Reed Relays & Switches - Rhopoint Components https://www.rhopointcomponents.com/product-category/components/relays-switches/ Electronic Components, Sensors, Connectors & Enclosures Wed, 20 Nov 2024 15:07:22 +0000 en-GB hourly 1 https://www.rhopointcomponents.com/wp-content/uploads/2020/09/cropped-rc-marble-100x100.png Reed Relays & Switches - Rhopoint Components https://www.rhopointcomponents.com/product-category/components/relays-switches/ 32 32 ISOCOM CSMRLVGXXT8 https://www.rhopointcomponents.com/product/components/relays-switches/solid-state-relays/isocom-csmrlvgxxt8/ Wed, 06 Nov 2024 16:34:32 +0000 https://www.rhopointcomponents.com/?post_type=product&p=109438
  • Latching solid state relay for military and space use
  • Available in SPST, SPDT, DPST, DPDT configurations
  • Output currents up to 3A
  • Military temperature range -55°C to +125°C
  • Microcontroller compatible, low on-state resistance

    • The post ISOCOM CSMRLVGXXT8 appeared first on Rhopoint Components.

    ]]>     ISOCOM Latching Solid State Relays are designed to replace existing electro-mechanical relays (EMR). The CSMRLVGXXT8 is available in the single pole single throw (SPST), single pole double throw (SPDT), double pole single throw (DPST) and double pole double throw (DPDT) configuration. They are resilient to damage from shock and immune to contact-related problems (arcing, contamination) that are associated with mechanical equivalents. They are also lightweight in comparison to the EMR. Coupling between the input, output and power bus stages offers an effective isolation up to 500V. The latch and reset input stages are designed to directly interface with standard microcontrollers (µC), requiring low current (< 10mA) with 3.3V or 5V logic. This device offers various operating voltage ranges from 10 to 50V with current capabilities up to 3A. Furthermore, it is featured in a 12 Pin TO-8 Package where each pin is isolated with a glass seal. This hermetic ceramic package comes with a gold plate finish and solder dip options available.

    Key features of the ISOCOM CSMRLVGXXT8 include:

    • Low on-state resistance
    • Selection of Operating Current and Voltage
    • SPST, SPDT, DPST, DPDT
    • Full Military temperature range -55°C to +125°C
    • Military and Space Screening
    • Compatible with µC Drive
    • Internally Isolated
    • Output Currents up to 3A

    Typical applications for the ISOCOM CSMRLVGXXT8 include:

    • Designed for 10 to 50VDC Bus Application
    • Space Systems/Satellites
    • Space Battery Management Systems
    • Bus Control
    • Aerospace Power Distribution
    • Power Isolation and Control

     

    ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

    The post ISOCOM CSMRLVGXXT8 appeared first on Rhopoint Components.

    ]]>         ISOCOM CSMR40 https://www.rhopointcomponents.com/product/components/relays-switches/solid-state-relays/isocom-csmr40/ Wed, 06 Nov 2024 16:34:32 +0000 https://www.rhopointcomponents.com/?post_type=product&p=109423
  • Single-channel solid state relay for space applications
  • Hermetically sealed 8-pin DIP package
  • Low input requirements
  • Withstands up to 1,000V DC isolation
  • Radiation tested to 150 Krad(Si)

    • The post ISOCOM CSMR40 appeared first on Rhopoint Components.

    ]]>     This CSMR40/41 is a single channel optically coupled solid state relay. It consists of an LED optically coupled to a photovoltaic diode which drives two discrete power MOSFETs. The CSMR40/41 is being used in environments encountered by space applications. It is manufactured to JANS standards in conjunction with MIL-PRF-19500 procedures. Package styles for this device include 8-Pin DIP package, with solder dip options available. Absolute maximum ratings, recommended operating conditions, electrical specifications and performance characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted.

    Key features of the ISOCOM CSMR40 include:

    • Released to European Standard and Complies with MIL-STD
    • Total Ionizing Dose Tested to 150 Krad(Si)
    • Withstand Test Voltage 1,000 VDC
    • 8-Pin DIP
    • Hermetically Sealed
    • Low Input Requirements
    • High Current Ratio

    Typical applications for the ISOCOM CSMR40 include:

    • Space Equipment and Systems
    • Military and High-Reliability Equipment and Systems
    • Medical Instruments
    • MOS / CMOS Applications
    • Logic Interfacing
    • Power Supplies

     

    ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

    The post ISOCOM CSMR40 appeared first on Rhopoint Components.

    ]]>         ISOCOM CSMR140 https://www.rhopointcomponents.com/product/components/relays-switches/solid-state-relays/isocom-csmr140/ Wed, 06 Nov 2024 16:34:32 +0000 https://www.rhopointcomponents.com/?post_type=product&p=109424
  • Single-channel solid state relay for space applications
  • Hermetically sealed LCC-4 surface mount package
  • Continuous output current from 0.8A to 3A
  • Withstands up to 1,000V DC isolation
  • High transient immunity and optically coupled input/output

    • The post ISOCOM CSMR140 appeared first on Rhopoint Components.

    ]]>     The CSMR140 is a power MOSFET optocoupler housed in a 4 Pin LCC package, designed for applications where independent switches with radiation-tolerant performance are necessary. With 1000 VDC isolation between input/output isolated relay, the CSMR140 is well-suited for solid-state relay applications. Its performance is rated for the full military temperature range, making it ideal for demanding environments.

    Functionally, the CSMR140 acts as (Single Pole Single Throw), normally open (2 Form A) solid-state relay. The relay is activated by an input current, typically driven by a standard TTL device. The input current biases an AlGaAs emitter that is optically coupled to an integrated diode array, which in turn powers control circuitry to operate the output power MOSFET.
    The device is available with screening in accordance with MIL-PRF-38534, Class K/H, or custom screening options or as COTS. The lead options support both through-hole and surface-mount assemblies, with gold-plated leads being standard, though other lead finishes are available.

    Key features of the ISOCOM CSMR140 include:

    • Compact Isolation Solid State Switches
    • Continuous Output Current of 0.8A
    • 3A Output Surge
    • High Level of Transient Immunity
    • Optically Coupled between Input and Output
    • Space/Military Screening available
    • Full Military temperature range -55°C to +125°C

    Typical applications for the ISOCOM CSMR140 include:

    • Space equipment and systems
    • Military equipment and hi-reliability systems
    • Aircraft Controls
    • Electromechanical and Solid State Relay Replacement
    • Computer Systems
    • Motor Driver
    • H Bridge Driver

     

    ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

    The post ISOCOM CSMR140 appeared first on Rhopoint Components.

    ]]>         ISOCOM CSMR240 https://www.rhopointcomponents.com/product/components/relays-switches/solid-state-relays/isocom-csmr240/ Wed, 06 Nov 2024 16:34:32 +0000 https://www.rhopointcomponents.com/?post_type=product&p=109425
  • Compact solid-state switch for space applications
  • Hermetically sealed 4-pin LCC package
  • Continuous output current of 0.3A
  • High transient immunity with optically coupled input/output
  • Military temperature range -55°C to +125°C

    • The post ISOCOM CSMR240 appeared first on Rhopoint Components.

    ]]>     The CSMR240 is a power MOSFET optocoupler housed in a 4 Pin LCC package, designed for applications where independent switches with radiation-tolerant performance are necessary. With 1000 VDC isolation between input/output isolated relay, the CSMR240 is well-suited for solid-state relay applications. Its performance is rated for the full military temperature range, making it ideal for demanding environments.

    Functionally, the CSMR240 acts as (Single Pole Single Throw), normally open (2 Form A) solid-state relay. The relay is activated by an input current, typically driven by a standard TTL device. The input current biases an AlGaAs emitter that is optically coupled to an integrated diode array, which in turn powers control circuitry to operate the output power MOSFET.
    The device is available with screening in accordance with MIL-PRF-38534, Class K/H, or custom screening options or as COTS. The lead options support both through-hole and surface-mount assemblies, with gold-plated leads being standard, though other lead finishes are available.

    Key features of the ISOCOM CSMR240 include:

    • Compact Isolation Solid State Switches
    • Continuous Output Current of 0.3A
    • 0.4A Output Surge
    • High Level of Transient Immunity
    • Optically Coupled between Input and Output
    • Space/Military Screening available
    • Full Military temperature range -55°C to +125°C

    Typical applications for the ISOCOM CSMR240 include:

    • Space equipment and systems
    • Military equipment and hi-reliability systems
    • Aircraft Controls
    • Electromechanical and Solid-State Relay Replacement
    • Computer Systems
    • Motor Driver
    • H Bridge Driver

     

    ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

    The post ISOCOM CSMR240 appeared first on Rhopoint Components.

    ]]>         ISOCOM CSMR540 https://www.rhopointcomponents.com/product/components/relays-switches/solid-state-relays/isocom-csmr540/ Wed, 06 Nov 2024 16:34:32 +0000 https://www.rhopointcomponents.com/?post_type=product&p=109426
  • Single-channel solid state relay for space applications
  • Hermetically sealed 8-pin DIP package
  • Output withstand voltage up to 400V
  • Low input requirements and high current ratio
  • Withstands up to 1,500V DC isolation

    • The post ISOCOM CSMR540 appeared first on Rhopoint Components.

    ]]>     The CSMR540 is a power MOSFET optocoupler housed in an 8-pin dual-in-line hermetic ceramic package, designed for applications where independent switches with radiation-tolerant performance are necessary. With 1500 VDC isolation between input/output isolated relays, the CSMR540 is well-suited for solid-state relay applications. Its performance is rated for the full military temperature range, making it ideal for demanding environments.
    Functionally, the CSMR540 acts as (Single Pole Single Throw), normally open (2 Form A) solid-state relay. Each relay is activated by an input current, typically driven by a standard TTL device. The input current biases an AlGaAs emitter that is optically coupled to an integrated diode array, which in turn powers control circuitry to operate the output power MOSFET.
    The device is available with screening in accordance with MIL-PRF-38534, Class K/H, or custom screening options or as COTS. The lead options support both through-hole and surface-mount assemblies, with gold-plated leads being standard, though other lead finishes are available.

    Key features of the ISOCOM CSMR540 include:

    • Complies to MIL-STD
    • High Voltage Isolation 1500 VDC
    • Output Withstand Voltage 400 V
    • 8-pin DIP package
    • Low Input Requirements
    • High Current Ratio

    Typical applications for the ISOCOM CSMR540 include:

    • Space systems & radiation equipment
    • Military/High Reliability Systems
    • Medical Instruments
    • MOS/CMOS Applications
    • Logic Interfacing
    • Power Supply

     

    ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

    The post ISOCOM CSMR540 appeared first on Rhopoint Components.

    ]]>         ISOCOM CDMR1006 https://www.rhopointcomponents.com/product/components/relays-switches/solid-state-relays/isocom-cdmr1006/ Wed, 06 Nov 2024 16:34:32 +0000 https://www.rhopointcomponents.com/?post_type=product&p=109427
  • Dual-channel solid state relay for high-reliability applications
  • Hermetically sealed 8-lead surface mount package
  • 6A continuous current with buffered input stage
  • High isolation up to 1,000V DC
  • Optically coupled with independent SPST relays

    • The post ISOCOM CDMR1006 appeared first on Rhopoint Components.

    ]]>     The CDMR1006 has two power MOSFET optocouplers packaged into an 8-Lead Surface Mount package, and is suited for applications where two independent switches are required. This popular hermetic ceramic package combined with 1,000Vdc isolation between input and output, and between two isolated relays, makes this device ideal for solid state relay applications.

    The CDMR1006 is available over the full military temperature range and with quality and screening levels ranging from Commercial and Industrial, to Defence and Space. Gold plated leads are standard, but the other lead finishes per Mil-PRF-38534 are also available. Functionally, the CDMR1006 operates as dual, single-pole-single-throw (SPST) normally open relay. Each relay is actuated by a standard logic input.

    Key features of the ISOCOM CDMR1006 include:

    • Released to European Standard and complies to MIL-STD
    • 6A Continuous Current
    • Buffered Input Stage
    • 8 Lead Surface Mount Package
    • High Isolation up to 1,000Vdc
    • Optically Coupled
    • Hermetically Sealed

    Typical applications for the ISOCOM CDMR1006 include:

    • Space Equipment and Systems
    • Military and High Reliability Systems
    • Medical Instruments
    • MOS/CMOS Applications
    • Logic Interfacing
    • Power Supply

     

    ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

    The post ISOCOM CDMR1006 appeared first on Rhopoint Components.

    ]]>         ISOCOM CDMR1010 https://www.rhopointcomponents.com/product/components/relays-switches/solid-state-relays/isocom-cdmr1010/ Wed, 06 Nov 2024 16:34:32 +0000 https://www.rhopointcomponents.com/?post_type=product&p=109428
  • Dual-channel solid state relay with 10A continuous current
  • Hermetically sealed 8-lead surface mount package
  • Buffered input stage for enhanced reliability
  • High isolation up to 1,000V DC
  • Optically coupled with independent SPST relays

    • The post ISOCOM CDMR1010 appeared first on Rhopoint Components.

    ]]>     The CDMR1010 has two power MOSFET optocouplers packaged into an 8-Lead Surface Mount package and is suited for applications where two independent switches are required. This popular hermetic ceramic package combined with 1,000Vdc isolation between input and output, and between two isolated relays, makes this device ideal for solid state relay applications.

    The CDMR1010 is available over the full military temperature range and with quality and screening levels ranging from Commercial and Industrial, to Defence and Space. Gold plated leads are standard, but the other lead finishes per Mil-PRF-38534 are also available. Functionally, the CDMR1010 operates as dual, single-pole-single-throw (SPST) normally open relay. Each relay is actuated by a standard logic input.

    Key features of the ISOCOM CDMR1010 include:

    • 10A Continuous Current
    • Buffered Input Stage
    • 8 Lead Surface Mount Package
    • High Isolation up to 1,000Vdc
    • Optically Coupled
    • Hermetically Sealed

    Typical applications for the ISOCOM CDMR1010 include:

    • Space Equipment and Systems
    • Military and High Reliability Systems
    • Medical Instruments
    • MOS/CMOS Applications
    • Logic Interfacing
    • Power Supply

     

    ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

    The post ISOCOM CDMR1010 appeared first on Rhopoint Components.

    ]]>         ISOCOM CDMR1020 https://www.rhopointcomponents.com/product/components/relays-switches/solid-state-relays/isocom-cdmr1020/ Wed, 06 Nov 2024 16:34:32 +0000 https://www.rhopointcomponents.com/?post_type=product&p=109429
  • Dual-channel solid state relay with 20A continuous current
  • Hermetically sealed 8-lead surface mount package
  • Buffered input stage for enhanced reliability
  • High isolation up to 1,000V DC
  • Optically coupled with independent SPST relays

    • The post ISOCOM CDMR1020 appeared first on Rhopoint Components.

    ]]>     The CDMR1020 has two power MOSFET optocouplers packaged into an 8-Lead Surface Mount package and is suited for applications where two independent switches are required. This popular hermetic ceramic package combined with 1,000Vdc isolation between input and output, and between two isolated relays, makes this device ideal for solid state relay applications.

    The CDMR1020 is available over the full military temperature range and with quality and screening levels ranging from Commercial and Industrial, to Defence and Space. Gold plated leads are standard, but the other lead finishes per Mil-PRF-38534 are also available. Functionally, the CDMR1020 operates as dual, single-pole-single-throw (SPST) normally open relay. Each relay is actuated by a standard logic input.

    Key features of the ISOCOM CDMR1020 include:

    • Released to European Standard and complies to MIL-STD
    • 20A Continuous Current
    • Buffered Input Stage
    • 8 Lead Surface Mount Package
    • High Isolation up to 1,000Vdc
    • Optically Coupled
    • Hermetically Sealed

    Typical applications for the ISOCOM CDMR1020 include:

    • Space Equipment and Systems
    • Military and High Reliability Systems
    • Logic level of 3.3V input
    • Power Supply
    • Displacement Damage & TID Capability

     

    ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

    The post ISOCOM CDMR1020 appeared first on Rhopoint Components.

    ]]>         ISOCOM CDMR2010 https://www.rhopointcomponents.com/product/components/relays-switches/solid-state-relays/isocom-cdmr2010/ Wed, 06 Nov 2024 16:34:32 +0000 https://www.rhopointcomponents.com/?post_type=product&p=109430
  • Dual-channel solid state relay with 10A continuous current
  • Hermetically sealed 8-lead surface mount package
  • Buffered input stage for enhanced performance
  • High isolation up to 1,000V DC
  • Optically coupled with independent SPST relays

    • The post ISOCOM CDMR2010 appeared first on Rhopoint Components.

    ]]>     The CDMR2010 has two power MOSFET optocouplers packaged into an 8-lead surface mount hybrid package and is suited for applications where two independent switches are required. This popular hermetic ceramic package combined with 1,000Vdc isolation between input and output, and between two isolated relays, makes this device ideal for solid state relay applications.

    The CDMR2010 is available with MIL-PRF-38534 Class K & Class H screening. Gold plated leads are standard, but the other lead finishes are also available. Functionally, the CDMR2010 operates as dual, single-pole-single-throw (SPST) normally open relay. Each relay is actuated by a standard logic input.

    Absolute maximum ratings, recommended operating conditions, electrical specifications and performance characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted.

    Key features of the ISOCOM CDMR2010 include:

    • Released to European Standard and complies to MIL-STD
    • 10A Continuous Current
    • Buffered Input Stage
    • 8 Lead Surface Mount Package
    • High Isolation up to 1,000Vdc
    • Optically Coupled
    • Hermetically Sealed
    • Radiation capability TID 200kRADS

    Typical applications for the ISOCOM CDMR2010 include:

    • Space Equipment and Systems
    • Military and High Reliability Systems
    • Logic level of 3.3V input
    • Power Supply
    • Displacement damage of 1.8E12 n/cm²

     

    ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

    The post ISOCOM CDMR2010 appeared first on Rhopoint Components.

    ]]>         ISOCOM CQMR310 https://www.rhopointcomponents.com/product/components/relays-switches/solid-state-relays/isocom-cqmr310/ Wed, 06 Nov 2024 16:34:32 +0000 https://www.rhopointcomponents.com/?post_type=product&p=109432
  • Quad-channel solid state relay with independent switches
  • Hermetically sealed 32-pin flatpack package
  • Continuous output current of 0.8A, surge up to 3A
  • Withstands up to 1,500V DC isolation
  • High transient immunity, optically coupled

    • The post ISOCOM CQMR310 appeared first on Rhopoint Components.

    ]]>     The CQMR310 has four power MOSFET optocouplers packaged into a single 32-pin Flatpack package, and is suited for applications where four independent switches are required. This popular hermetic ceramic package combined with 1,500Vdc isolation between input and output, and between four isolated relays, makes this device ideal for solid state relay applications.

    The CQMR310 is available over the full military temperature range, with quality and screening levels ranging from Commercial and Industrial, to Defence and Space. Gold plated leads are standard. However, other lead finishes per MIL-PRF-38534 are also available.

    Functionally, each relay is actuated by an input current that can be driven from a standard TTL device. The input current bodes a light emitting diode that is optically coupled to an integrated photovoltaic diode array. The photovoltaic diode array energises control circuitry that operates the output MOSFET.

    Absolute maximum ratings, recommended operating conditions, electrical specifications and performance characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted in the datasheet.

    Key features of the ISOCOM CQMR310 include:

    • Released to European Standard and complies to MIL-STD
    • Withstand test voltage up to 1,500Vdc
    • Output Withstand Voltage 100V
    • Continuous Output Current of 0.8A
    • 3A Output Surge
    • High Level of Transient Immunity
    • Optically Coupled between Input and Output
    • Hermetically Sealed

    Typical applications for the ISOCOM CQMR310 include:

    • Space Equipment and Systems
    • Military and High Reliability Systems
    • Aircraft Controls
    • Standard 28 VDC and 48 VDC Load Driver
    • Electromechanical and Solid State Relay Replacement

     

    ISOCOM is a leading manufacturer of high-reliability optocouplers and optoelectronic components, specializing in products designed for space, military, and industrial applications. With a focus on radiation-hardened and hermetically sealed devices, ISOCOM provides components known for durability in extreme environments. To learn more about their wide range of products and industry expertise, you can visit their website at www.isocom.uk.com.

    The post ISOCOM CQMR310 appeared first on Rhopoint Components.

    ]]>