Temperature Transducers and Probes - Rhopoint Components https://www.rhopointcomponents.com/product-category/sensors/temperature-sensors/temperature-transducers-and-probes/ Electronic Components, Sensors, Connectors & Enclosures Thu, 22 Feb 2024 14:08:26 +0000 en-GB hourly 1 https://www.rhopointcomponents.com/wp-content/uploads/2020/09/cropped-rc-marble-100x100.png Temperature Transducers and Probes - Rhopoint Components https://www.rhopointcomponents.com/product-category/sensors/temperature-sensors/temperature-transducers-and-probes/ 32 32 Core Sensors CS20 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/temperature-transducers-and-probes/core-sensors-cs20-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs20-series/
  • Industrial temperature transmitter
  • RTD sensor type, PT100, Class B
  • Media temperature range of -40°C up to +200°C *
  • Operating temperature range of -40°C up to +85°C
  • Total error at RT & FS of ≤±1%
  • Maximum pressure of 5,000 PSI
  • Amplified 4-20mA or 1-5V output signal

    • The post Core Sensors CS20 Series appeared first on Rhopoint Components.

    ]]>
    The CS20 industrial temperature transmitter series from Core Sensors is designed for temperature measurement applications with configurable temperature ranges from −40°C up to +200°C. The CS20 series is constructed using a 316L SS probe and thread, making it compatible with a wide range of process liquids and gases. Amplified outputs of 4mA to 20mA or 1V to 5V eliminate the need for any external amplification. Various probe lengths and electrical connectors including a DIN43650-A or M12x1 Eurofast are available, further simplifying installation.

    • Industrial temperature transmitter
    • RTD sensor type, PT100, Class B
    • Media temperature range of -40°C up to +200°C *
    • Operating temperature range of -40°C up to +85°C
    • Total error at RT ≤±1%
    • Total error at FS ≤±1%
    • Maximum pressure of 5,000 PSI
    • Amplified 4-20mA or 1-5V output signal
    • 316L SS probe and process connection
    • Choice of 1/2″ NPT male or 1/4″ NPT male process connections
    • Reverse polarity and EMI protection
    • IP65 Rated **

    * Media temperature is user selected at the time of ordering. Not all transmitters are scaled to measure –40 to +200°C.
    ** IP Rating applies when the electrical connector is attached with the appropriate ingress protection and is dependent on the electrical termination selected. Contact us for more information.

    Typical applications for the CS20 industrial pressure transducer series include:

    • Gearbox lubrication systems
    • Hydraulic oil fluid temperature
    • Gas Flow temperature
    • Water and chemical storage


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Sensor TypeRTD
    PT100, Class B
    Total Error at RT≤±1%
    Total Error at FS≤±1%
    Maximum Pressure5,000 PSI
    Operating Temperature-40°C to +85°C
    Media Temperature-40°C to +200°C
    Storage Temperature-40°C to +125°C
    EMI/RFI ProtectionYes
    IP Rating **IP65 minimum

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit for more information.

    The post Core Sensors CS20 Series appeared first on Rhopoint Components.

    ]]>