]]>     The 26723 Stikon® type K (Chromel/Alumel) thermocouple temperature sensor series from RdF are embedded in a paper thin laminate intended for surface temperature measurement applications. These thermocouples have a response time of 0.25s (grounded) and 0.5s (ungrounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type K thermocouple offers an operating temperature range of -184°C up to +260°C (continuous), +371°C (short term) and provides an accuracy of ±2.2°C or ±2%. The 26723 series from RDF are without pre-applied cement so you can select the adhesive or clamp for extended temperature capability. These thermocouples use a Kapton® case material.

    • Stikon® thermocouple
    • Type K (Chromel/Alumel)
    • Accuracy of ±2.2°C or ±2%
    • Temperature range of -184°C up to +260°C (continuous), +371°C (short term)
    • Operating current of 0.5mA
    • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
    • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
    • Lead wires 30AWG solid T/C wire with fiberglass insulation and overwrap, parallel lay
    • Kapton® case material

    The post RdF 26723 Series appeared first on Rhopoint Components.

    ]]>         RdF 26724 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/thermocouples/rdf-26724-series/ Mon, 23 Nov 2020 20:57:51 +0000 https://components.rhopoint.com/product/rdf-26724-series/
  • Stikon® type J thermocouple
  • Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
  • 2 wire configuration
  • Kapton® case material
  • Embeded in a paper thin laminate

    • The post RdF 26724 Series appeared first on Rhopoint Components.

    ]]>     The 26724 Stikon® type J (Iron/Constantan) thermocouple temperature sensor series from RdF are embedded in a paper thin laminate intended for surface temperature measurement applications. These thermocouples have a response time of 0.25s (grounded) and 0.5s (ungrounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type J thermocouple offers an operating temperature range of -184°C up to +260°C (continuous), +371°C (short term) and provides an accuracy of ±2.2°C or ±0.75%. The 26724 series from RDF are without pre-applied cement so you can select the adhesive or clamp for extended temperature capability. These thermocouples use a Kapton® case material.

    • Stikon® thermocouple
    • Type J (Chromel/Constantan)
    • Accuracy of ±2.2°C or ±0.75%
    • Temperature range of -184°C up to +260°C (continuous), +371°C (short term)
    • Operating current of 0.5mA
    • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
    • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
    • Lead wires 30AWG solid T/C wire with fiberglass insulation and overwrap, parallel lay
    • Kapton® case material

    The post RdF 26724 Series appeared first on Rhopoint Components.

    ]]>