Bus Transceivers - Digital Isolators - Rhopoint Components

NVE IL41050TA-1E

Admin — Mon, 23 Nov 2020 20:54:09 +0000

The IL41050TA-1E high speed, low-power CAN transciever from NVE is a galvanically isolated device designed as an interface between the CAN protocol controller and the physical bus. The IL41050TA series is also compatible with 3V and 5V input supplies. The device uses NVE’s patented IsoLoop spintronic Giant
Magnetoresistance (GMR) technology to provide isolated differential transmit capability to the bus and isolated differential receive capability to the CAN controller. These transcievers feature unique ceramic/polymer composite barrier providing excellent isolation and virtually unlimited barrier life. IL41050TA-1E comes in an ultraminiature QSOP
package and is fully compliant with the ISO 11898 CAN standard, VDE V 0884-10 certified and UL 1577 recognised.

High-speed, low-power isolated CAN transciever
Power supply V_DD1 3.0V to 5.5V, V_DD2 4.75V to 5.25V
Data rate of 1Mbps
180ns typical loop delay
Isolation voltage of 2.5kV_RMS per VDE V 0884-10
Working voltage of 600V_RMS per VDE V 0884-10
Temperature range of −55°C to +125°C
70mA maximum bus-side dynamic supply current
12mA maximum quiescent recessive supply current
110-node fan-out
Thermal shutdown protection
No carrier or clock for low emissions and EMI susceptibility
Silent mode to disable transmitter
Edge-triggered, non-volatile input improves noise performance
UL 1577 recognised, VDE V 0884-10 certified, fully compliand with the ISO 11898 CAN standard
QSOP package

The IL41050TA series has current limiting and thermal shutdown features to protect against output short circuits and bus contentions that may cause excessive power dissipation.

Typical applications for the IL41050TA series include:

Factory automation
Battery management systems
Noise-critical CAN
DeviceNet

The below table gives the recommended operating conditions for the NVE IL41050TA high-speed, low power isolated CAN transciever series, including IL41050TA-1E:

The post NVE IL41050TA-1E appeared first on Rhopoint Components.

NVE IL41050TA-3E

Admin — Mon, 23 Nov 2020 20:54:09 +0000

The IL41050TA-3E high speed, low-power CAN transciever from NVE is a galvanically isolated device designed as an interface between the CAN protocol controller and the physical bus. The IL41050TA series is also compatible with 3V and 5V input supplies. The device uses NVE’s patented IsoLoop spintronic Giant
Magnetoresistance (GMR) technology to provide isolated differential transmit capability to the bus and isolated differential receive capability to the CAN controller. These transcievers feature unique ceramic/polymer composite barrier providing excellent isolation and virtually unlimited barrier life. IL41050TA-3E comes in a 0.15″ 16-pin SOIC
package and is fully compliant with the ISO 11898 CAN standard, VDE V 0884-10 certified and UL 1577 recognised.

High-speed, low-power isolated CAN transciever
Power supply V_DD1 3.0V to 5.5V, V_DD2 4.75V to 5.25V
Data rate of 1Mbps
180ns typical loop delay
Isolation voltage of 2.5kV_RMS per VDE V 0884-10
Working voltage of 600V_RMS per VDE V 0884-10
Temperature range of −55°C to +125°C
70mA maximum bus-side dynamic supply current
12mA maximum quiescent recessive supply current
110-node fan-out
Thermal shutdown protection
No carrier or clock for low emissions and EMI susceptibility
Silent mode to disable transmitter
Edge-triggered, non-volatile input improves noise performance
UL 1577 recognised, VDE V 0884-10 certified, fully compliand with the ISO 11898 CAN standard
0.15″ 16-pin SOIC package

The IL41050TA series has current limiting and thermal shutdown features to protect against output short circuits and bus contentions that may cause excessive power dissipation.

Typical applications for the IL41050TA series include:

Factory automation
Battery management systems
Noise-critical CAN
DeviceNet

The below table gives the recommended operating conditions for the NVE IL41050TA high-speed, low power isolated CAN transciever series, including IL41050TA-3E:

The post NVE IL41050TA-3E appeared first on Rhopoint Components.

NVE IL41050TAE

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL41050TAE high speed, low-power CAN transciever from NVE is a galvanically isolated device designed as an interface between the CAN protocol controller and the physical bus. The IL41050 series is also compatible with 3V and 5V input supplies. The device uses NVE’s patented IsoLoop spintronic Giant
Magnetoresistance (GMR) technology to provide isolated differential transmit capability to the bus and isolated differential receive capability to the CAN controller. These transcievers feature unique ceramic/polymer composite barrier providing excellent isolation and virtually unlimited barrier life. IL41050TAE comes in a 0.3″ 16-pin SOIC
package and is fully compliant with the ISO 11898 CAN standard, VDE V 0884-10 certified and UL 1577 recognised.

High-speed, low-power isolated CAN transciever
Power supply V_DD1 3.0V to 5.5V, V_DD2 4.75V to 5.25V
Data rate of 1Mbps
180ns typical loop delay
Isolation voltage of 2.5kV_RMS per VDE V 0884-10
Working voltage of 600V_RMS per VDE V 0884-10
Temperature range of −55°C to +125°C
70mA maximum bus-side dynamic supply current
12mA maximum quiescent recessive supply current
110-node fan-out
Thermal shutdown protection
No carrier or clock for low emissions and EMI susceptibility
Silent mode to disable transmitter
Edge-triggered, non-volatile input improves noise performance
UL 1577 recognised, VDE V 0884-10 certified, fully compliand with the ISO 11898 CAN standard
0.3″ 16-pin SOIC package

The IL41050TA series has current limiting and thermal shutdown features to protect against output short circuits and bus contentions that may cause excessive power dissipation.

Typical applications for the IL41050 series include:

Factory automation
Battery management systems
Noise-critical CAN
DeviceNet

The below table gives the recommended operating conditions for the NVE IL41050 high-speed, low power isolated CAN transciever series, including IL41050TAE:

The post NVE IL41050TAE appeared first on Rhopoint Components.

NVE IL2985E

Admin — Mon, 23 Nov 2020 20:52:39 +0000

The IL2985E low-power, galvanically isolated RS-485 differential bus transceiver from NVE offers data rate of 4Mbps and very low quiescent current, typically 2.4mA (I_DD1Q+I_DD2Q). The IL2985 series delivers at least 1.5V into a 54Ω load for excellent data integrity over long cables, and is also compatible with 3V power supplies. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. This particular device uses NVE’s patented IsoLoop spintronic Giant Magnetoresistance (GMR) technology and comes in a 0.3″ 16-pin SOIC package.

Surface-mount low-power, galvanically isolated RS-485 transceiver
3V abd 5V power supplies
Data rate of 4Mbps
7kV bus ESD protection
Isolation of 2.5kV_RMS
Working voltage of 300V_RMS
Temperature range of −40°C to +85°C
Typical common mode transiend immunity of 50kV/μs (30kV/μs minimum)
Supports up to 32 nodes
Thermal shutdown protection
UL 1577 and VDE V 0884-10 pending; meets or exceeds ANSI RS-485 and ISO 8482:1987(E)
0.3″ 16-pin SOIC package

The IL2985 has current limiting and thermal shutdown features to protect against output short circuits and bus contentions that may cause excessive power dissipation, and also incorporate a “fail-safe if open” design, ensuring a logic high on R if the bus lines are disconnected or “floating.”

Typical applications for the IL2985 series include:

Metering
Battery-powered RS-485 nodes
Factory automation
Industrial control networks
Building environmental controls
Equipment covered under IEC 61010-1 Edition 3

The below table gives the recommended operating conditions for the NVE IL2985E low-power transceiver:

The post NVE IL2985E appeared first on Rhopoint Components.

NVE IL485WE

Admin — Mon, 23 Nov 2020 20:52:39 +0000

The IL485WE isolated RS-485 interface with handshake from NVE is an industry-standard differential bus transciever, designed to galvanically isolate bidirectional data communication over balanced transmission lines. DE/ISODE and IN1/OUT1 allow isolated RTSAS and DTSAS
handshaking. The IL485 series is also compatible with 3V and 5V input supplies. The device uses NVE’s patented IsoLoop spintronic Giant
Magnetoresistance (GMR) technology and comes in a 0.3″ 16-pin SOIC package. IL485 was the first isolated RS-485 transciever in a standard 16-pin SOIC package to meed the ANSI Standards EIA/TIA-422-B and RS-485.

Industry-standard, surface-mount RS-485 isolated transceiver with handshake
Power supply V_DD1 3.3V to 5V, V_DD2 4.5V to 5.5V
Data rate of 35Mbps
1ns typical pulse skew
Isolation voltage of 2.5kV_RMS per VDE V 0884-10
Temperature range of −40°C to +85°C
PROFIBUS compatible
±60mA Driver output capability
Thermal shutdown protection
Typical propagation delay of 24ns (5V)
UL 1577 and IEC 61010-2001 approved, meets or exceeds ANSI RS-485 and ISO 8482:1987(E)
0.3″ 16-pin SOIC package

The IL485 series has current limiting and thermal shutdown features to protect against output short circuits and bus contentions that may cause excessive power dissipation.

Typical applications for the IL485 series include:

PROFIBUS/RS-485 Systems
Multiple data point transmission

The below table gives the recommended operating conditions for the NVE IL485WE isolated RS485 transciever:

The post NVE IL485WE appeared first on Rhopoint Components.

NVE IL485E

Admin — Mon, 23 Nov 2020 20:52:39 +0000

The IL485E isolated RS-485 interface from NVE is an industry-standard differential bus transciever, designed to galvanically isolate bidirectional data communication over balanced transmission lines. The IL485 series is also compatible with 3V and 5V input supplies. The device uses NVE’s patented IsoLoop spintronic Giant
Magnetoresistance (GMR) technology and comes in a 0.3″ 16-pin SOIC
package.
IL485 was the first isolated RS-485 transciever in a standard 16-pin SOIC package to meed the ANSI Standards EIA/TIA-422-B and RS-485.

Industry-standard, surface-mount RS-485 isolated transceiver
Power supply V_DD1 3.3V to 5V, V_DD2 4.5V to 5.5V
Data rate of 35Mbps
1ns typical pulse skew
Isolation voltage of 2.5kV_RMS per VDE V 0884-10
Temperature range of −40°C to +85°C
PROFIBUS compatible
±60mA Driver output capability
Thermal shutdown protection
Typical propagation delay of 24ns (5V)
UL 1577 and IEC 61010-2001 approved, meets or exceeds ANSI RS-485 and ISO 8482:1987(E)
0.3″ 16-pin SOIC package

The IL485 series has current limiting and thermal shutdown features to protect against output short circuits and bus contentions that may cause excessive power dissipation.

Typical applications for the IL485 series include:

Multi-point or multi-drop transmission on long bus lines in noisy environments

The below table gives the recommended operating conditions for the NVE IL485E isolated RS485 transciever:

The post NVE IL485E appeared first on Rhopoint Components.

NVE IL422E

Admin — Mon, 23 Nov 2020 20:52:39 +0000

The IL422E isolated RS-485/RS422 interface from NVE is an industry-standard differential bus transciever, designed to galvanically isolate bidirectional data communication over balanced transmission lines. The IL422 series is also compatible with 3V and 5V input supplies. The device uses NVE’s patented IsoLoop spintronic Giant
Magnetoresistance (GMR) technology and comes in a 0.3″ 16-pin SOIC
package.
IL422 was the first isolated RS-422 transciever in a standard 16-pin SOIC package to meed the ANSI Standards EIA/TIA-422-B and RS-485.

Industry-standard, surface-mount RS-485/RS422 isolated transceiver
Power supply V_DD1 3.3V to 5V, V_DD2 4.5V to 5.5V
Data rate of 25Mbps
1ns typical pulse skew
Isolation voltage of 2.5kV_RMS per VDE V 0884-10
Working voltage of 600V_RMS per VDE V 0884-10
Temperature range of −40°C to +85°C
PROFIBUS compatible
Low EMC Footprint
±60mA Driver output capability
Thermal shutdown protection
Typical propagation delay of 24ns (5V)
UL 1577 approved, VDE V 0884-10 certified, meets or exceeds ANSI 422-B, EIA 485-A and ITU recommended V11
0.3″ 16-pin SOIC package

The IL422 series has current limiting and thermal shutdown features to protect against output short circuits and bus contentions that may cause excessive power dissipation.

Typical applications for the IL422 series include:

Multi-point or multi-drop transmission on long bus lines in noisy environments

The below table gives the recommended operating conditions for the NVE IL422E isolated RS485/RS422 transciever:

The post NVE IL422E appeared first on Rhopoint Components.

NVE IL3685VE

Admin — Mon, 23 Nov 2020 20:52:39 +0000

The IL3685VE PROFIBUS-compatible, galvanically isolated RS-485 transceiver with reinforced insulation from NVE offers data rate of 40Mbps and is designed for bidirectional data communication on balanced transmission lines, while being fully compliant with PROFIBUS specifications, including the differential output voltage. The IL3685 series is compatible with 3V and 5V power supplies. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. This particular device uses NVE’s patented IsoLoop spintronic Giant Magnetoresistance (GMR) technology and comes in a 0.3″ 16-pin SOIC package.

Surface-mount PROFIBUS-compatible galvanically isolated RS-485 transceiver
3V and 5V power supplies
Data rate of 40Mbps
15kV bus ESD protection
Reinforced isolation of 6kV_RMS per VDE V 0884-10
Working voltage of 1kV_RMS per VDE V 0884-10
Temperature range of −40°C to +85°C
Typical common mode transiend immunity of 50kV/μs (30kV/μs minimum)
Propagation delay as low as 20ns
Thermal shutdown protection
UL 1577 recognised, VDE V 0884-10 certified; meets or exceeds ANSI RS-485 and ISO 8482:1987(E)
0.3″ 16-pin SOIC package

The IL3685 has current limiting and thermal shutdown features to protect against output short circuits and bus contentions that may cause excessive power dissipation, and also incorporate a “fail-safe if open” design, ensuring a logic high on R if the bus lines are disconnected or “floating.”

Typical applications for the IL3685 series include:

PROFIBUS, PROFIBUS DP and FMS networks
Factory automation
Industrial control networks
Building environmental controls
Equipment covered under IEC 61010-1 Edition 3

The below table gives the recommended operating conditions for the NVE IL3685 isolated RS-485 transceiver series, including IL3685E:

The post NVE IL3685VE appeared first on Rhopoint Components.

NVE IL3685-3E

Admin — Mon, 23 Nov 2020 20:52:39 +0000

The IL3685-3E PROFIBUS-compatible, galvanically isolated RS-485 transceiver from NVE offers data rate of 40Mbps and is designed for bidirectional data communication on balanced transmission lines, while being fully compliant with PROFIBUS specifications, including the differential output voltage. The IL3685 series is compatible with 3V and 5V power supplies. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. This particular device uses NVE’s patented IsoLoop spintronic Giant Magnetoresistance (GMR) technology and comes in a 1.5″ 16-pin SOIC package.

Surface-mount PROFIBUS-compatible galvanically isolated RS-485 transceiver
3V and 5V power supplies
Data rate of 40Mbps
15kV bus ESD protection
Isolation of 2.5kV_RMS per VDE V 0884-10
Working voltage of 600V_RMS per VDE V 0884-10
Temperature range of −40°C to +85°C
Typical common mode transiend immunity of 50kV/μs (30kV/μs minimum)
Propagation delay as low as 20ns
Thermal shutdown protection
UL 1577 recognised, VDE V 0884-10 certified; meets or exceeds ANSI RS-485 and ISO 8482:1987(E)
1.5″ 16-pin SOIC package

Typical applications for the IL3685 series include:

PROFIBUS, PROFIBUS DP and FMS networks
Factory automation
Industrial control networks
Building environmental controls
Equipment covered under IEC 61010-1 Edition 3

The below table gives the recommended operating conditions for the NVE IL3685 isolated RS-485 transceiver series, including IL3685-1E:

The post NVE IL3685-3E appeared first on Rhopoint Components.

NVE IL3685-1E

Admin — Mon, 23 Nov 2020 20:52:39 +0000

The IL3685-1E PROFIBUS-compatible, galvanically isolated RS-485 transceiver from NVE offers data rate of 40Mbps and is designed for bidirectional data communication on balanced transmission lines, while being fully compliant with PROFIBUS specifications, including the differential output voltage. The IL3685 series is compatible with 3V and 5V power supplies. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. This particular device uses NVE’s patented IsoLoop spintronic Giant Magnetoresistance (GMR) technology and comes in an ultraminiature QSOP package.

Surface-mount PROFIBUS-compatible galvanically isolated RS-485 transceiver
3V and 5V power supplies
Data rate of 40Mbps
15kV bus ESD protection
Isolation of 2.5kV_RMS per VDE V 0884-10
Working voltage of 600V_RMS per VDE V 0884-10
Temperature range of −40°C to +85°C
Typical common mode transiend immunity of 50kV/μs (30kV/μs minimum)
Propagation delay as low as 20ns
Thermal shutdown protection
UL 1577 recognised, VDE V 0884-10 certified; meets or exceeds ANSI RS-485 and ISO 8482:1987(E)
Ultraminiature QSOP package

Typical applications for the IL3685 series include:

PROFIBUS, PROFIBUS DP and FMS networks
Factory automation
Industrial control networks
Building environmental controls
Equipment covered under IEC 61010-1 Edition 3

The below table gives the recommended operating conditions for the NVE IL3685 isolated RS-485 transceiver series, including IL3685-1E:

The post NVE IL3685-1E appeared first on Rhopoint Components.