Riedon Inc - Resistor Solutions - Rhopoint Components

Riedon 106 Series

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The 106 wirewound precision resistor series from Riedon offers resistance values between 700kΩ and 6MΩ (lower resistances available upon request) at a power rating of 1W, tolerances as low as ±0.005% and a standard TCR of ±10 ppm/°C (wide TCR range, including Balco & Platinum wire for high TCR, available upon request). These resistors utilise a traditional design for through-hole circuit board mounting, while offering a number of custom features. The 106 series resistors are all 100% acceptance tested and traceable to NIST, and offer long term stability of 100ppm/year (20ppm/year version available). Matched resistance sets to ±0.001% and ±0.5ppm/°C are also available.

Wirewound, precision, axial through-hole resistor
Available in resistance values between 700kΩ and 6MΩ (lower resistances available upon request)
Minimum tolerance ±0.005%
Standard TCR of ±10 ppm/°C (wide TCR range of -20ppm/°C to +6000ppm/°C available upon request)
Standard long term stability of 100ppm/year, with high stability version (±20ppm/year) available upon request
Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
100% acceptance tested / traceable to NIST
Power rating of 1W
Maximum working voltage 800V
Matched resistance sets to ±0.001% and ±0.5ppm/°C available
Temperature range -55°C to +145°C

Please see below for the power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon 100 series wirewound resistor range, including the 106 series:

The post Riedon 106 Series appeared first on Rhopoint Components.

Riedon 129 Series

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The 129 wirewound precision resistor series from Riedon offers resistance values between 700kΩ and 6MΩ (lower resistances available upon request) at a power rating of 0.75W, tolerances as low as ±0.005% and a standard TCR of ±10 ppm/°C (wide TCR range, including Balco & Platinum wire for high TCR, available upon request). These resistors use a traditional design for through-hole circuit board mounting, while offering a number of custom features. The 129 series resistors are all 100% acceptance tested and traceable to NIST, and offer long term stability of 100 ppm/year (20 ppm/year version available). Matched resistance sets to ±0.001% and ±0.5 ppm/°C are also available.

Wirewound, precision, axial through-hole resistor
Available in resistance values between 700kΩ and 6MΩ (lower resistances available upon request)
Minimum tolerance ±0.005%
Standard TCR of ±10 ppm/°C (wide TCR range of -20 ppm/°C to +6000 ppm/°C available upon request)
Standard long term stability of 100 ppm/year, with high stability version (±20 ppm/year) available upon request
Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
100% acceptance tested / traceable to NIST
Power rating of 0.75W
Maximum working voltage 600V
Matched resistance sets to ±0.001% and ±0.5 ppm/°C available
Temperature range -55°C to +145°C

Please see below the Power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon 100 series wirewound resistor range, including the 129 series:

The post Riedon 129 Series appeared first on Rhopoint Components.

Riedon 121 Series

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The 121 wirewound precision resistor series from Riedon offers resistance values between 700kΩ up to 3.8MΩ (lower resistances available upon request) at a power rating of 0.5W, tolerances as low as ±0.005% and a standard TCR of ±10 ppm/°C (wide TCR range, including Balco & Platinum wire for high TCR, available upon request). These resistors use a traditional design for through-hole circuit board mounting, while offering a number of custom features. The 121 series resistors are all 100% acceptance tested and tracable to NIST, and offer long term stability of 100ppm/year (20 ppm/year version available). Matched resistance sets to ±0.001% and ±0.5 ppm/°C are also available.

Wirewound, precision, axial through-hole resistor
Available in resistance values between 700kΩ and 3.8MΩ (lower resistances available upon request)
Minimum tolerance ±0.005%
Standard TCR of ±10 ppm/°C (wide TCR range of -20 ppm/°C to +6000 ppm/°C available upon request)
Standard long term stability of 100 ppm/year, with high stability version (±20 ppm/year) available upon request
Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
100% acceptance tested / traceable to NIST
Power rating of 0.5W
Maximum working voltage 400V
Matched resistance sets to ±0.001% and ±0.5ppm/°C available
Temperature range -55°C to +145°C

Please see below for the power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon 100/SM/PC wirewound resistor range, including the 121 series:

The post Riedon 121 Series appeared first on Rhopoint Components.

Riedon RSN Series

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The RSN series of base-mounted DC ammeter/busbar shunts from Riedon offer current ratings from 1A up to 500A with outputs of 0.05V, 0.1V or custom options. They utilise a Manganin® resistive element to achieve low resistance values ranging from 100µΩ at 500A to 0.05Ω at 1A (for 50mV Output) and have a standard tolerance of ±0.1%.

Base mounted shunt
Manganin® resistive element
0.05V output available in select resistance values between 100µΩ and 0.05Ω
0.1V output available in select resistance values between 200µΩ and 0.1Ω
Current rating from 1A to 500A
Standard tolerance of ±0.1%
Calibration certificate available
Temperature range +30°C to +70°C

Riedon RSN series base mounted shunts cover the following applications:

Power supply
Power conversions
Current measurements

The below table gives the full specifications for each resistor model available in the Riedon RSN base mounted shunt series:

The post Riedon RSN Series appeared first on Rhopoint Components.

Riedon 104PC Series

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The 104PC wirewound precision resistor series from Riedon offers resistance values between 700kΩ and 1MΩ (lower resistances available upon request) at a power rating of 0.5W, tolerances as low as ±0.005% and a standard TCR of ±10 ppm/°C (wide TCR range, including Balco and Platinum wire for high TCR, available upon request). These resistors utilise a traditional design for through-hole circuit board mounting, while offering a number of custom features. The 104PC series resistors are all 100% acceptance tested and traceable to NIST, and offer long term stability of 100ppm/year (20ppm/year version available). Matched resistance sets to ±0.001% and ±0.5ppm/°C are also available.

Wirewound, precision, radial through-hole resistor
Available in resistance values between 700kΩ and 1MΩ (lower resistances available upon request)
Minimum tolerance ±0.005%
Standard TCR of 10ppm/°C (wide TCR range of -20ppm/°C to +6000ppm/°C available upon request)
Standard long term stability of 100ppm/year, with high stability version (±20ppm/year) available upon request
Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
100% acceptance tested / traceable to NIST
Power rating of 0.5W
Maximum working voltage 400V
Matched resistance sets to ±0.001% and ±0.5ppm/°C available
Temperature range -55°C to +145°C

Please see below for the power derating curve for the Riedon 104PC series:

The below table gives the full specifications for each resistor model available in the Riedon PC series wirewound resistor range, including the 104PC series:

The post Riedon 104PC Series appeared first on Rhopoint Components.

Riedon 120PC Series

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The 120PC wirewound precision resistor series from Riedon offers resistance values between 700kΩ and 800kΩ (lower resistances available upon request) at a power rating of 0.4W, tolerances as low as ±0.005% and a standard TCR of ±10 ppm/°C (wide TCR range, including Balco and Platinum wire for high TCR, available upon request). These resistors use a traditional design for through-hole circuit board mounting, while offering a number of custom features. The 120PC series resistors are all 100% acceptance tested and tracable to NIST, and offer long term stability of 100 ppm/year (20 ppm/year version available). Matched resistance sets to ±0.001% and ±0.5 ppm/°C are also available.

Wirewound, precision, radial through-hole resistor
Available in resistance values between 700kΩ and 800kΩ (lower resistances available upon request)
Minimum tolerance ±0.005%
Standard TCR of ±10ppm/°C (wide TCR range of -20 ppm/°C to +6000 ppm/°C available upon request)
Standard long term stability of 100 ppm/year, with high stability version (±20 ppm/year) available upon request
Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
100% acceptance tested / traceable to NIST
Power rating of 0.4W
Maximum working voltage 300V
Matched resistance sets to ±0.001% and ±0.5ppm/°C available
Temperature range -55°C to +145°C

Please see below for the power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon PC series wirewound resistor range, including the 120PC series:

The post Riedon 120PC Series appeared first on Rhopoint Components.

Riedon 108 Series

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The 108 wirewound precision resistor series from Riedon offers resistance values between 700kΩ and 6MΩ (lower resistances available upon request) at a power rating of 2W, tolerances as low as ±0.005% and a standard TCR of ±10 ppm/°C (wide TCR range, including Balco and Platinum wire for high TCR, available upon request). These resistors use a traditional design for through-hole circuit board mounting, while offering a number of custom features. The 108 series resistors are all 100% acceptance tested and traceable to NIST, and offer long term stability of 100ppm/year (20ppm/year version available). Matched resistance sets to ±0.001% and ±0.5ppm/°C are also available.

Wirewound, precision, axial through-hole resistor
Available in resistance values between 700kΩ and 6MΩ (lower resistances available upon request)
Minimum tolerance ±0.005%
Standard TCR of ±10 ppm/°C (wide TCR range of -20 ppm/°C to +6000 ppm/°C available upon request)
Standard long term stability of 100 ppm/year, with high stability version (±20 ppm/year) available upon request
Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
100% acceptance tested / traceable to NIST
Power rating of 2W
Maximum working voltage 1000V
Matched resistance sets to ±0.001% and ±0.5ppm/°C available
Temperature range -55°C to +145°C

Please see below the Power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon 100 series wirewound resistor range, including the 108 series:

The post Riedon 108 Series appeared first on Rhopoint Components.

Riedon 107 Series

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The 107 wirewound precision resistor series from Riedon offers resistance values between 700kΩ and 6MΩ (lower resistances available upon request) at a power rating of 1.5W, tolerances as low as ±0.005% and a standard TCR of ±10 ppm/°C (wide TCR range, including Balco and Platinum wire for high TCR, available upon request). These resistors utilise a traditional design for through-hole circuit board mounting, while offering a number of custom features. The 107 series resistors are all 100% acceptance tested and traceable to NIST, and offer long term stability of 100ppm/year (20ppm/year version available). Matched resistance sets to ±0.001% and ±0.5ppm/°C are also available.

Wirewound, precision, axial through-hole resistor
Available in resistance values between 700kΩ and 6MΩ (lower resistances available upon request)
Minimum tolerance ±0.005%
Standard TCR of ±10 ppm/°C (wide TCR range of -20ppm/°C to +6000ppm/°C available upon request)
Standard long term stability of 100 ppm/year, with high stability version (±20ppm/year) available upon request
Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
100% acceptance tested / traceable to NIST
Power rating of 1.5W
Maximum working voltage 900V
Matched resistance sets to ±0.001% and ±0.5ppm/°C available
Temperature range -55°C to +145°C

Please see below for the power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon 100 series wirewound resistor range, including the 107 series:

The post Riedon 107 Series appeared first on Rhopoint Components.

Riedon 120 Series

Admin — Mon, 23 Nov 2020 20:45:20 +0000

The 120 wirewound precision resistor series from Riedon offers resistance values between 700kΩ and 3.8MΩ (lower resistances available upon request) at a power rating of 0.4W, tolerances as low as ±0.005% and a standard TCR of ±10 ppm/°C (wide TCR range, including Balco & Platinum wire for high TCR, available upon request). These resistors use a traditional design for through-hole circuit board mounting, while offering number of custom features. The 120 series resistors are all 100% acceptance tested and traceable to NIST, and offer long term stability of 100ppm/year (20ppm/year version available). Matched resistance sets to ±0.001% and ±0.5 ppm/°C are also available.

Wirewound, precision, axial through-hole resistor
Available in resistance values between 700kΩ and 3.8MΩ (lower resistances available upon request)
Minimum tolerance ±0.005%
Standard TCR of ±10 ppm/°C (wide TCR range of -20 ppm/°C to +6000 ppm/°C available upon request)
Standard long term stability of 100 ppm/year, with high stability version (±20 ppm/year) available upon request
Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
100% acceptance tested / traceable to NIST
Power rating of 0.4W
Maximum working voltage 300V
Matched resistance sets to ±0.001% and ±0.5ppm/°C available
Temperature range -55°C to +145°C

Please see below for the power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon 100 series wirewound resistor range, including the 120 series:

The post Riedon 120 Series appeared first on Rhopoint Components.

Riedon 102 Series

Admin — Mon, 23 Nov 2020 20:44:02 +0000

The 102 wirewound precision resistor series from Riedon offers resistance values between 700kΩ and 2.5MΩ (lower resistances available upon request) at a power rating of 0.33W, tolerances as low as ±0.005% and a standard TCR of ±10ppm/°C (wide TCR range, including Balco & Platinum wire for high TCR, available upon request). These resistors utilise a traditional design for through-hole circuit board mounting, while offering a number of custom features. The 102 series resistors are all 100% acceptance tested and traceable to NIST, and offer long term stability of 100ppm/year (20ppm/year version available). Matched resistance sets to ±0.001% and ±0.5ppm/°C are also available.

Wirewound, precision, axial through-hole resistor
Available in resistance values between 700kΩ and 2.5MΩ (lower resistances available upon request)
Minimum tolerance ±0.005%
Standard TCR of ±10 ppm/°C (wide TCR range of -20ppm/°C to +6000ppm/°C available upon request)
Standard long term stability of 100ppm/year, with high stability version (±20ppm/year) available upon request
Fast rise time version with low reactance design for fast rise time and extended frequency response available upon request
100% acceptance tested / traceable to NIST
Power rating of 0.33W
Maximum working voltage 400V
Matched resistance sets to ±0.001% and ±0.5ppm/°C available
Temperature range -55°C to +145°C

Please see below for the power derating curve for the Riedon 100/SM/PC series:

The below table gives the full specifications for each resistor model available in the Riedon 100 series wirewound resistor range, including the 102 series:

The post Riedon 102 Series appeared first on Rhopoint Components.