• Face down mount thin film high frequency chip resistor
• Resistance of 50Ω, 75Ω, and 100Ω
• Rated power of 50mW
• Operating frequency of DC to 67 GHz
• Temperature range of −40°C to +125°C
• Temperature coefficient range of ±25ppm
• Chip size of 0603

The Susumu RFD0603 series of thin film high frequency chip resistors are ideal for the following applications:

• Low noise high frequency transmission and reception circuit
• High frequency termination circuit
• High frequency attenuation circuit

Susumu are specialists in thin-film resistor technology, with a commitment to continued development making it is possible to realise the idea of the customer. Please visit www.susumu-usa.com/ for more information.

The post Susumu RFD Series appeared first on Rhopoint Components.

The MCTF precision thin film resistor series from Alpha Electronics offers a wide resistance range from 200kΩ up to 10MΩ with tight tolerances from ±0.01% up to ±0.1%, all in a small through-hole package with a pin pitch of 3.81 ±0.25mm.

Alpha’s Bulk Metal® foil resistor technology means that these transfer moulded, through-hole, ultra-precision resistors are ideal for precision measurements. These resistors are constructed using an outer coating of transfer moulded epoxy resin, making the parts strongly resistant to heat, moisture and solvents. Internally, there are secondary leads which act as a buffer so that stress on the exterior leads is not transmitted to the foil, providing stability against vibrations when the resistor is mounted on a circuit.

• Precision thin film resistor (transfer moulded)
• Resistance ranges from 200kΩ up to 10MΩ
• Tolerances from ±0.01% up to ±0.01% (resistance value dependent)
• TCR from ±1ppm/°C up to ±10ppm/°C (resistance value dependent)
• Maximum working voltage of 300V
• Power rating of 0.2W (at +125°C)
• Maximum rated operating temperature +125°C
• Working temperature range from -65°C up to +175°C
• Pin pitch of 5.08±0.25mm
• Lead length of 10±3mm
• Transfer moulded through-hole package
• Inorganic element coating for moisture resistance

Typical applications for the MCTF precision thin film resistor series include:

• Current sense / Voltage divider for precision instrumentation
• Automated test equipment
• Medical
• Electric Scales

Alpha Electronics are a manufacturer of some of the most stable and precise resistors on the market. As part of the VPG group, the Alpha Electronics brand is globally rewarded for the accuracy and reliability of its Bulk Metal® Foil technology resistors. Alpha Electronics has been living the conviction globally known to engineers for consistently delivering the highly desirable characteristics of “Stability, Accuracy and Reliability”. Please visit https://www.alpha-elec.co.jp for more information.

The post Alpha MCTF Series appeared first on Rhopoint Components.

The MATF precision thin film resistor series from Alpha Electronics offers a wide resistance range from 200kΩ up to 10MΩ with tight tolerances from ±0.01% up to ±0.1%, all in a small through-hole package with a pin pitch of 3.81 ±0.25mm.

Alpha’s Bulk Metal® foil resistor technology means that these transfer moulded, through-hole, ultra-precision resistors are ideal for precision measurements. These resistors are constructed using an outer coating of transfer moulded epoxy resin, making the parts strongly resistant to heat, moisture and solvents. Internally, there are secondary leads which act as a buffer so that stress on the exterior leads is not transmitted to the foil, providing stability against vibrations when the resistor is mounted on a circuit.

• Precision thin film resistor (transfer moulded)
• Resistance ranges from 200kΩ up to 10MΩ
• Tolerances from ±0.01% up to ±0.01% (resistance value dependent)
• TCR from ±1ppm/°C up to ±10ppm/°C (resistance value dependent)
• Maximum working voltage of 300V
• Power rating of 0.2W (at +125°C)
• Maximum rated operating temperature +125°C
• Working temperature range from -65°C up to +175°C
• Pin pitch of 3.81±0.25mm
• Lead length of 25±10mm
• Transfer moulded through-hole package
• Inorganic element coating for moisture resistance

Typical applications for the MATF precision thin film resistor series include:

• Current sense / Voltage divider for precision instrumentation
• Automated test equipment
• Medical
• Electric Scales

Alpha Electronics are a manufacturer of some of the most stable and precise resistors on the market. As part of the VPG group, the Alpha Electronics brand is globally rewarded for the accuracy and reliability of its Bulk Metal® Foil technology resistors. Alpha Electronics has been living the conviction globally known to engineers for consistently delivering the highly desirable characteristics of “Stability, Accuracy and Reliability”. Please visit https://www.alpha-elec.co.jp for more information.

The post Alpha MATF Series appeared first on Rhopoint Components.

• Wirewound radial leaded precision resistor
• Available in any resistance between 10Ω and 200kΩ including custom values
• Small radial leaded through-hole package
• Wire gauge of 22AWG (0.6mm)
• Excellent stability of ±35ppm/yr
• Noise levels so small they are immeasurable
• Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
• TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
• Maximum working voltage of 150V
• Power rating of 0.3W (±0.1%) and ≈0.18W (±0.01%) at +85°C
• Maximum rated operating temperature +85°C
• Temperature range from -55°C up to +160°C

The GG102 Squaristor radial wirewound resistor series offers ultra-precision in a small compact radial leaded through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value between 10Ω and 200kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts (30 pc minimum order quantity for standard parts, where they are not stocked).

The General Resistance ultra-precision wirewound resistor series has been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

The post General Resistance GG102 Squaristor Series appeared first on Rhopoint Components.

• Wirewound axial leaded precision resistor
• Available in any resistance between 10Ω and 200kΩ
• Stocked in many standard resistance values here at Rhopoint Components
• Small axial leaded through-hole package
• Excellent stability of ±50ppm/yr
• Noise levels so small they are immeasurable
• Wire gauge of 24AWG (0.4mm)
• Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
• TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
• Maximum working voltage of 175V
• Power rating of 0.2W (±0.1%) and 0.125W (±0.01%) at +85°C
• Maximum rated operating temperature +85°C
• Temperature range from -55°C up to +160°C

The 5E10 Mini-Ohm axial wirewound precision resistor series offers ultra-precision in a small compact through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value between 10Ω and 200kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts (30 pc minimum order quantity for standard parts, where they are not stocked).

The General Resistance ultra-precision wirewound axial leaded resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

The post General Resistance 5E10 Mini-Ohm Series appeared first on Rhopoint Components.

• Wirewound axial leaded precision resistor
• Available in any resistance between 1Ω and 699kΩ including custom values
• Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
• Wire gauge of 20AWG (0.6mm)
• Excellent stability of ±35ppm/yr
• Noise levels so small they are immeasurable
• Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
• TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
• Maximum working voltage of 200V
• Power rating of 0.33W (±0.1%) and ≈0.2W (±0.01%) at +85°C
• Maximum rated operating temperature +85°C
• Temperature range from -55°C up to +160°C

The 8E16 Econistor axial wirewound precision resistor series is the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

Any custom resistance value between 1Ω and 699kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts, including additional RTD simulation values that are not standard stocked items (30 pc minimum order quantity for standard parts, where they are not stocked).

The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

The post General Resistance 8E16 Econistor Series appeared first on Rhopoint Components.

• Wirewound axial leaded precision resistor
• Available in any resistance between 1Ω and 699kΩ including custom values
• Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
• Wire gauge of 20AWG (0.6mm)
• Excellent stability of ±35ppm/yr
• Noise levels so small they are immeasurable
• Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
• TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
• Maximum working voltage of 200V
• Power rating of 0.33W (±0.1%) and ≈0.2W (±0.01%) at +85°C
• Maximum rated operating temperature +85°C
• Temperature range from -55°C up to +160°C

The 8G16 Econistor axial wirewound precision resistor series is the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

Any custom resistance value between 1Ω and 699kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts, including additional RTD simulation values that are not standard stocked items (30 pc minimum order quantity for standard parts, where they are not stocked).

The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

The post General Resistance 8G16 Econistor Series appeared first on Rhopoint Components.

• Wirewound, precision, axial through-hole resistor
• Available in resistance values between 700kΩ and 3.8MΩ (lower resistances available upon request)
• Minimum tolerance ±0.005%
• Standard TCR of ±10 ppm/°C (wide TCR range of -20 ppm/°C to +6000 ppm/°C available upon request)
• Standard long term stability of 100 ppm/year, with high stability version (±20 ppm/year) available upon request
• Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
• 100% acceptance tested / traceable to NIST
• Power rating of 0.4W
• Maximum working voltage 300V
• Matched resistance sets to ±0.001% and ±0.5ppm/°C available
• Temperature range -55°C to +145°C

Please see below for the power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon 100 series wirewound resistor range, including the 120 series:

The post Riedon 120 Series appeared first on Rhopoint Components.

• Wirewound, precision, axial through-hole resistor
• Available in resistance values between 700kΩ and 3.8MΩ (lower resistances available upon request)
• Minimum tolerance ±0.005%
• Standard TCR of ±10 ppm/°C (wide TCR range of -20 ppm/°C to +6000 ppm/°C available upon request)
• Standard long term stability of 100 ppm/year, with high stability version (±20 ppm/year) available upon request
• Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
• 100% acceptance tested / traceable to NIST
• Power rating of 0.5W
• Maximum working voltage 400V
• Matched resistance sets to ±0.001% and ±0.5ppm/°C available
• Temperature range -55°C to +145°C

Please see below for the power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon 100/SM/PC wirewound resistor range, including the 121 series:

The post Riedon 121 Series appeared first on Rhopoint Components.

• Wirewound, precision, axial through-hole resistor
• Available in resistance values between 700kΩ and 6MΩ (lower resistances available upon request)
• Minimum tolerance ±0.005%
• Standard TCR of ±10 ppm/°C (wide TCR range of -20 ppm/°C to +6000 ppm/°C available upon request)
• Standard long term stability of 100 ppm/year, with high stability version (±20 ppm/year) available upon request
• Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
• 100% acceptance tested / traceable to NIST
• Power rating of 0.75W
• Maximum working voltage 600V
• Matched resistance sets to ±0.001% and ±0.5 ppm/°C available
• Temperature range -55°C to +145°C

Please see below the Power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon 100 series wirewound resistor range, including the 129 series:

The post Riedon 129 Series appeared first on Rhopoint Components.