Load Banks - Rhopoint Components https://www.rhopointcomponents.com/product-category/components/resistors/load-banks/ Electronic Components, Sensors, Connectors & Enclosures Mon, 25 Nov 2024 16:05:14 +0000 en-GB hourly 1 https://www.rhopointcomponents.com/wp-content/uploads/2020/09/cropped-rc-marble-100x100.png Load Banks - Rhopoint Components https://www.rhopointcomponents.com/product-category/components/resistors/load-banks/ 32 32 RARA RH50 (Inductive) https://www.rhopointcomponents.com/product/components/resistors/load-banks/rara-rh50-inductive/ Thu, 23 Nov 2023 10:26:10 +0000 https://www.rhopointcomponents.com/?post_type=product&p=104400
  • Metal clad wire wound resistor
  • Resistance range between 0.68Ω and 50kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

    • The post RARA RH50 (Inductive) appeared first on Rhopoint Components.

    ]]>     The post RARA RH50 (Inductive) appeared first on Rhopoint Components.

    ]]>         RARA RH50 (Non-Inductive) https://www.rhopointcomponents.com/product/components/resistors/load-banks/rara-rh50-non-inductive/ Wed, 22 Nov 2023 15:35:54 +0000 https://www.rhopointcomponents.com/?post_type=product&p=104330
  • Metal clad wire wound resistor
  • Resistance range between 0.2Ω and 20kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

    • The post RARA RH50 (Non-Inductive) appeared first on Rhopoint Components.

    ]]>     The post RARA RH50 (Non-Inductive) appeared first on Rhopoint Components.

    ]]>         RARA RH25 (Inductive) https://www.rhopointcomponents.com/product/components/resistors/load-banks/rara-rh25-inductive/ Wed, 22 Nov 2023 14:50:51 +0000 https://www.rhopointcomponents.com/?post_type=product&p=104267
  • Inductive Metal clad wire wound resistor
  • Resistance range between 0.27Ω and 25kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

    • The post RARA RH25 (Inductive) appeared first on Rhopoint Components.

    ]]>     The post RARA RH25 (Inductive) appeared first on Rhopoint Components.

    ]]>         RARA RH25 (Non-Inductive) https://www.rhopointcomponents.com/product/components/resistors/load-banks/rara-rh25-non-inductive/ Wed, 22 Nov 2023 09:10:37 +0000 https://www.rhopointcomponents.com/?post_type=product&p=104220
  • Non-Inductive Metal clad wire wound resistor
  • Resistance range between 0.1Ω and 10kΩ
  • Insulation resistance of 20MΩ minimum
  • Temperature range of -55°C up to +250°C
  • Cement moulding within aluminium housing
  • Short time overload of 5 x power rating is 5 seconds
  • Mounts on chassis to utilise heat sink effect

    • The post RARA RH25 (Non-Inductive) appeared first on Rhopoint Components.

    ]]>     The post RARA RH25 (Non-Inductive) appeared first on Rhopoint Components.

    ]]>         RARA IRB120 https://www.rhopointcomponents.com/product/components/resistors/load-banks/rara-irb120/ Mon, 23 Nov 2020 20:40:21 +0000 https://components.rhopoint.com/product/rara-irb120-series/
  • Metal clad wire wound economy resistor
  • Inductive resistance between 0.1Ω and 1.3kΩ
  • Non-inductive resistance between 0.1Ω and 300Ω
  • Power rating of 120W
  • Insulation resistance of 20MΩ minimum
  • Short time overload of 10 x power rating is 5 seconds

    • The post RARA IRB120 appeared first on Rhopoint Components.

    ]]>     The IRB120 metal clad wire wound economy resistor series from RARA offers a power rating of up to 120W with available resistance values between 0.1Ω and 1.3kΩ (inductive design) or between 0.1Ω and 300Ω (non-inductive design). These high power resistors are available with tolerances of ±2.0%, ±3.0%, ±5.0% and ±10.0% other options available including inductive or non-inductive resistive windings. The IRB120 series from RARA come in a durable metal case with flying leads and offers a temperature range from -55°C up to +200°C

    • Metal clad wire wound economy resistor
    • Inductive resistance range available between 0.1Ω and 1.3kΩ
    • Non-inductive resistance range available between 0.1Ω and 300Ω
    • Flying lead terminals
    • TCR of +260 ppm/°C maximum
    • Tolerance values available of ±2.0%, ±3.0%, ±5.0% and ±10.0%
    • Power rating of 120W
    • Insulation resistance of 20MΩ minimum
    • Temperature range between -55°C and +200°C
    • Short time overload of 10 x power rating for 5 seconds
     

     

    The post RARA IRB120 appeared first on Rhopoint Components.

    ]]>         RARA IRB80 https://www.rhopointcomponents.com/product/components/resistors/load-banks/rara-irb80/ Mon, 23 Nov 2020 20:40:21 +0000 https://components.rhopoint.com/product/rara-irb80-series/
  • Metal clad wire wound economy resistor
  • Inductive resistance between 0.1Ω and 910Ω
  • Non-inductive resistance between 0.1Ω and 110Ω
  • Power rating of 80W
  • Insulation resistance of 20MΩ minimum
  • Short time overload of 10 x power rating is 5 seconds

    • The post RARA IRB80 appeared first on Rhopoint Components.

    ]]>     The IRB80 metal-clad wire-wound economy resistor series from RARA offers a power rating of up to 80W with available resistance values between 0.1Ω and 910Ω (inductive design) or between 0.1Ω and 110Ω (non-inductive design). These high power resistors are available with tolerances of ±2.0%, ±3.0%, ±5.0% and ±10.0% other options available including inductive or non-inductive resistive windings. The IRB80 series from RARA comes in a durable metal case with flying leads and offers a temperature range from -55°C up to +200°C

    • Metal clad wire wound economy resistor
    • Inductive resistance range available between 0.1Ω and 910Ω
    • Non-inductive resistance range available between 0.1Ω and 110Ω
    • Flying lead terminals
    • TCR of +260 ppm/°C maximum
    • Tolerance values available of ±2.0%, ±3.0%, ±5.0% and ±10.0%
    • Power rating of 80W
    • Insulation resistance of 20MΩ minimum
    • Temperature range between -55°C and +200°C
    • Short time overload of 10 x power rating for 5 seconds
     

     

    The post RARA IRB80 appeared first on Rhopoint Components.

    ]]>         RARA IRF400 https://www.rhopointcomponents.com/product/components/resistors/load-banks/rara-irf400-series/ Mon, 23 Nov 2020 20:39:06 +0000 https://components.rhopoint.com/product/rara-irf400-series/
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 4.45kΩ
  • Power rating of 400W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

    • The post RARA IRF400 appeared first on Rhopoint Components.

    ]]>     The IRF400 flat type metal clad wire wound resistor series from RARA, offers a power rating of up to 400W on a heat sink and available resistance values between 1Ω and 4.45kΩ. These high power and low inductance resistors are designed for industrial and other applications where space is at a premium, the flat design also allows for excellent heat dissipation. The IRF400 series from RARA offers an extruded aluminium housing which provides strong and rugged protection, with options of cement or silicone filling materials as well as tolerances as low as ±0.5%. This resistor series offers a temperature range from -55°C up to +200°C (cement filling material).

    • Flat space saving metal clad wire wound resistor
    • Cement (standard) or silicone filling material with an extruded aluminium housing
    • 300mm flying leads
    • Resistance ranges available between 1Ω and 4.45kΩ
    • TCR of +260 ppm/°C maximum
    • Tolerance values available of ±0.5%, ±1.0%, ±2.0%, ±5.0% and ±10.0%
    • Power rating of 400W (on a heat sink)
    • Insulation resistance of 20MΩ minimum
    • Temperature range between -55°C and +200°C (cement) or -55°C and +150°C (silicone)
    • Short time overload of 5 x power rating for 5 seconds

    Typical applications for the IRF series include:

    • Motor drives
    • Braking and snubbing applications
    • Power sources for industrial equipment

    The post RARA IRF400 appeared first on Rhopoint Components.

    ]]>         RARA IRF150 https://www.rhopointcomponents.com/product/components/resistors/load-banks/rara-irf150-series/ Mon, 23 Nov 2020 20:39:06 +0000 https://components.rhopoint.com/product/rara-irf150-series/
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.75kΩ
  • Power rating of 150W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

    • The post RARA IRF150 appeared first on Rhopoint Components.

    ]]>     The IRF150 flat type metal clad wire wound resistor series from RARA, offers a power rating of up to 150W on a heat sink and available resistance values between 1Ω and 1.75kΩ. These high power and low inductance resistors are designed for industrial and other applications where space is at a premium, the flat design also allows for excellent heat dissipation. The IRF150 series from RARA offers an extruded aluminium housing which provides strong and rugged protection, with options of cement or silicone filling materials as well as tolerances as low as ±0.5%. This resistor series offers a temperature range from -55°C up to +200°C (cement filling material).

    • Flat space saving metal clad wire wound resistor
    • Cement (standard) or silicone filling material with an extruded aluminium housing
    • 300mm flying leads
    • Resistance ranges available between 1Ω and 1.75kΩ
    • TCR of +260 ppm/°C maximum
    • Tolerance values available of ±0.5%, ±1.0%, ±2.0%, ±5.0% and ±10.0%
    • Power rating of 150W (on a heat sink)
    • Insulation resistance of 20MΩ minimum
    • Temperature range between -55°C and +200°C (cement) or -55°C and +150°C (silicone)
    • Short time overload of 5 x power rating for 5 seconds

    Typical applications for the IRF series include:

    • Motor drives
    • Braking and snubbing applications
    • Power sources for industrial equipment

    The post RARA IRF150 appeared first on Rhopoint Components.

    ]]>         RARA ULF150C https://www.rhopointcomponents.com/product/components/resistors/load-banks/rara-ulf150c-series/ Mon, 23 Nov 2020 20:39:06 +0000 https://components.rhopoint.com/product/rara-ulf150c-series/
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 1.75kΩ
  • Power rating of 150W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For Non UL Approval see the IRF Series

    • The post RARA ULF150C appeared first on Rhopoint Components.

    ]]>     The ULF150C flat type metal clad wire wound resistor series from RARA, offers a power rating of up to 150W on a heat sink and available resistance values between 1Ω and 1.75kΩ. These UL approved high power and low inductance resistors are designed for industrial and other applications where space is at a premium, the flat design also allows for excellent heat dissipation. The ULF150C series from RARA offers an extruded aluminium housing providing strong and rugged protection, with cement filling material as well as tolerances as low as ±0.5%. This resistor series offers a temperature range from -55°C up to +200°C.

    • Flat space saving metal clad wire wound resistor
    • Cement filling material with an extruded aluminium housing
    • 300mm Flying leads
    • UL approved
    • Resistance ranges available between 1Ω and 1.75kΩ
    • TCR of +260 ppm/°C maximum
    • Tolerance values available of ±0.5%, ±1.0%, ±2.0%, ±5.0% and ±10.0%
    • Power rating of 150W (on a heat sink)
    • Insulation resistance of 20MΩ minimum
    • Temperature range between -55°C and +200°C
    • Short time overload of 5 x power rating for 5 seconds

    Typical applications for the ULN series include:

    • Motor drives
    • Braking and snubbing applications
    • Power sources for industrial equipment

    The post RARA ULF150C appeared first on Rhopoint Components.

    ]]>         RARA IRF200 https://www.rhopointcomponents.com/product/components/resistors/load-banks/rara-irf200-series/ Mon, 23 Nov 2020 20:39:06 +0000 https://components.rhopoint.com/product/rara-irf200-series/
  • Flat type metal clad wire wound resistor
  • Resistance options from 1Ω up to 2.2kΩ
  • Power rating of 200W (on a heat sink)
  • Tolerance options between ±0.5% and ±10.0%
  • TCR of +260 ppm/°C maximum
  • For UL Approval see the ULF Series

    • The post RARA IRF200 appeared first on Rhopoint Components.

    ]]>     The IRF200 flat type metal clad wire wound resistor series from RARA, offers a power rating of up to 200W on a heat sink and available resistance values between 1Ω and 2.2kΩ. These high power and low inductance resistors are designed for industrial and other applications where space is at a premium, the flat design also allows for excellent heat dissipation. The IRF200 series from RARA offers an extruded aluminium housing which provides strong and rugged protection, with options of cement or silicone filling materials as well as tolerances as low as ±0.5%. This resistor series offers a temperature range from -55°C up to +200°C (cement filling material).

    • Flat space saving metal clad wire wound resistor
    • Cement (standard) or silicone filling material with an extruded aluminium housing
    • 300mm flying leads
    • Resistance ranges available between 1Ω and 2.2kΩ
    • TCR of +260 ppm/°C maximum
    • Tolerance values available of ±0.5%, ±1.0%, ±2.0%, ±5.0% and ±10.0%
    • Power rating of 200W (on a heat sink)
    • Insulation resistance of 20MΩ minimum
    • Temperature range between -55°C and +200°C (cement) or -55°C and +150°C (silicone)
    • Short time overload of 5 x power rating for 5 seconds

    Typical applications for the IRF series include:

    • Motor drives
    • Braking and snubbing applications
    • Power sources for industrial equipment

    The post RARA IRF200 appeared first on Rhopoint Components.

    ]]>