• Ultra high precision wrap-around bulk foil chip resistor
• Available in any resistance between 5Ω and 8kΩ
• 0805 package
• Tolerances as low as ±0.01% over the resistance range of 250Ω up to 8kΩ
• TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
• Voltage rating 40V
• Power rating of 0.2W at +70°C
• Load life stability of 25ppm typical at 70°C, 2000h at rated power (50 ppm typical at 70°C, 10000h at rated power)
• Thermal stabilization time <1s (nominal value achieved within 10ppm of steady state value)
• Electrostatic discharge (EDS) of at least to 25kV
• Short time overload of ≤0.005% typical
• Rise time as low as 1ns, effectively no ringing
• Current noise of <0.010µV_RMS/V of applied voltage (<-40dB)
• Non-hot spot design
• Terminal finishes available: lead (Pb) free, tin/lead alloy

The FRSM Z1 ultra high precision resistor series is also available as EEE-INST-002 compliant for space use. Please see the separate FRSM EEE (space qualified) product pages for further information.

Non-standard technical requirements such as resistance outside of standard range, lower tolerance or TCR are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the FRSM0805 series:

⁽¹⁾ For tighter TCR and/or resistance values up to 150k, please contact Application Engineering.

 

The post VFR FRSM0805 Series appeared first on Rhopoint Components.

• Ultra high precision wrap-around bulk foil chip resistor
• Available in any resistance between 5Ω and 25kΩ
• 1206 package
• Tolerances as low as ±0.01% over the resistance range of 250Ω up to 25kΩ
• TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
• Voltage rating 87V
• Power rating of 0.3W at +70°C
• Load life stability of 25ppm typical at 70°C, 2000h at rated power (50 ppm typical at 70°C, 10000h at rated power)
• Thermal stabilization time <1s (nominal value achieved within 10ppm of steady state value)
• Electrostatic discharge (EDS) of at least to 25kV
• Short time overload of ≤0.005% typical
• Rise time as low as 1ns, effectively no ringing
• Current noise of <0.010µV_RMS/V of applied voltage (<-40dB)
• Non-hot spot design
• Terminal finishes available: lead (Pb) free, tin/lead alloy

The FRSM Z1 ultra high precision resistor series is also available as EEE-INST-002 compliant for space use. Please see the separate FRSM EEE (space qualified) product pages for further information.

Non-standard technical requirements such as resistance outside of standard range, lower tolerance or TCR are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the FRSM1206 series:

⁽¹⁾ For tighter TCR and/or resistance values up to 150k, please contact Application Engineering.

 

The post VFR FRSM1206 Series appeared first on Rhopoint Components.

• Ultra high precision wrap-around bulk foil chip resistor
• Available in any resistance between 5Ω and 30kΩ
• 1506 package
• Tolerances as low as ±0.01% over the resistance range of 250Ω up to 30kΩ
• TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
• Voltage rating 95V
• Power rating of 0.3W at +70°C
• Load life stability of 25ppm typical at 70°C, 2000h at rated power (50 ppm typical at 70°C, 10000h at rated power)
• Thermal stabilization time <1s (nominal value achieved within 10ppm of steady state value)
• Electrostatic discharge (EDS) of at least to 25kV
• Short time overload of ≤0.005% typical
• Rise time as low as 1ns, effectively no ringing
• Current noise of <0.010µV_RMS/V of applied voltage (<-40dB)
• Non-hot spot design
• Terminal finishes available: lead (Pb) free, tin/lead alloy

The FRSM Z1 ultra high precision resistor series is also available as EEE-INST-002 compliant for space use. Please see the separate FRSM EEE (space qualified) product pages for further information.

Non-standard technical requirements such as resistance outside of standard range, lower tolerance or TCR are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the FRSM1506 series:

⁽¹⁾ For tighter TCR and/or resistance values up to 150k, please contact Application Engineering.

 

The post VFR FRSM1506 Series appeared first on Rhopoint Components.

• Ultra high precision wrap-around bulk foil chip resistor
• Available in any resistance between 5Ω and 70kΩ
• 2010 package
• Tolerances as low as ±0.01% over the resistance range of 250Ω up to 70kΩ
• TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
• Voltage rating 187V
• Power rating of 0.5W at +70°C
• Load life stability of 25ppm typical at 70°C, 2000h at rated power (50 ppm typical at 70°C, 10000h at rated power)
• Thermal stabilization time <1s (nominal value achieved within 10ppm of steady state value)
• Electrostatic discharge (EDS) of at least to 25kV
• Short time overload of ≤0.005% typical
• Rise time as low as 1ns, effectively no ringing
• Current noise of <0.010µV_RMS/V of applied voltage (<-40dB)
• Non-hot spot design
• Terminal finishes available: lead (Pb) free, tin/lead alloy

The FRSM Z1 ultra high precision resistor series is also available as EEE-INST-002 compliant for space use. Please see the separate FRSM EEE (space qualified) product pages for further information.

Non-standard technical requirements such as resistance outside of standard range, lower tolerance or TCR are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the FRSM2010 series:

⁽¹⁾ For tighter TCR and/or resistance values up to 150k, please contact Application Engineering. 

The post VFR FRSM2010 Series appeared first on Rhopoint Components.

• Ultra high precision wrap-around bulk foil chip resistor
• Available in any resistance between 5Ω and 125kΩ
• 2512 package
• Tolerances as low as ±0.01% over the resistance range of 250Ω up to 125kΩ
• TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
• Voltage rating 220V
• Power rating of 0.75W at +70°C
• Load life stability of 25ppm typical at 70°C, 2000h at rated power (50 ppm typical at 70°C, 10000h at rated power)
• Thermal stabilization time <1s (nominal value achieved within 10ppm of steady state value)
• Electrostatic discharge (EDS) of at least to 25kV
• Short time overload of ≤0.005% typical
• Rise time as low as 1ns, effectively no ringing
• Current noise of <0.010µV_RMS/V of applied voltage (<-40dB)
• Non-hot spot design
• Terminal finishes available: lead (Pb) free, tin/lead alloy

The FRSM Z1 ultra high precision resistor series is also available as EEE-INST-002 compliant for space use. Please see the separate FRSM EEE (space qualified) product pages for further information.

Non-standard technical requirements such as resistance outside of standard range, lower tolerance or TCR are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the FRSM2512 series:

⁽¹⁾ For tighter TCR and/or resistance values up to 150k, please contact Application Engineering.

 

The post VFR FRSM2512 Series appeared first on Rhopoint Components.

• Ultra-high precision wrap-around bulk foil chip resistor
• EEE-INST-002 and MIL-PRF-55342 tested for space and military applications
• Available in any resistance between 100Ω and 2kΩ
• 0603 package
• Tolerances as low as ±0.01% over the resistance range of 250Ω up to 2kΩ
• Power coefficient “ΔR due to self-heating” of 5ppm at rated power
• TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
• Voltage rating 14V
• Power rating of 0.05W at +70°C
• Load life stability of ±0.02% after 2000h at 70°C at rated power
• Thermal stabilization time <1s (nominal value achieved within 10ppm of steady-state value)
• Electrostatic discharge (EDS) of at least to 25kV
• Short time overload of ≤0.005% typical
• Rise time as low as 1ns, effectively no ringing
• Current noise of <0.010µV_RMS/V of applied voltage (<-40dB)
• Non-hot spot design
• Terminal finishes available: tin/lead alloy

Non-standard technical requirements such as resistance outside of the standard range, higher temperature application up to 240°C or better performance characteristics are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the 303261 series:

The post VFR FRSM 303261 Series appeared first on Rhopoint Components.

• Ultra-high precision wrap-around bulk foil chip resistor
• EEE-INST-002 and MIL-PRF-55342 tested for space and military applications
• Available in any resistance between 10Ω and 5kΩ
• 0805 package
• Tolerances as low as ±0.01% over the resistance range of 250Ω up to 5kΩ
• Power coefficient “ΔR due to self-heating” of 5ppm at rated power
• TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
• Voltage rating 22V
• Power rating of 0.1W at +70°C
• Load life stability of ±0.02% after 2000h at 70°C at rated power
• Thermal stabilization time <1s (nominal value achieved within 10ppm of steady-state value)
• Electrostatic discharge (EDS) of at least to 25kV
• Short time overload of ≤0.005% typical
• Rise time as low as 1ns, effectively no ringing
• Current noise of <0.010µV_RMS/V of applied voltage (<-40dB)
• Non-hot spot design
• Terminal finishes available: tin/lead alloy

Non-standard technical requirements such as resistance outside of the standard range, higher temperature application up to 240°C or better performance characteristics are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the 303262 series:

The post VFR FRSM 303262 Series appeared first on Rhopoint Components.

• Ultra high precision wrap-around bulk foil chip resistor
• EEE-INST-002 and MIL-PRF-55342 tested for space and military applications
• Available in any resistance between 10Ω and 14kΩ
• 1206 package
• Tolerances as low as ±0.01% over the resistance range of 250Ω up to 14kΩ
• Power coefficient “ΔR due to self heating” of 5ppm at rated power
• TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
• Voltage rating 46V
• Power rating of 0.15W at +70°C
• Load life stability of ±0.02% after 2000h at 70°C at rated power
• Thermal stabilization time <1s (nominal value achieved within 10ppm of steady state value)
• Electrostatic discharge (EDS) of at least to 25kV
• Short time overload of ≤0.005% typical
• Rise time as low as 1ns, effectively no ringing
• Current noise of <0.010µV_RMS/V of applied voltage (<-40dB)
• Non-hot spot design
• Terminal finishes available: tin/lead alloy

Non-standard technical requirements such as resistance outside of standard range, higher temperature application up to 240°C or better performance characteristics are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the 303263 series:

The post VFR FRSM 303263 Series appeared first on Rhopoint Components.

• Ultra high precision wrap-around bulk foil chip resistor
• EEE-INST-002 and MIL-PRF-55342 tested for space and military applications
• Available in any resistance between 10Ω and 16kΩ
• 1506 package
• Tolerances as low as ±0.01% over the resistance range of 250Ω up to 16kΩ
• Power coefficient “ΔR due to self heating” of 5ppm at rated power
• TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
• Voltage rating 57V
• Power rating of 0.2W at +70°C
• Load life stability of ±0.02% after 2000h at 70°C at rated power
• Thermal stabilization time <1s (nominal value achieved within 10ppm of steady state value)
• Electrostatic discharge (EDS) of at least to 25kV
• Short time overload of ≤0.005% typical
• Rise time as low as 1ns, effectively no ringing
• Current noise of <0.010µV_RMS/V of applied voltage (<-40dB)
• Non-hot spot design
• Terminal finishes available: tin/lead alloy

Non-standard technical requirements such as resistance outside of standard range, higher temperature application up to 240°C or better performance characteristics are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the 303264 series:

The post VFR FRSM 303264 Series appeared first on Rhopoint Components.

• Ultra high precision wrap-around bulk foil chip resistor
• EEE-INST-002 and MIL-PRF-55342 tested for space and military applications
• Available in any resistance between 10Ω and 35kΩ
• 2010 package
• Tolerances as low as ±0.01% over the resistance range of 250Ω up to 35kΩ
• Power coefficient “ΔR due to self heating” of 5ppm at rated power
• TCR as low as ±0.2ppm/°C between -55° and +125°C, +25°C ref.
• Voltage rating 102V
• Power rating of 0.3W at +70°C
• Load life stability of ±0.02% after 2000h at 70°C at rated power
• Thermal stabilization time <1s (nominal value achieved within 10ppm of steady state value)
• Electrostatic discharge (EDS) of at least to 25kV
• Short time overload of ≤0.005% typical
• Rise time as low as 1ns, effectively no ringing
• Current noise of <0.010µV_RMS/V of applied voltage (<-40dB)
• Non-hot spot design
• Terminal finishes available: tin/lead alloy

Non-standard technical requirements such as resistance outside of standard range, higher temperature application up to 240°C or better performance characteristics are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the 303265 series:

The post VFR FRSM 303265 Series appeared first on Rhopoint Components.