Passive Input Digital Isolators - Rhopoint Components

NVE IL612A-3E

Admin — Mon, 23 Nov 2020 20:50:41 +0000

The IL612A-3E passive input digital isolator from NVE is a two channel signal coupler with flexible, wide range of input voltage and open drain output. This isolator features data rate of 10Mbps, working voltage of 150V_RMS and endures high voltage of 1kV_rms/1.5kVdc. The IL612A-2E is available in an 16-pin 0.15″ SOIC package, specified over a temperature range of −40°C to +85°C. The IL612A series from NVE are a passive input digital isolator devices manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. They have a similar interface but better performance than optocouplers, featuring a higher package density and functioning over a wide range of data ranges, edge speeds and power supply levels. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL612A series, including IL612A-3E is UL1577 recognised and certified to IEC 60747-5-5 (VDE 0884).

Surface-mount passive input digital isolator with open drainoutput
Two channel, multidirectional isolation
High speed with data rate of 10 Mbps
Flexible input with range of input voltage ranges
Working voltage of 150V_RMS
Current input of 5mA
Failsafe output (logic high output for zero coil current)
High voltage endurance of 1kV_rms/1.5kVdc
Temperature range of −40°C to +85°C
No carrier or clock for low EMI emissions and susceptibility
20 kV/μs typical (15 kV/μs minimum) common mode transient immunity
Typical pulse width distortion of 3ns
Typical propagation delay of 8ns
Barrier life of 44000 years
Good magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.15″ SOIC package

Typical applications for the IL612A series include:

Digital fieldbus
Optocoupler replacement
RS-485, RS-422 or RS-232
CAN Bus / Device Net
Differetial line receiver
SPI interface
Space-critical multi-channel applications

The below table gives the recommended operating conditions of the NVE IL612A high speed digital isolator series including the IL612A-3E:

The post NVE IL612A-3E appeared first on Rhopoint Components.

NVE IL612A-2E

Admin — Mon, 23 Nov 2020 20:50:41 +0000

The IL612A-2E passive input digital isolator from NVE is a two channel signal coupler with flexible, wide range of input voltage and open drain output. This isolator features data rate of 10Mbps, working voltage of 300V_RMS and endures high voltage of 1kV_rms/1.5kVdc. The IL612A-2E is available in an 8-pin PDIP package, specified over a temperature range of −40°C to +85°C. The IL612A series from NVE are a passive input digital isolator devices manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. They have a similar interface but better performance than optocouplers, featuring a higher package density and functioning over a wide range of data ranges, edge speeds and power supply levels. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL612A series, including IL612A-2E is UL1577 recognised and certified to IEC 60747-5-5 (VDE 0884).

Surface-mount passive input digital isolator with open drain output
Two channel, multidirectional isolation
High speed with data rate of 10 Mbps
Flexible input with range of input voltage ranges
Working voltage of 300V_RMS
Current input of 5mA
Failsafe output (logic high output for zero coil current)
High voltage endurance of 1kV_rms/1.5kVdc
Temperature range of −40°C to +85°C
No carrier or clock for low EMI emissions and susceptibility
20 kV/μs typical (15 kV/μs minimum) common mode transient immunity
Typical pulse width distortion of 3ns
Typical propagation delay of 8ns
Barrier life of 44000 years
Good magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin PDIP package

Typical applications for the IL612A series include:

Digital fieldbus
Optocoupler replacement
RS-485, RS-422 or RS-232
CAN Bus / Device Net
Differetial line receiver
SPI interface
Space-critical multi-channel applications

The below table gives the recommended operating conditions of the NVE IL612A high speed digital isolator series including the IL612A-2E:

The post NVE IL612A-2E appeared first on Rhopoint Components.

NVE IL611A-3E

Admin — Mon, 23 Nov 2020 20:50:41 +0000

The IL611A-3E passive input digital isolator from NVE is a two channel signal coupler with flexible, wide range of input voltage and open drain output. This isolator features data rate of 10Mbps, working voltage of 150V_RMS and endures high voltage of 1kV_rms/1.5kVdc. The IL611A-2E is available in an 16-pin 0.15″ SOIC package, specified over a temperature range of −40°C to +85°C. The IL611A series from NVE are a passive input digital isolator devices manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. They have a similar interface but better performance than optocouplers, featuring a higher package density and functioning over a wide range of data ranges, edge speeds and power supply levels. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL611A series, including IL611A-3E is UL1577 recognised and certified to IEC 60747-5-5 (VDE 0884).

Surface-mount passive input digital isolator with open drain output
Two channel, unidirectional isolation
High speed with data rate of 10 Mbps
Flexible input with range of input voltage ranges
Working voltage of 150V_RMS
Current input of 5mA
Failsafe output (logic high output for zero coil current)
High voltage endurance of 1kV_rms/1.5kVdc
Temperature range of −40°C to +85°C
No carrier or clock for low EMI emissions and susceptibility
20 kV/μs typical (15 kV/μs minimum) common mode transient immunity
Typical pulse width distortion of 3ns
Typical propagation delay of 8ns
Barrier life of 44000 years
Good magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.15″ SOIC package

Typical applications for the IL611A series include:

Digital fieldbus
Optocoupler replacement
RS-485, RS-422 or RS-232
CAN Bus / Device Net
Differetial line receiver
SPI interface
Space-critical multi-channel applications

The below table gives the recommended operating conditions of the NVE IL611A high speed digital isolator series including the IL611A-3E:

The post NVE IL611A-3E appeared first on Rhopoint Components.

NVE IL611A-2E

Admin — Mon, 23 Nov 2020 20:50:41 +0000

The IL611A-2E passive input digital isolator from NVE is a two channel signal coupler with flexible, wide range of input voltage and open drain output. This isolator features data rate of 10Mbps, working voltage of 300V_RMS and endures high voltage of 1kV_rms/1.5kVdc. The IL611A-2E is available in an 8-pin PDIP package, specified over a temperature range of −40°C to +85°C. The IL611A series from NVE are a passive input digital isolator CMOS devices manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. They have a similar interface but better performance than optocouplers, featuring a higher package density and functioning over a wide range of data ranges, edge speeds and power supply levels. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL611A series, including IL611A-2E is UL1577 recognised and certified to IEC 60747-5-5 (VDE 0884).

Surface-mount passive input digital isolator with open drain output
Two channel, unidirectional isolation
High speed with data rate of 100 Mbps
Flexible input with range of input voltage ranges
Working voltage of 300V_RMS
Current input of 5mA
Failsafe output (logic high output for zero coil current)
High voltage endurance of 1kV_rms/1.5kVdc
Temperature range of −40°C to +85°C
No carrier or clock for low EMI emissions and susceptibility
20 kV/μs typical (15 kV/μs minimum) common mode transient immunity
Typical pulse width distortion of 3ns
Typical propagation delay of 8ns
Barrier life of 44000 years
Good magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin PDIP package

Typical applications for the IL611A series include:

Digital fieldbus
Optocoupler replacement
RS-485, RS-422 or RS-232
CAN Bus / Device Net
Differetial line receiver
SPI interface
Space-critical multi-channel applications

The below table gives the recommended operating conditions of the NVE IL611A high speed digital isolator series including the IL611A-2E:

The post NVE IL611A-2E appeared first on Rhopoint Components.

NVE IL611A-1E

Admin — Mon, 23 Nov 2020 20:50:41 +0000

The IL611A-1E passive input digital isolator from NVE is a two channel signal coupler with flexible, wide range of input voltage and open drain output. This isolator features data rate of 10Mbps, working voltage of 150V_RMS and endures high voltage of 1kV_rms/1.5kVdc. The IL611A-1E is available in an 8-pin MSOP package, specified over a temperature range of −40°C to +85°C. The IL611A series from NVE are a passive input digital isolator devices manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. They have a similar interface but better performance than optocouplers, featuring a higher package density and functioning over a wide range of data ranges, edge speeds and power supply levels. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL611A series, including IL611A-1E is UL1577 recognised and certified to IEC 60747-5-5 (VDE 0884).

Surface-mount passive input digital isolator with open drain output
Two channel, unidirectional isolation
High speed with data rate of 10 Mbps
Flexible input with range of input voltage ranges
Working voltage of 150V_RMS
Current input of 5mA
Failsafe output (logic high output for zero coil current)
High voltage endurance of 1kV_rms/1.5kVdc
Temperature range of −40°C to +85°C
No carrier or clock for low EMI emissions and susceptibility
20 kV/μs typical (15 kV/μs minimum) common mode transient immunity
Typical pulse width distortion of 3ns
Typical propagation delay of 8ns
Barrier life of 44000 years
Good magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin MSOP package

Typical applications for the IL611A series include:

Digital fieldbus
Optocoupler replacement
RS-485, RS-422 or RS-232
CAN Bus / Device Net
Differetial line receiver
SPI interface
Space-critical multi-channel applications

The below table gives the recommended operating conditions of the NVE IL611A high speed digital isolator series including the IL611A-1E:

The post NVE IL611A-1E appeared first on Rhopoint Components.

NVE IL610A-3E

Admin — Mon, 23 Nov 2020 20:50:41 +0000

The IL610A-3E passive input digital isolator from NVE is a single channel signal coupler with flexible, wide range of input voltage and open drain output. This isolator features data rate of 10Mbps, working voltage of 150V_RMS and endures high voltage of 1kV_rms/1.5kVdc. The IL610A-3E is available in an 16-pin 0.15″ SOIC package, specified over a temperature range of −40°C to +85°C. The IL610A series from NVE are a passive input digital isolator devices manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. They have a similar interface but better performance than optocouplers, featuring a higher package density and functioning over a wide range of data ranges, edge speeds and power supply levels. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL610A series, including IL610A-3E is UL1577 recognised and certified to IEC 60747-5-5 (VDE 0884).

Surface-mount passive input digital isolator with open drain output
Single channel isolation
High speed with data rate of 10 Mbps
Flexible input with range of input voltage ranges
Working voltage of 150V_RMS
Current input of 5mA
Failsafe output (logic high output for zero coil current)
High voltage endurance of 1kV_rms/1.5kVdc
Temperature range of −40°C to +85°C
No carrier or clock for low EMI emissions and susceptibility
20 kV/μs typical (15 kV/μs minimum) common mode transient immunity
Typical pulse width distortion of 3ns
Typical propagation delay of 8ns
Barrier life of 44000 years
Good magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.15″ SOIC package

Typical applications for the IL610A series include:

Digital fieldbus
Optocoupler replacement
RS-485, RS-422 or RS-232
CAN Bus / Device Net
Differetial line receiver
SPI interface
Space-critical multi-channel applications

The below table gives the recommended operating conditions of the NVE IL610A high speed digital isolator series including the IL610A-3E:

The post NVE IL610A-3E appeared first on Rhopoint Components.

NVE IL614-3E

Admin — Mon, 23 Nov 2020 20:50:07 +0000

The IL614-3E passive input digital isolator from NVE is a three channel signal coupler with flexible, wide range of input voltage and CMOS output. This isolator features data rate of 100Mbps, working voltage of 150V_RMS and endures high voltage of 1kV_rms/1.5kVdc. The IL614-3E is available in an 16-pin 0.15″ SOIC package, specified over a temperature range of −40°C to +85°C. The IL614 series from NVE are a passive input digital isolator CMOS devices manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. They have a similar interface but better performance than optocouplers, featuring a higher package density and functioning over a wide range of data ranges, edge speeds and power supply levels. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL614 series, including IL614-3E is UL1577 recognised and certified to IEC 60747-5-5 (VDE 0884).

Surface-mount passive input digital isolator with CMOS output
Three channel multidirectional isolation
High speed with data rate of 100 Mbps
Flexible input with range of input voltage ranges
Working voltage of 150V_RMS
Current input of 5mA
Failsafe output (logic high output for zero coil current)
High voltage endurance of 1kV_rms/1.5kVdc
Temperature range of −40°C to +85°C
No carrier or clock for low EMI emissions and susceptibility
20 kV/μs typical (15 kV/μs minimum) common mode transient immunity
Typical pulse width distortion of 3ns
Typical propagation delay of 8ns
Barrier life of 44000 years
Good magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.15″ SOIC package

Typical applications for the IL614 series include:

Digital fieldbus
Optocoupler replacement
RS-485, RS-422 or RS-232
CAN Bus / Device Net
Differetial line receiver
SPI interface
Space-critical multi-channel applications

The below table gives the recommended operating conditions of the NVE IL614 high speed digital isolator series including the IL614-3E:

The post NVE IL614-3E appeared first on Rhopoint Components.

NVE IL610A-2E

Admin — Mon, 23 Nov 2020 20:50:07 +0000

The IL610A-2E passive input digital isolator from NVE is a single channel signal coupler with flexible, wide range of input voltage and open drain output. This isolator features data rate of 10Mbps, working voltage of 300V_RMS and endures high voltage of 1kV_rms/1.5kVdc. The IL610A-2E is available in an 8-pin PDIP package, specified over a temperature range of −40°C to +85°C. The IL610A series from NVE are a passive input digital isolator devices manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. They have a similar interface but better performance than optocouplers, featuring a higher package density and functioning over a wide range of data ranges, edge speeds and power supply levels. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL610A series, including IL610A-2E is UL1577 recognised and certified to IEC 60747-5-5 (VDE 0884).

Surface-mount passive input digital isolator with open drain output
Single channel isolation
High speed with data rate of 10 Mbps
Flexible input with range of input voltage ranges
Working voltage of 300V_RMS
Current input of 5mA
Failsafe output (logic high output for zero coil current)
High voltage endurance of 1kV_rms/1.5kVdc
Temperature range of −40°C to +85°C
No carrier or clock for low EMI emissions and susceptibility
20 kV/μs typical (15 kV/μs minimum) common mode transient immunity
Typical pulse width distortion of 3ns
Typical propagation delay of 8ns
Barrier life of 44000 years
Good magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin PDIP package

Typical applications for the IL610A series include:

Digital fieldbus
Optocoupler replacement
RS-485, RS-422 or RS-232
CAN Bus / Device Net
Differetial line receiver
SPI interface
Space-critical multi-channel applications

The below table gives the recommended operating conditions of the NVE IL610A high speed digital isolator series including the IL610A-2E:

The post NVE IL610A-2E appeared first on Rhopoint Components.

NVE IL610A-1E

Admin — Mon, 23 Nov 2020 20:50:07 +0000

The IL610A-1E passive input digital isolator from NVE is a single channel signal coupler with flexible, wide range of input voltage and open drain output. This isolator features data rate of 10Mbps, working voltage of 150V_RMS and endures high voltage of 1kV_rms/1.5kVdc. The IL610A-1E is available in an 8-pin MSOP package, specified over a temperature range of −40°C to +85°C. The IL610A series from NVE are a passive input digital isolator devices manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. They have a similar interface but better performance than optocouplers, featuring a higher package density and functioning over a wide range of data ranges, edge speeds and power supply levels. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL610A series, including IL610A-1E is UL1577 recognised and certified to IEC 60747-5-5 (VDE 0884).

Surface-mount passive input digital isolator with open drain output
Single channel isolation
Data rate of 10 Mbps
Flexible input with range of input voltage ranges
Working voltage of 150V_RMS
Current input of 5mA
Failsafe output (logic high output for zero coil current)
High voltage endurance of 1kV_rms/1.5kVdc
Temperature range of −40°C to +85°C
No carrier or clock for low EMI emissions and susceptibility
20 kV/μs typical (15 kV/μs minimum) common mode transient immunity
Typical propagation delay of 20ns (high to low) or 50ns (low to high) typical
Barrier life of 44000 years
Good magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin MSOP package

Typical applications for the IL610A series include:

General purpose optocoupler replacement
RS-485, RS-422 or RS-232
Wired-OR alarms
I²C
Isolated relays and acutators
Space-critical multi-channel applications

The below table gives the recommended operating conditions of the NVE IL610A high speed digital isolator series including the IL610A-1E:

The post NVE IL610A-1E appeared first on Rhopoint Components.

NVE IL614E

Admin — Mon, 23 Nov 2020 20:50:07 +0000

The IL614E passive input digital isolator from NVE is a three channel signal coupler with flexible, wide range of input voltage and CMOS output. This isolator features data rate of 100Mbps, working voltage of 300V_RMS and endures high voltage of 1kV_rms/1.5kVdc. The IL614E is available in an 16-pin 0.3″ SOIC package, specified over a temperature range of −40°C to +85°C. The IL614 series from NVE are a passive input digital isolator CMOS devices manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. They have a similar interface but better performance than optocouplers, featuring a higher package density and functioning over a wide range of data ranges, edge speeds and power supply levels. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL614 series, including IL614E is UL1577 recognised and certified to IEC 60747-5-5 (VDE 0884).

Surface-mount passive input digital isolator with CMOS output
Three channel, multidirectional isolation
High speed with data rate of 100 Mbps
Flexible input with range of input voltage ranges
Working voltage of 300V_RMS
Current input of 5mA
Failsafe output (logic high output for zero coil current)
High voltage endurance of 1kV_rms/1.5kVdc
Temperature range of −40°C to +85°C
No carrier or clock for low EMI emissions and susceptibility
20 kV/μs typical (15 kV/μs minimum) common mode transient immunity
Typical pulse width distortion of 3ns
Typical propagation delay of 8ns
Barrier life of 44000 years
Good magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

Typical applications for the IL614 series include:

Digital fieldbus
Optocoupler replacement
RS-485, RS-422 or RS-232
CAN Bus / Device Net
Differetial line receiver
SPI interface
Space-critical multi-channel applications

The below table gives the recommended operating conditions of the NVE IL613 high speed digital isolator series including the IL613E:

The post NVE IL614E appeared first on Rhopoint Components.