General Resistance - Rhopoint Components https://www.rhopointcomponents.com/manufacturers/general-resistance/ Electronic Components, Sensors, Connectors & Enclosures Thu, 28 Nov 2024 23:01:45 +0000 en-GB hourly 1 https://www.rhopointcomponents.com/wp-content/uploads/2020/09/cropped-rc-marble-100x100.png General Resistance - Rhopoint Components https://www.rhopointcomponents.com/manufacturers/general-resistance/ 32 32 General Resistance GG102 Squaristor Series https://www.rhopointcomponents.com/product/components/resistors/precision-ultra-precision-resistors/general-resistance-gg102-squaristor-series/ Thu, 10 Jun 2021 09:47:57 +0000 https://components.rhopoint.com/product/general-resistance-gg102-squaristor-series/
  • Wirewound radial leaded precision resistor
  • Resistance range from 10Ω up to 200kΩ
  • Tight tolerances of ±0.01% and ±0.1%
  • TCR of ±5 ppm/°C
  • Power rating up to 0.3W (GG102D Model)
  • Temperature range from -55°C up to +160°C

    • The post General Resistance GG102 Squaristor Series appeared first on Rhopoint Components.

    ]]>     The GG102 Squaristor radial wirewound resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The GG102 Squaristor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the GG102 Squaristor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C to +125°C).

    • Wirewound radial leaded precision resistor
    • Available in any resistance between 10Ω and 200kΩ including custom values
    • Small radial leaded through-hole package
    • Wire gauge of 22AWG (0.6mm)
    • Excellent stability of ±35ppm/yr
    • Noise levels so small they are immeasurable
    • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
    • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
    • Maximum working voltage of 150V
    • Power rating of 0.3W (±0.1%) and ≈0.18W (±0.01%) at +85°C
    • Maximum rated operating temperature +85°C
    • Temperature range from -55°C up to +160°C

     

    The GG102 Squaristor radial wirewound resistor series offers ultra-precision in a small compact radial leaded through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

    Any custom resistance value between 10Ω and 200kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts (30 pc minimum order quantity for standard parts, where they are not stocked).

     

    General Resistance GG102 / GR102 Squaristor Series Specification Table

    AttributesValue
    Resistance value10Ω to 200kΩ
    Tolerance±0.01% / ±0.1%
    TCR±5ppm/°C (-55 to +125°C)
    Temperature range-55°C to +160°C
    Power rating *0.3W (±0.1%) / 0.18W (±0.01%)
    Maximum Voltage150VDC (or AC peak)
    Dielectric Withstanding Voltage1000Vrms (typical)
    Stability±35ppm/yr.
    Wire Gauge **22 AWG / 0.6mm

    * For other tolerances, please contact us
    ** All leads are tinned copper

    The General Resistance ultra-precision wirewound resistor series has been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

    The post General Resistance GG102 Squaristor Series appeared first on Rhopoint Components.

    ]]>         General Resistance 5E10 Mini-Ohm Series https://www.rhopointcomponents.com/product/components/resistors/precision-ultra-precision-resistors/general-resistance-5e10-mini-ohm-series/ Wed, 09 Jun 2021 07:52:50 +0000 https://components.rhopoint.com/product/general-resistance-5e10-mini-ohm-series/
  • Wirewound axial leaded precision resistor
  • Resistance range from 10Ω up to 200kΩ
  • Tight tolerances of ±0.01% and ±0.1%
  • TCR of ±5 ppm/°C
  • Power rating up to 0.2W (5E10D model)
  • Temperature range from -55°C up to +160°C

    • The post General Resistance 5E10 Mini-Ohm Series appeared first on Rhopoint Components.

    ]]>     The 5E10 Mini-Ohm axial wirewound precision resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The 5E10 Mini-Ohm series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 5E10 Mini-Ohm series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

    • Wirewound axial leaded precision resistor
    • Available in any resistance between 10Ω and 200kΩ
    • Stocked in many standard resistance values here at Rhopoint Components
    • Small axial leaded through-hole package
    • Excellent stability of ±50ppm/yr
    • Noise levels so small they are immeasurable
    • Wire gauge of 24AWG (0.4mm)
    • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
    • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
    • Maximum working voltage of 175V
    • Power rating of 0.2W (±0.1%) and 0.125W (±0.01%) at +85°C
    • Maximum rated operating temperature +85°C
    • Temperature range from -55°C up to +160°C

     

    The 5E10 Mini-Ohm axial wirewound precision resistor series offers ultra-precision in a small compact through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

    Any custom resistance value between 10Ω and 200kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts (30 pc minimum order quantity for standard parts, where they are not stocked).

     

    General Resistance 5G10 / 5E10 Mini-Ohm Series Specification Table

    AttributesValue
    Resistance value10Ω to 200kΩ
    Tolerance±0.01% / ±0.1%
    TCR±5ppm/°C (-55 to +125°C)
    Temperature range-55°C to +160°C
    Power rating *0.2W (±0.1%) / 0.125W (±0.01%)
    Maximum Voltage175VDC (or AC peak)
    Dielectric Withstanding Voltage1000Vrms (typical)
    Stability±50ppm/yr.
    Wire Gauge **24 AWG / 0.4mm

    * For other tolerances, please contact us
    ** All leads are tinned copper

    The General Resistance ultra-precision wirewound axial leaded resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

    The post General Resistance 5E10 Mini-Ohm Series appeared first on Rhopoint Components.

    ]]>         General Resistance 8E16 Econistor Series https://www.rhopointcomponents.com/product/components/resistors/precision-ultra-precision-resistors/general-resistance-8e16-econistor-series/ Thu, 27 May 2021 08:02:45 +0000 https://components.rhopoint.com/product/general-resistance-8e16-econistor-series/
  • Wirewound axial leaded precision resistor
  • Resistance range from 1Ω up to 699kΩ
  • Tight tolerances of ±0.01% and ±0.1%
  • TCR of ±5 ppm/°C
  • Power rating up to 0.33W (8E16D model)
  • Temperature range from -55°C up to +160°C

    • The post General Resistance 8E16 Econistor Series appeared first on Rhopoint Components.

    ]]>     The 8E16 Econistor axial wirewound precision resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 1Ω up to 699kΩ. The 8E16 Econistor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 8E16 Econistor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

    • Wirewound axial leaded precision resistor
    • Available in any resistance between 1Ω and 699kΩ including custom values
    • Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
    • Wire gauge of 20AWG (0.6mm)
    • Excellent stability of ±35ppm/yr
    • Noise levels so small they are immeasurable
    • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
    • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
    • Maximum working voltage of 200V
    • Power rating of 0.33W (±0.1%) and ≈0.2W (±0.01%) at +85°C
    • Maximum rated operating temperature +85°C
    • Temperature range from -55°C up to +160°C

     

    The 8E16 Econistor axial wirewound precision resistor series is the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

    Any custom resistance value between 1Ω and 699kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts, including additional RTD simulation values that are not standard stocked items (30 pc minimum order quantity for standard parts, where they are not stocked).

     

    General Resistance 8G16 / 8E16 Econistor Series Specification Table

    AttributesValue
    Resistance value1Ω to 699kΩ
    Tolerance *±0.01% / ±0.1%
    TCR±5ppm/°C (-55 to +125°C)
    Temperature range-55°C to +160°C
    Power rating0.33W (±0.1%) / 0.2W (±0.01%)
    Maximum Voltage200VDC (or AC peak)
    Dielectric Withstanding Voltage1000Vrms (typical)
    Stability±35ppm/yr.
    Wire Gauge **22 AWG / 0.6mm

    * For other tolerances, please contact us
    ** All leads are tinned copper

    The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

    The post General Resistance 8E16 Econistor Series appeared first on Rhopoint Components.

    ]]>         General Resistance 8G16 Econistor Series https://www.rhopointcomponents.com/product/components/resistors/precision-ultra-precision-resistors/general-resistance-8g16-econistor-series/ Wed, 19 May 2021 19:45:15 +0000 https://components.rhopoint.com/product/general-resistance-8g16-econistor-series/
  • Wirewound axial leaded precision resistor
  • Resistance range from 1Ω up to 699kΩ
  • Tight tolerances of ±0.01% and ±0.1%
  • TCR of ±5 ppm/°C
  • Power rating from 0.33W (8G16D model)
  • Temperature range from -55°C up to +160°C

    • The post General Resistance 8G16 Econistor Series appeared first on Rhopoint Components.

    ]]>     The 8G16 Econistor axial wirewound precision resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 1Ω up to 699kΩ. The 8G16 Econistor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 8G16 Econistor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

    • Wirewound axial leaded precision resistor
    • Available in any resistance between 1Ω and 699kΩ including custom values
    • Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
    • Wire gauge of 20AWG (0.6mm)
    • Excellent stability of ±35ppm/yr
    • Noise levels so small they are immeasurable
    • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
    • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
    • Maximum working voltage of 200V
    • Power rating of 0.33W (±0.1%) and ≈0.2W (±0.01%) at +85°C
    • Maximum rated operating temperature +85°C
    • Temperature range from -55°C up to +160°C

     

    The 8G16 Econistor axial wirewound precision resistor series is the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

    Any custom resistance value between 1Ω and 699kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts, including additional RTD simulation values that are not standard stocked items (30 pc minimum order quantity for standard parts, where they are not stocked).

     

    General Resistance 8G16 / 8E16 Econistor Series Specification Table

    AttributesValue
    Resistance value1Ω to 699kΩ
    Tolerance *±0.01% / ±0.1%
    TCR±5ppm/°C (-55 to +125°C)
    Temperature range-55°C to +160°C
    Power rating0.33W (±0.1%) / 0.2W (±0.01%)
    Maximum Voltage200VDC (or AC peak)
    Dielectric Withstanding Voltage1000Vrms (typical)
    Stability±35ppm/yr.
    Wire Gauge **22 AWG / 0.6mm

    * For other tolerances, please contact us
    ** All leads are tinned copper

     

    The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

    The post General Resistance 8G16 Econistor Series appeared first on Rhopoint Components.

    ]]>         General Resistance 5G10 Mini-Ohm Series https://www.rhopointcomponents.com/product/components/resistors/precision-ultra-precision-resistors/general-resistance-5g10-mini-ohm-series/ Mon, 23 Nov 2020 20:00:13 +0000 https://components.rhopoint.com/product/general-resistance-5g10-mini-ohm-series/
  • Wirewound axial leaded precision resistor
  • Resistance range from 10Ω up to 200kΩ
  • Tight tolerances of ±0.01% and ±0.1%
  • TCR of ±5 ppm/°C
  • Power rating up to 0.2W (5G10D model)
  • Temperature range from -55°C up to +160°C

    • The post General Resistance 5G10 Mini-Ohm Series appeared first on Rhopoint Components.

    ]]>     The 5G10 Mini-Ohm axial wirewound precision resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The 5G10 Mini-Ohm series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 5G10 Mini-Ohm series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

    • Wirewound axial leaded precision resistor
    • Available in any resistance between 10Ω and 200kΩ including custom values
    • Stocked in many standard resistance values here at Rhopoint Components
    • Small axial leaded through-hole package
    • Excellent stability of ±50ppm/yr
    • Noise levels so small they are immeasurable
    • Wire gauge of 24AWG (0.4mm)
    • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
    • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
    • Maximum working voltage of 175V
    • Power rating of 0.2W (±0.1%) and 0.125W (±0.01%) at +85°C)
    • Maximum rated operating temperature +85°C
    • Temperature range from -55°C up to +160°C

     

    5G10 Mini-Ohm axial wirewound precision resistor series offers ultra-precision in a small compact through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

    Any custom resistance value between 10Ω and 200kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts (30 pc minimum order quantity for standard parts, where they are not stocked).

     

    General Resistance 5G10 / 5E10 Mini-Ohm Series Specification Table

    AttributesValue
    Resistance value10Ω to 200kΩ
    Tolerance±0.01% / ±0.1%
    TCR±5ppm/°C (-55 to +125°C)
    Temperature range-55°C to +160°C
    Power rating *0.2W (±0.1%) / 0.125W (±0.01%)
    Maximum Voltage175VDC (or AC peak)
    Dielectric Withstanding Voltage1000Vrms (typical)
    Stability±50ppm/yr.
    Wire Gauge **24 AWG / 0.4mm

    * For other tolerances, please contact us
    ** All leads are tinned copper

    The General Resistance ultra-precision wirewound axial leaded resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

    The post General Resistance 5G10 Mini-Ohm Series appeared first on Rhopoint Components.

    ]]>         General Resistance GR102 Squaristor Series https://www.rhopointcomponents.com/product/components/resistors/precision-ultra-precision-resistors/general-resistance-gr102-squaristor-series/ Mon, 23 Nov 2020 20:00:13 +0000 https://components.rhopoint.com/product/general-resistance-gr102-squaristor-series/
  • Wirewound radial leaded precision resistor
  • Resistance range from 10Ω up to 200kΩ
  • Tight tolerances of ±0.01% and ±0.1%
  • TCR of ±5 ppm/°C
  • Power rating up to 0.3W (GR102D model)
  • Temperature range from -55°C up to +160°C

    • The post General Resistance GR102 Squaristor Series appeared first on Rhopoint Components.

    ]]>     The GR102 Squaristor radial wirewound precision resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The GR102 Squaristor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the GR102 Squaristor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C to +125°C).

    • Wirewound radial leaded precision resistor
    • Available in any resistance between 10Ω and 200kΩ including custom values
    • Small radial leaded through-hole package
    • Wire gauge of 22AWG (0.6mm)
    • Excellent stability of ±35ppm/yr
    • Noise levels so small they are immeasurable
    • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
    • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
    • Maximum working voltage of 150V
    • Power rating of 0.3W (±0.1%) and ≈0.18W (±0.01%) at +85°C
    • Maximum rated operating temperature +85°C
    • Temperature range from -55°C to +160°C

     

    The GR102 Squaristor radial wirewound precision resistor series offers ultra-precision in a small compact radial leaded through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

    Any custom resistance value between 10Ω and 200kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts (30 pc minimum order quantity for standard parts).

     

    General Resistance GG102 / GR102 Squaristor Series Specification Table

    AttributesValue
    Resistance value10Ω to 200kΩ
    Tolerance±0.01% / ±0.1%
    TCR±5ppm/°C (-55 to +125°C)
    Temperature range-55°C to +160°C
    Power rating *0.3W (±0.1%) / 0.18W (±0.01%)
    Maximum Voltage150VDC (or AC peak)
    Dielectric Withstanding Voltage1000Vrms (typical)
    Stability±35ppm/yr.
    Wire Gauge **22 AWG / 0.6mm

    * For other tolerances, please contact us
    ** All leads are tinned copper

    The General Resistance ultra-precision wirewound resistor series has been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

    The post General Resistance GR102 Squaristor Series appeared first on Rhopoint Components.

    ]]>