High-Temperature Capacitors - Rhopoint Components

Jackcon Y1 HT 400VAC Capacitor Series

Admin — Mon, 23 Nov 2020 21:02:21 +0000

The Y1 400VAC high temperature ceramic disc capacitor series from Jackcon offers cost effective solution and compact package, while adhering to the majority of internationally recognised safety standards including UL E187963 (see datasheet for the full list). These AC capacitors feature capacitance between 10pF and 4.7nF and dielectric strength of 2600Vac. The available dielectric materials are Y5P or Y5U, dissipation factor of ≤2.5%, with tolerances of either ±10% (Y5P, Y5U) or ±20% (Y5U) and TCR values available either ±10% max (Y5P) or -56% to ±22% (Y5U). The operating temperature of Y1 capacitors is between -40°C and +125°C.

High temperature AC ceramic disc capacitors
Selection of dielectric materials offering range of properties – Y5P or Y5U
Available in capacitance ratings between 10pF and 4.7nF
Insulation resistance of at least 10,000MΩ min at 100Vdc over 1 minute
Dissipation factor of ≤2.5
Tolerances of ±10% (Y5P and Y5U models) or ±20% (Y5U model)
TCR ±10% max(Y5P), -56% max to +22%(Y5U)
Temperature range between -40°C and +125°C
Through-hole radial leaded capacitors

Typical applications for the Jackcon Y1 High Temperature (400VAC) disc ceramic capacitor series include:

Across-the-line applications
Coupling
Line by-pass

The below table gives the specification overview for each capacitor model available within the Y1 High Temperature (400VAC) capacitor series:

The reference test temperature is 25°C

The post Jackcon Y1 HT 400VAC Capacitor Series appeared first on Rhopoint Components.

Jackcon Y2 HT 300VAC Capacitor Series

Admin — Mon, 23 Nov 2020 21:02:21 +0000

The Y2 300VAC high temperature ceramic disc capacitor series from Jackcon offers cost effective solution and compact package, while adhering to the majority of internationally recognised safety standards including UL E187963 (see datasheet for the full list). These AC capacitors feature capacitance between 10pF and 4.7nF and dielectric strength of 2600Vac. The available dielectric materials are Y5P or Y5U, dissipation factor of ≤2.5%, with tolerances of either ±10% (Y5P, Y5U) or ±20% (Y5U) and the TCR options are either ±10% max (Y5P) or -56% to ±22% (Y5U). The operating temperature of Y2 capacitors is between -40°C and +125°C.

High temperature AC ceramic disc capacitors
Dielectric material properties either Y5P or Y5U
Available capacitance ratings between 10pF and 4.7nF
Insulation resistance of at least 10,000MΩ min at 100Vdc over 1 minute
Dissipation factor of ≤2.5
Tolerances of ±10% (Y5P and Y5U models) or ±20% (Y5U model)
TCR ±10% max (Y5P), -56% max to +22% (Y5U)
Temperature range between -40°C and +125°C
Through-hole radial leaded capacitors

Typical applications for the Jackcon Y2 high temperature (300VAC) disc ceramic capacitor series include:

Across-the-line applications
Coupling
Line by-pass

The below table gives the specification overview for each capacitor model available within the Y2 high temperature (300VAC) capacitor series:

The reference test temperature is 25°C

The post Jackcon Y2 HT 300VAC Capacitor Series appeared first on Rhopoint Components.

SRT Microcéramique High Temperature NP0 Capacitor Series

Admin — Mon, 23 Nov 2020 20:59:51 +0000

The High-Temperature NP0 (Type D03) low voltage, ultra-stable ceramic chip MLCC capacitor series from SRT Microcéramique offers a vast range of options to suit any demand, including capacitance between 0.47pF to 300nF across a range of chip sizes from 0402 to 2225, a wide selection of tolerances (±0.25pF, ±0.5pF, ±0.05%, ±0.1%, ±0.5%, ±1%. ±2%, ±5%, ±10%, ±20% and -20% to +80%), voltages (16V, 25V, 50V or 100V) and a wide range of terminations. As with all SRT-MC components, the NP0 capacitors are popular in safety-critical industries thanks to their excellent quality and reliability, as well as zero ageing rate up to 10000 hours, zero voltage coefficient of capacitance and change of capacitance with frequency, and very low-temperature coefficient of capacitance. The high-temperature NP0 models have operating temperature is between -55°C and +215°C.

High Temperature, low voltage, ultra-stable ceramic chip MLCC capacitors
Available in capacitance ratings between 0.47pF and 300nF
Available in standard chip sizes from 0402 to 2225
Dissipation factor under 10.10^-4 at 1V_rms and 1kH (or 1MHz)
Temperature coefficient of ±30ppm
Selection of Voltage ratings: 16V, 25V, 50V or 100V
Selection of tolerances: ±0.25pF, ±0.5pF, ±0.05%, ±0.1%, ±0.5%, ±1%. ±2%, ±5%, ±10%, ±20% and -20% to +80%
Temperature range between -55°C and +215°C

Termination options available include:

Palladium-Silver
Gold-plated Silver

While this capacitor series offers a large number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please contact us to discuss the custom solutions available.

Typical applications for the High-Temperature SRT-MC NP0 series of ceramic capacitors include:

Passing
Coupling
Filtering
Blocking
Applications where high stability of dielectric characteristics is required

The below table gives the specifications overview for each capacitor model available within the high-temperature NP0 series:

The post SRT Microcéramique High Temperature NP0 Capacitor Series appeared first on Rhopoint Components.

SRT Microcéramique High Temperature X7R Capacitor Series

Admin — Mon, 23 Nov 2020 20:59:51 +0000

The high temperature X7R low voltage, stable ceramic chip MLCC capacitor series from SRT Microcéramique offers a wide range of options to suit any demand, including capacitance between 1nF to 1.5µF across a range of chip sizes from 0402 to 1812, a selection of tolerances (±5%, ±10% or ±20%) and voltages (25V, 50V or 100V). These high-temperature capacitors are supplied with palladium-silver terminations as standard. As with all SRT-MC components, the X7R capacitors are popular in safety-critical industries thanks to their excellent quality and reliability. The operating temperature of the high-temperature X7R models is between -55°C and +225°C.

High temperature, low voltage ceramic chip MLCC capacitors
Available in capacitance ratings between 1nF and 1.5µF
Available in standard chip sizes from 0402 to 1812
Dissipation factor under 0.025
Temperature coefficient of ±15%, with 0Vdc applied
Selection of voltage ratings: 25V, 50V or 100V
Selection of tolerances: ±5%, ±10% and ±20%
Temperature range between -55°C and +225°C
Palladium-Silver terminations

While this capacitor series offers a number of options, customisation is possible on all SRT Microcéramique components – if none of the given options are suitable for your application, please contact us to discuss the custom solutions available.

The below table gives the specifications overview for each capacitor model available within the X7R HT series (25V-100V):

The post SRT Microcéramique High Temperature X7R Capacitor Series appeared first on Rhopoint Components.