Differential Pressure Sensors / Transducers - Rhopoint Components https://www.rhopointcomponents.com/product-category/sensors/pressure-sensors/differential-pressure-sensors/ Electronic Components, Sensors, Connectors & Enclosures Thu, 22 Feb 2024 14:09:11 +0000 en-GB hourly 1 https://www.rhopointcomponents.com/wp-content/uploads/2020/09/cropped-rc-marble-100x100.png Differential Pressure Sensors / Transducers - Rhopoint Components https://www.rhopointcomponents.com/product-category/sensors/pressure-sensors/differential-pressure-sensors/ 32 32 Core Sensors CS54 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/differential-pressure-sensors/core-sensors-cs54-series/ Wed, 10 Aug 2022 07:51:27 +0000 https://components.componentsdevelopment.com/?post_type=product&p=82810
  • Non-Incendive Differential Pressure Transducer
  • Differential pressure up to 50 PSI
  • Line pressure up to 500 PSI
  • Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below)
  • Overpressure of 2X or 500 PSI (whichever is less)
  • Temperature range −40°C to +80°C
  • Media temperature of -40 to +125°C

    • The post Core Sensors CS54 Series appeared first on Rhopoint Components.

    ]]>

    The CS54 non-incendive differential pressure transducer is a high-strength sensor designed for differential pressure measurements of liquids and gases in Class I, Division 2 hazardous locations. A 316L SS oil-filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1/4″ MNPT or FNPT process connections.

    In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS54 is offered with an integral Turck® Minifast® electrical connection.

    When combined with a CSA Division 2 approved Turck® cordset and a Turck® Lokfast Guard, there is no requirement for a conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.

    • Non-Incendive Differential Pressure Transducer
    • Differential pressure up to 50 PSI
    • Line pressure up to 500 PSI **
    • Bi-directional pressure ranges available
    • Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below) *
    • Stability (1 year) of ≤±0.25% of FS
    • Pressure cycles of 4 million
    • Overpressure of 2x or 500 PSI (whichever is less), configured differential pressure ***
    • Burst pressure of 3x configured differential pressure ***
    • Temperature range −40°C to +80°C (-20 to +80°C using DIN 43650-A)
    • Media temperature of -40 to +125°C (-40 to +105°C using DIN 43650-A)
    • Electrical output options of 4-20mA, 1-5V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
    • 316L SS diaphragm / oil filled sensor element
    • 1/4” NPT or FNPT process connections

    * Accuracy includes non-linearity, hysteresis and non-repeatability
    ** Max line pressure is the highest common mode pressure that can be applied to the sensor without damage
    *** Overpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur

    Approvals for the Core CS54 series include:

    • CSA Class I, Division 2, Groups A, B, C, D T4 Approved
    • ABS (American Bureau of Shipping) Approved
    • CE

    Note: Must use an approved barrier to maintain listed certifications. See page 4 of the datasheet for entity parameters.

    Typical applications for the CS54 Non-Incendive Differential Pressure Transducer include:

    • Filtration
    • Cryogenic bulk tank level measurement
    • External fuel tank level measurement
    • Compression systems
    • Test stands


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy at 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (2 PSI & below)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles4 million
    Maximum Line Pressure **500 PSI
    Overpressure ***2x or 500 PSI (whichever is less, configured differential pressure)
    Burst Pressure ***3x configured differential pressure
    Operating Temperature-40°C to +80°C
    -20°C to +80°C for DIN 43650-A
    Media Temperature-40°C to +125°C
    -40°C to +105°C for DIN 43650-A
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to +125°C
    TC Zero≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    TC Span≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    EMI / RFI ProtectionYes
    IP Rating **IP65 minimum
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    ImageText
    danger iconCaution must be taken when installing and operating the CS50/CS51/CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions, instructions or have any other enquiries.


    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS54 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS14 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/differential-pressure-sensors/core-sensors-cs14-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs14-series/
  • Wet/wet differential pressure transducer
  • Differential pressure ranges up to 300 PSI
  • Line pressure up to 500 PSI
  • Accuracy of ≤±0.25% BFSL at 25°C
  • Stability of ≤±0.25% of FS
  • Pressure cycles of 4 million
  • Overpressure of 2x or 500 PSI

    • The post Core Sensors CS14 Series appeared first on Rhopoint Components.

    ]]>
    The CS14 wet/wet differential pressure transducer series from Core Sensors is designed for various applications including filtration and tank level monitoring. The options include differential pressure ranges of up to 300 PSI with uni-driectional and bi-directional variants, both male or female 1/4” NPT process connections, and a choice of voltage or 4-20mA loop powered output signal. The CS14 comes with a 316L SS oil filled sensor element which provides excellent stability over a wide operating temperature range of −40°C to +105°C. With a fully welded design and no internal o-rings, this allows the sensor to be used in wet/wet, wet/dry and dry/dry applications. The CS14’s robust package offers corrosion resistance against various liquids and gases all within a compact design, making it a perfect solution for differential measurement applications in confined spaces.

    • Wet/wet differential pressure transducer
    • Differential pressure ranges from 1 PSI up to 300 PSI
    • Line pressure up to 500 PSI **
    • Accuracy of ≤±0.25% BFSL at 25°C * (≤±0.5% BFSL for 2 PSI & below)
    • Stability of ≤±0.25% of FS (1 year)
    • Pressure cycles of 4 million
    • Overpressure of 2x or 500 PSI (whichever is less, configured differential pressure) ***
    • Burst pressure of 3x (configured differential pressure) ***
    • Electrical output options of 4-20mA, 1-5V, 0-5V (3 wire) or 0.5-4.5V ratiometric
    • Operating temperature range of -40°C to +105°C
    • 316L SS diaphragm / oil filled sensor element
    • Both male and female 1/4” NPT process connections

    Approvals/Certifications for the Core CS14 series include:

    • CE

    Typical applications for the CS14 wet/wet differential pressure transducer series include:

    • Filtration
    • Cryogenic bulk tank level measurement
    • Tank level monitoring


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy @ 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (≤2 PSI & below)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles4 million
    Max Line Pressure **500 PSI
    Maximum Differential Pressure300 PSI
    Overpressure ***2x or 500 PSI (whichever is less, configured differential pressure)
    Burst Pressure ***3x configured differential pressure
    Operating Temperature-40°C to +105°C
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to 125°C
    TC Zero≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    TC Span≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    EMI / RFI ProtectionYes
    IP Rating ****IP65 minimum
    Vibration10g, 20 to 5000Hz
    Shock100g, 11msec, 1/2 sine


    * Accuracy includes non-linearity, hysteresis and non-repeatability
    ** Max line pressure is the highest equal common mode pressure that can be applied to the sensor without damage.
    *** Overpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur.
    **** IP Rating applies when the electrical connector is attached with the appropriate ingress protection and is dependent on the electrical termination selected. Contact us for more information.

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    0 to 5V (3 wire)
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS14 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS84 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/differential-pressure-sensors/core-sensors-cs84-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs84-series/
  • Intrinsically safe differential pressure transducer
  • Differential pressure up to 50 PSI
  • Maximum line pressure of 500 PSI
  • Bi-directional pressure ranges
  • Accuracy of ≤±0.25% BFSL
  • Stability of ≤±0.25% of FS
  • Pressure cycles of 4 million

    • The post Core Sensors CS84 Series appeared first on Rhopoint Components.

    ]]>
    The CS84 intrinsically safe differential pressure transducer series from Core Sensors is a high-strength sensor designed for differential pressure measurements of liquids and gases in Class I, Division 1 intrinsically safe environments. The CS84 all welded stainless steel construction provides a minimum IP65 rating. Excellent stability is achieved with the 316L SS oil filled sensor element over a wide operating temperature range of -20 to +80°C (Electrical Connection “F”, DIN 43650-A) while offering corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1/4″ MNPT or FNPT process connections. A wide range of configurable options make the CS84 a versatile pressure transducer that can be designed to operate in some of the harshest conditions.

    The CS84 is the ideal solution for differential pressure measurement in hazardous applications such as filter condition monitoring, sealed tank level measurement, and flow measurement across an orifice.
    The CS84 features a fully welded design without any internal O-rings or seals, allowing for wet/wet, wet/dry, or dry/dry applications. Differential pressures are available as low as 1 PSID up to 50 PSID in both uni-directional and bi-directional. Multiple electrical connections and outputs are available

    • Intrinsically safe differential pressure transducer
    • Differential pressure up to 50 PSI
    • Maximum line pressure of 500 PSI **
    • Bi-directional pressure ranges available
    • Accuracy of ≤±0.25% BFSL (≤±0.5% BFSL 2 PSI & below) *
    • Stability of ≤±0.25% of FS (1 year)
    • Pressure cycles of 4 million
    • Overpressure of 2X or 500 PSI (whichever is less, configured differential pressure) ***
    • Burst pressure of 3x (configured differential pressure) ***
    • Maximum differential pressure
    • Temperature range −40°C to +80°C (−20°C to +80°C for Electrical Connection “F”, DIN 43650-A)
    • Media temperature range −40°C to +125°C (−40°C to +105°C for Electrical Connection “F”, DIN 43650-A)
    • Electrical output options of 4-20mA, 1-5V, 1-6V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
    • 316L SS diaphragm / oil filled sensor element
    • All welded stainless steel construction for a minimum IP65 rating ****
    • 1/4” NPT or FNPT process connections

    * Accuracy includes non-linearity, hysteresis and non-repeatability
    ** Max line pressure is the highest common mode pressure that can be applied to the sensor without damage
    *** Overpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur
    **** IP Rating applies when the electrical connector is attached with the appropriate ingress protection and is dependent on the electrical termination selected. Contact us for more information.

    Approvals for the Core CS84 series include:

    • CSA Class I, Division 1 Groups C,D T4
    • Class I, Zone 0 AEx ia IIB T4 Ga (Ex ia IIB T4 Ga)
    • ABS (American Bureau of Shipping)
    • CE

    Note: Must use an approved barrier to maintain listed certifications. See page 4 of the datasheet for entity parameters.

    Typical applications for the CS84 intrinsically safe differential pressure transducer include:

    • Filtration
    • External fuel tank level measurement
    • Compression systems


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy at 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (2 PSI & below)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles4 million
    Maximum Line Pressure **500 PSI
    Overpressure ***2x or 500 PSI (whichever is less, configured differential pressure)
    Burst Pressure ***3x configured differential pressure
    Operating Temperature-40°C to +80°C
    -20°C to +80°C for DIN 43650-A
    Media Temperature-40°C to +125°C
    -40°C to +105°C for DIN 43650-A
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to +125°C
    TC Zero≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    TC Span≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    EMI / RFI ProtectionYes
    IP Rating **IP65 minimum
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    1 to 6V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    ImageText
    danger iconCaution must be taken when installing and operating the CS80, CS81, CS82 and CS84 in known Class I, Division 1, Groups A,B,C,D hazardous locations. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions or instructions or require other details on this or any other core sensor components.


    Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS84 Series appeared first on Rhopoint Components.

    ]]>         Emerson Paine™ 210-60-090 Series https://www.rhopointcomponents.com/product/sensors/emerson-paine-210-60-090-series/ Mon, 23 Nov 2020 20:13:04 +0000 https://components.rhopoint.com/product/emerson-paine-210-60-090-series/
  • Differential pressure transducer
  • Very low thermal sensitivity shift of ±0.01% of F.S. per°C
  • Small, lightweight manifold style mounting for easy installation
  • Temperature compensated design provides highly accurate pressure measurements
  • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
  • Durable solution withstands harsh environments for long-lasting performance
  • Custom electrical connection and pressure port adaptors are available on request

    • The post Emerson Paine™ 210-60-090 Series appeared first on Rhopoint Components.

    ]]>     The Paine™ 210-60-090 differential pressure transducer series from Emerson offers measuring pressure ranges from ±500 PSID up to ±5000 PSID all in a small size. The 210-60-090 from Emerson is built with two separate sensing elements to measure the pressure at the input ports. This device has a very low thermal shift of ±0.01% of full scale per °C in the toughest environments and provides a differential output along with a uniquely small design. This transducer series is ideal for measuring differential pressure in many applications, such as actuator position feedback from servo valves to automotive and aviation testing environments.

    • Differential pressure transducer
    • Pressure ranges available from ±500 PSID up to ±5000 PSID
    • Compensated temperature −23°C to +121°C
    • Small, lightweight manifold style mounting for easy installation
    • Accuracy of P1=2mV/V ±10% and P2=P1 ±2% of P1
    • Output of mV/V
    • Operating media of any compatible with 300 series CRES, Buna-N-Rubber, 2024-T351 AL and PH CRES
    • Very low thermal sensitivity shift of ±0.01% of F.S. per °C
    • Temperature compensated design provides highly accurate pressure measurements
    • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
    • Durable solution withstands harsh environments for long-lasting performance
    • Custom electrical connection and pressure port adapters are available on request

     

    Potential applications for the Paine™ 210-60-090 series include:

    • Test stands and measurements
    • Robotic hydraulic controls
    • Industrial process systems
    • Positioning systems
    • Valve pressure control

     

    Please see below the pressure table for the Paine™ 210-60-090 series, which includes details on standard products available as well as proof and burst pressure ratings:

    Paine 210-60-090 Specifications

     

    The post Emerson Paine™ 210-60-090 Series appeared first on Rhopoint Components.

    ]]>         Emerson Paine™ 210-65-010 Series https://www.rhopointcomponents.com/product/sensors/emerson-paine-210-65-010-series/ Mon, 23 Nov 2020 20:13:04 +0000 https://components.rhopoint.com/product/emerson-paine-210-65-010-series/
  • Differential pressure transducer
  • Thermal sensitivity shift of ±0.01% of F.S. per °C
  • Small, lightweight manifold style mounting for easy installation
  • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
  • Compact design for an easy-to-use differential measurement solution
  • Durable solution withstands harsh environments for long-lasting performance
  • Custom electrical connection and pressure port adaptors are available on request

    • The post Emerson Paine™ 210-65-010 Series appeared first on Rhopoint Components.

    ]]>     The Paine™ 210-60-090 differential pressure transducer series from Emerson offers measuring pressure ranges from ±500 PSID up to ±5000 PSID. This transducer comes with two separate sensing elements to measure differential pressure at the input ports. This device is shock and vibration resistant, produces highly accurate measurements in harsh and demanding conditions. The 210-65-010 differential pressure transducer from Emerson is engineered to provide differential measurements in fire-resistant Skydrol® aviation hydraulic fluid applications.

    • Differential pressure transducer
    • Pressure ranges available from ±500 PSID up to ±5000 PSID
    • Compensated temperature −23°C to +121°C
    • Accuracy of P1 = 2.0mV/V (±10%) and P2 = P1 (±2% of P1)
    • Output of mV/V
    • Small, lightweight manifold style mounting for easy installation
    • Skydrol® aviation hydraulic fluid compatible
    • Very low Thermal sensitivity shift of ±0.01% of F.S. per °C
    • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
    • Compact design for an easy-to-use differential measurement solution
    • Durable solution withstands harsh environments for long-lasting performance
    • Custom electrical connection and pressure port adapters are available on request

     

    Potential applications for the Paine™ 210-60-090 series include:

    • Aviation and automotive test stands
    • Aerospace and aviation transportation motion simulators
    • Transportation steering control systems
    • Military weapon positioning systems
    • Actuators
    • Positioning systems

     

    Please see below the pressure table for the Paine™ 210-65-010 series, which includes details on standard products available as well as proof and burst pressure ratings:

    Paine 210-65-010 Specifications

     

    The post Emerson Paine™ 210-65-010 Series appeared first on Rhopoint Components.

    ]]>