Active Input Digital Isolators - Rhopoint Components

NVE IL817TE

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL817TE high temperature, DC correct, high speed digital isolator from NVE is rated with an isolation voltage of 2.5kV_rms and 600V_rms working voltage per VDE V 0884-10, these isolators are available in an ultraminiature 16-pin 0.3″ SOIC package and are specified over a temperature range of −40°C to +125°C. IL800 series are industry’s top-of-the-line isolators with the best specification within their class. They are manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology and featuring an internal refresher clock to ensure response to DC states of input within 9μs maximum. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

High speed, DC-correct digital isolator
Multidirectional four channel isolation(3 transmit, 1 receive)
High speed at 110 Mbps typical
Isolation voltage of 2.5kV_rms
Working voltage of 600 V_rms per VDE V 0884-10
Temperature range of −40°C to +125°C
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
Typical quiescent current 0.0013A per channel
Typical pulse width distortion of 2ns (at 5V)
Channel to channel skew 3ns
Typical propagation delay of 10ns
Barrier life of 44000 years
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

The NVE IL817TE series isolator provides a typical propagation delay of only 10ns and a pulse width distortion as low as 2ns, achieving the best specifications of any isolator. Typical transient immunity of 50 kV/µs is unsurpassed.

Typical applications for the IL800 series include:

Digital fieldbus
ADCs and DACs
Ground loop elimination
Multiplex data transmission
Board-to-board communication
Logic level shifting
RS-485 and RS-422
Digital noise reduction
Data interfaces
Peripheral interfaces
Parallel bus

The below table gives the recommended operating conditions of the NVE IL800 high speed digital isolator series including the IL817TE:

The post NVE IL817TE appeared first on Rhopoint Components.

NVE IL721TE

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL721TE high temperature, high speed digital isolator from NVE is a two channel CMOS device with typical data rate of 110Mbps. It features an isolation voltage of 2.5kV_rms and 600 V_rms working voltage per VDE V 0884-10. The IL721TE isolators are available in an 16-pin 0.3″ SOIC package and are specified over a temperature range of −40°C to +125°C. These isolators are the industry standard for solid-state signal isolation and the ultimate in usable data rate and performance. The IL721TE series from NVE are manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life. The IL721 series, including IL721TE is UL1577 recognised and certified to VDE V 0884-10.

High temperature, high speed digital isolator
Multidirectional two channel isolation (reverse pinout)
High speed at 110 Mbps typical
Isolation voltage of 2.5kV_rms
Working voltage of 600 V_rms per VDE V 0884-10
High operating temperature range of −40°C to +125°C
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
No carrier or clock for low EMI emissions and susceptibility
Typical quiescent current 0.0012A/channel
Typical pulse width distortion of 0.3ns at 5V (1ns at 3.3V)
Pulse jitter 100ps
Channel to channel skew 2ns
Typical propagation delay of 10ns
Barrier life of 44000 years
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin, 0.3″ SOIC package

The NVE IL721TE series symmetric magnetic coupling barrier provides a typical propagation delay of only 10ns and a pulse width distortion as low as 0.3ns, achieving the best specifications of any isolator. Typical transient immunity of 50 kV/µs is unsurpassed.

Typical applications for the IL721 series include:

Board-to-board communication
CANbus
Peripheral interfaces
Logic level shifting
Equipment covered under IEC 61010-1 Edition 3
5 kV_RMS rated IEC 60601-1 medical applications

The below table gives the recommended operating conditions of the NVE IL721 high speed digital isolator series including the IL721TE:

The post NVE IL721TE appeared first on Rhopoint Components.

NVE IL810T-3E

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL810T-3E high temperature, DC correct, high speed digital isolator from NVE is rated with an isolation voltage of 2.5kV_rms and 600V_rms working voltage per VDE V 0884-10, these isolators are available in an ultraminiature 8-pin SOIC package and are specified over a temperature range of −40°C to +125°C. IL800 series are industry’s top-of-the-line isolators with the best specification within their class. They are manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology and featuring an internal refresher clock to ensure response to DC states of input within 9μs maximum. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

High speed, DC-correct digital isolator
Single channel isolation
High speed at 110 Mbps typical
Isolation voltage of 2.5kV_rms
Working voltage of 600 V_rms per VDE V 0884-10
Temperature range of −40°C to +125°C
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
Typical quiescent current 0.0013A per channel
Typical pulse width distortion of 2ns (at 5V)
Channel to channel skew 3ns
Typical propagation delay of 10ns
Barrier life of 44000 years
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin SOIC package

The NVE IL810T-3E series isolator provides a typical propagation delay of only 10ns and a pulse width distortion as low as 2ns, achieving the best specifications of any isolator. Typical transient immunity of 50 kV/µs is unsurpassed.

Typical applications for the IL800 series include:

Digital fieldbus
ADCs and DACs
Ground loop elimination
Multiplex data transmission
Board-to-board communication
Logic level shifting
RS-485 and RS-422
Digital noise reduction
Data interfaces
Peripheral interfaces
Parallel bus

The below table gives the recommended operating conditions of the NVE IL800 high speed digital isolator series including the IL810T-3E:

The post NVE IL810T-3E appeared first on Rhopoint Components.

NVE IL811T-1E

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL811T-1E high temperature, DC correct, high speed digital isolator from NVE is rated with an isolation voltage of 1kV_rms and 600V_rms working voltage per VDE V 0884-10, these isolators are available in an ultraminiature 8-pin MSOP package and are specified over a temperature range of −40°C to +125°C. IL800 series are industry’s top-of-the-line isolators with the best specification within their class. They are manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology and featuring an internal refresher clock to ensure response to DC states of input within 9μs maximum. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

High speed, DC-correct digital isolator
Unidirectional two channel isolation
High speed at 110 Mbps typical
Isolation voltage of 1kV_rms
Working voltage of 600 V_rms per VDE V 0884-10
Temperature range of −40°C to +125°C
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
Typical quiescent current 0.0013A per channel
Typical pulse width distortion of 2ns (at 5V)
Channel to channel skew 3ns
Typical propagation delay of 10ns
Barrier life of 44000 years
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin MSOP package

The NVE IL811T-1E series isolator provides a typical propagation delay of only 10ns and a pulse width distortion as low as 2ns, achieving the best specifications of any isolator. Typical transient immunity of 50 kV/µs is unsurpassed.

Typical applications for the IL800 series include:

Digital fieldbus
ADCs and DACs
Ground loop elimination
Multiplex data transmission
Board-to-board communication
Logic level shifting
RS-485 and RS-422
Digital noise reduction
Data interfaces
Peripheral interfaces
Parallel bus

The below table gives the recommended operating conditions of the NVE IL800 high speed digital isolator series including the IL811T-1E:

The post NVE IL811T-1E appeared first on Rhopoint Components.

NVE IL811T-3E

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL811T-3E high temperature, DC correct, high speed digital isolator from NVE is rated with an isolation voltage of 2.5kV_rms and 600V_rms working voltage per VDE V 0884-10, these isolators are available in an ultraminiature 8-pin SOIC package and are specified over a temperature range of −40°C to +125°C. IL800 series are industry’s top-of-the-line isolators with the best specification within their class. They are manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology and featuring an internal refresher clock to ensure response to DC states of input within 9μs maximum. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

High speed, DC-correct digital isolator
Unidirectional two channel isolation
High speed at 110 Mbps typical
Isolation voltage of 2.5kV_rms
Working voltage of 600 V_rms per VDE V 0884-10
Temperature range of −40°C to +125°C
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
Typical quiescent current 0.0013A per channel
Typical pulse width distortion of 2ns (at 5V)
Channel to channel skew 3ns
Typical propagation delay of 10ns
Barrier life of 44000 years
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin SOIC package

The NVE IL811T-3E series isolator provides a typical propagation delay of only 10ns and a pulse width distortion as low as 2ns, achieving the best specifications of any isolator. Typical transient immunity of 50 kV/µs is unsurpassed.

Typical applications for the IL800 series include:

Digital fieldbus
ADCs and DACs
Ground loop elimination
Multiplex data transmission
Board-to-board communication
Logic level shifting
RS-485 and RS-422
Digital noise reduction
Data interfaces
Peripheral interfaces
Parallel bus

The below table gives the recommended operating conditions of the NVE IL800 high speed digital isolator series including the IL811T-3E:

The post NVE IL811T-3E appeared first on Rhopoint Components.

NVE IL821T-3E

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL821T-3E high temperature, DC correct, high speed digital isolator from NVE is rated with an isolation voltage of 2.5kV_rms and 600V_rms working voltage per VDE V 0884-10, these isolators are available in an ultraminiature 8-pin SOIC package and are specified over a temperature range of −40°C to +125°C. IL800 series are industry’s top-of-the-line isolators with the best specification within their class. They are manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology and featuring an internal refresher clock to ensure response to DC states of input within 9μs maximum. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

High speed, DC-correct digital isolator
Multidirectional two channel isolation
High speed at 110 Mbps typical
Isolation voltage of 2.5kV_rms
Working voltage of 600 V_rms per VDE V 0884-10
Temperature range of −40°C to +125°C
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
Typical quiescent current 0.0013A per channel
Typical pulse width distortion of 2ns (at 5V)
Channel to channel skew 3ns
Typical propagation delay of 10ns
Barrier life of 44000 years
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
8-pin SOIC package

The NVE IL821T-3E series isolator provides a typical propagation delay of only 10ns and a pulse width distortion as low as 2ns, achieving the best specifications of any isolator. Typical transient immunity of 50 kV/µs is unsurpassed.

Typical applications for the IL800 series include:

Digital fieldbus
ADCs and DACs
Ground loop elimination
Multiplex data transmission
Board-to-board communication
Logic level shifting
RS-485 and RS-422
Digital noise reduction
Data interfaces
Peripheral interfaces
Parallel bus

The below table gives the recommended operating conditions of the NVE IL800 high speed digital isolator series including the IL821T-3E:

The post NVE IL821T-3E appeared first on Rhopoint Components.

NVE IL821TE

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL821TE high temperature, DC correct, high speed digital isolator from NVE is rated with an isolation voltage of 2.5kV_rms and 600V_rms working voltage per VDE V 0884-10, these isolators are available in an ultraminiature 8-pin SOIC package and are specified over a temperature range of −40°C to +125°C. IL800 series are industry’s top-of-the-line isolators with the best specification within their class. They are manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology and featuring an internal refresher clock to ensure response to DC states of input within 9μs maximum. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

High speed, DC-correct digital isolator
Multidirectional two channel isolation
High speed at 110 Mbps typical
Isolation voltage of 2.5kV_rms
Working voltage of 600 V_rms per VDE V 0884-10
Temperature range of −40°C to +125°C
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
Typical quiescent current 0.0013A per channel
Typical pulse width distortion of 2ns (at 5V)
Channel to channel skew 3ns
Typical propagation delay of 10ns
Barrier life of 44000 years
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

The NVE IL821TE series isolator provides a typical propagation delay of only 10ns and a pulse width distortion as low as 2ns, achieving the best specifications of any isolator. Typical transient immunity of 50 kV/µs is unsurpassed.

Typical applications for the IL800 series include:

Digital fieldbus
ADCs and DACs
Ground loop elimination
Multiplex data transmission
Board-to-board communication
Logic level shifting
RS-485 and RS-422
Digital noise reduction
Data interfaces
Peripheral interfaces
Parallel bus

The below table gives the recommended operating conditions of the NVE IL800 high speed digital isolator series including the IL821TE:

The post NVE IL821TE appeared first on Rhopoint Components.

NVE IL814T-1E

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL814T-1E high temperature, DC correct, high speed digital isolator from NVE is rated with an isolation voltage of 2.5kV_rms and 600V_rms working voltage per VDE V 0884-10, these isolators are available in an ultraminiature 16-pin QSOP package and are specified over a temperature range of −40°C to +125°C. IL800 series are industry’s top-of-the-line isolators with the best specification within their class. They are manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology and featuring an internal refresher clock to ensure response to DC states of input within 9μs maximum. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

High speed, DC-correct digital isolator
Multidirectional three channel isolation
High speed at 110 Mbps typical
Isolation voltage of 2.5kV_rms
Working voltage of 600 V_rms per VDE V 0884-10
Temperature range of −40°C to +125°C
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
Typical quiescent current 0.0013A per channel
Typical pulse width distortion of 2ns (at 5V)
Channel to channel skew 3ns
Typical propagation delay of 10ns
Barrier life of 44000 years
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin QSOP package

The NVE IL814T-1E series isolator provides a typical propagation delay of only 10ns and a pulse width distortion as low as 2ns, achieving the best specifications of any isolator. Typical transient immunity of 50 kV/µs is unsurpassed.

Typical applications for the IL800 series include:

Digital fieldbus
ADCs and DACs
Ground loop elimination
Multiplex data transmission
Board-to-board communication
Logic level shifting
RS-485 and RS-422
Digital noise reduction
Data interfaces
Peripheral interfaces
Parallel bus

The below table gives the recommended operating conditions of the NVE IL800 high speed digital isolator series including the IL814T-1E:

The post NVE IL814T-1E appeared first on Rhopoint Components.

NVE IL814T-3E

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL814T-3E high temperature, DC correct, high speed digital isolator from NVE is rated with an isolation voltage of 2.5kV_rms and 600V_rms working voltage per VDE V 0884-10, these isolators are available in an ultraminiature 16-pin 0.15″ SOIC package and are specified over a temperature range of −40°C to +125°C. IL800 series are industry’s top-of-the-line isolators with the best specification within their class. They are manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology and featuring an internal refresher clock to ensure response to DC states of input within 9μs maximum. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

High speed, DC-correct digital isolator
Multidirectional three channel isolation
High speed at 110 Mbps typical
Isolation voltage of 2.5kV_rms
Working voltage of 600 V_rms per VDE V 0884-10
Temperature range of −40°C to +125°C
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
Typical quiescent current 0.0013A per channel
Typical pulse width distortion of 2ns (at 5V)
Channel to channel skew 3ns
Typical propagation delay of 10ns
Barrier life of 44000 years
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.15″ SOIC package

The NVE IL814T-3E series isolator provides a typical propagation delay of only 10ns and a pulse width distortion as low as 2ns, achieving the best specifications of any isolator. Typical transient immunity of 50 kV/µs is unsurpassed.

Typical applications for the IL800 series include:

Digital fieldbus
ADCs and DACs
Ground loop elimination
Multiplex data transmission
Board-to-board communication
Logic level shifting
RS-485 and RS-422
Digital noise reduction
Data interfaces
Peripheral interfaces
Parallel bus

The below table gives the recommended operating conditions of the NVE IL800 high speed digital isolator series including the IL814T-3E:

The post NVE IL814T-3E appeared first on Rhopoint Components.

NVE IL814TE

Admin — Mon, 23 Nov 2020 20:53:30 +0000

The IL814TE high temperature, DC correct, high speed digital isolator from NVE is rated with an isolation voltage of 2.5kV_rms and 600V_rms working voltage per VDE V 0884-10, these isolators are available in an ultraminiature 16-pin 0.3″ SOIC package and are specified over a temperature range of −40°C to +125°C. IL800 series are industry’s top-of-the-line isolators with the best specification within their class. They are manufactured with NVE’s patented IsoLoop® spintronic Giant Magnetoresistive (GMR) technology and featuring an internal refresher clock to ensure response to DC states of input within 9μs maximum. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

High speed, DC-correct digital isolator
Multidirectional three channel isolation
High speed at 110 Mbps typical
Isolation voltage of 2.5kV_rms
Working voltage of 600 V_rms per VDE V 0884-10
Temperature range of −40°C to +125°C
50 kV/μs typical (30 kV/μs minimum) common mode transient immunity
Internal refresher clock to ensure response to DC states of input within 9μs maximum
Typical quiescent current 0.0013A per channel
Typical pulse width distortion of 2ns (at 5V)
Channel to channel skew 3ns
Typical propagation delay of 10ns
Barrier life of 44000 years
Excellent magnetic immunity
VDE V 0884-10 certified; UL 1577 recognised
16-pin 0.3″ SOIC package

The NVE IL814TE series isolator provides a typical propagation delay of only 10ns and a pulse width distortion as low as 2ns, achieving the best specifications of any isolator. Typical transient immunity of 50 kV/µs is unsurpassed.

Typical applications for the IL800 series include:

Digital fieldbus
ADCs and DACs
Ground loop elimination
Multiplex data transmission
Board-to-board communication
Logic level shifting
RS-485 and RS-422
Digital noise reduction
Data interfaces
Peripheral interfaces
Parallel bus

The below table gives the recommended operating conditions of the NVE IL800 high speed digital isolator series including the IL814TE:

The post NVE IL814TE appeared first on Rhopoint Components.