Core Sensors | Pressure & Temperature Sensors - Rhopoint Components https://www.rhopointcomponents.com/manufacturers/core-sensors/ Electronic Components, Sensors, Connectors & Enclosures Tue, 26 Nov 2024 14:04:42 +0000 en-GB hourly 1 https://www.rhopointcomponents.com/wp-content/uploads/2020/09/cropped-rc-marble-100x100.png Core Sensors | Pressure & Temperature Sensors - Rhopoint Components https://www.rhopointcomponents.com/manufacturers/core-sensors/ 32 32 Core Sensors CS60 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/industrial-pressure-sensors/core-sensors-cs60-series/ Fri, 01 Sep 2023 08:02:01 +0000 https://www.rhopointcomponents.com/?post_type=product&p=103265
  • Explosion-Proof Pressure Transducer
  • Pressure ranges from 50 PSI to 30,000 PSI
  • One piece diaphragm design - No internal O-rings or welds
  • Factory sealed stainless steel case - Withstands harsh environments
  • Accuracy of ≤±0.25% BFSL at 25°C (<10,000 PSI)
  • Pressure cycles of 100 million
  • Overpressure of 2x minimum

    • The post Core Sensors CS60 Series appeared first on Rhopoint Components.

    ]]>     The CS60 Explosion-Proof Pressure Transducer is a high strength sensor designed for use in Class I, Division 1 explosion-proof locations. The CS60 features an all welded, factory sealed stainless steel construction, offering a minimum IP66 rating. A 1/2” Male NPT conduit fitting with 2 meters of 20AWG flying leads is standard, allowing for easy installation of rigid metal conduit. A wide operating temperature range and configurable design makes the CS60 a versatile pressure transducer that was engineered to operate in some the harshest conditions. Available output signals include 1-5V and 4-20mA loop powered. The CS60 is an excellent solution for applications such as well head pressure measurement, natural gas compressors and oil exploration.

    • Explosion-Proof Pressure Transducer
    • Pressure ranges from 50 PSI to 30,000 PSI
    • One piece diaphragm design – No internal O-rings or welds
    • Factory sealed stainless steel case – Withstands harsh environments
    • Accuracy at 25°C of ≤±0.25% BFSL (≤±0.5% BFSL >10,000 PSI)
    • Stability of ≤±0.25% of FS (1 year)
    • Pressure cycles of 100 million
    • Overpressure of 2x minimum
    • Burst pressure of 5x or 60,000 PSI (whichever is less)
    • Operating temperature range −40°C to +85°C
    • Media temperature range of -40 to +120°C
    • IP66 rated
    • Please contact us for custom designs

    Approvals/Certifications for the Core CS60 series include:

    • Explosion-Proof:
      ✓ CSA Class I, Division 1, Groups A, B, C, D, T4
      ✓ Class I Zone 1 AEx db IIC T4 Gb
      ✓ Ex db IIC T4 Gb
    • Dust Ignition-Proof:
      ✓ Class II, Division 1, Groups E, F and G, T135°C
      ✓ Zone 21 AEx tb IIIC T135°C Db
      ✓ Ex tb IIIC T135°C Db
    • ANSI/UL 122701 Single Seal Certified
    • CE

    Typical applications for the CS60 Explosion-Proof Pressure Transducer series include:

    • Well head pressure measurement
    • Marine and offshore equipment
    • Oil exploration
    • Natural gas compression
    • Pipeline equipment
    • Power generation

    Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS60 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS-SM Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/industrial-pressure-sensors/core-sensors-cs-sm-series/ Wed, 10 Aug 2022 15:01:32 +0000 https://components.componentsdevelopment.com/?post_type=product&p=82978
  • Steel mill pressure transducer
  • Pressures up to 350 Bar
  • Accuracy down to ≤±0.25% BFSL
  • Pressure cycles of >100 million
  • Burst pressure of 10X or 20,000 PSI (whichever is less)
  • IP69 protection against high pressure washdown
  • Integral snubber protects against pressure transients

    • The post Core Sensors CS-SM Series appeared first on Rhopoint Components.

    ]]>
    The CS-SM steel mill pressure transducer is designed to withstand the rugged demands of the steel mill industry. Standard configuration includes a stainless steel body welded to a high-strength stainless steel sensing element offering 4X overpressure protection, an integral snubber to protect against pressure transients and an IP69 rating. Electrical connections include an integral cable or a 6-Pin Bendix with a variety of output signals and process connections.

    The CS-SM has been designed and built for the toughest environments. An integral snubber (or restrictor plug) is standard on the CS-SM, dampening the pressure spikes that are common in steel and rolling mill applications. Even with the addition of the snubber, the CS-SM is still capable of responding to pressure quickly; ~1kHz for voltage outputs and ~250Hz for 4-20mA current output. By carefully selecting the appropriate diaphragm thickness, the CS-SM is capable of achieving 4X overpressure protection and 10X (or 20,000 PSI) burst pressure protection. These protections are critical in applications such as stamping and roll forming as the sudden pressure events can easily exceed the intended application pressure. Transducers without high overpressure and burst pressure protection run the risk of permanent damage and potential damage to other equipment if the pressure cannot be monitored and controlled properly. A 6-Pin Bendix electrical connector is precision tig welded onto the sensor’s body, providing an IP69 rating. This ensures the sensor will continue operating, even during high-pressure washdown events.

    • Steel mill pressure transducer
    • Pressures up to 350 Bar
    • Accuracy down to ≤±0.25% BFSL
    • Stability (1 year) of ≤±0.25% of FS
    • Pressure cycles of >100 million
    • Overpressure of 4x minimum
    • Burst pressure of 10X or 20,000 PSI (whichever is less)
    • IP69 protection against high pressure washdown
    • Electrical output options of 4-20mA, 1-5V or 1-6V
    • Operating Temperature range of -40°C to +100°C
    • Media Temperature range of -40°C to +120°C
    • EMI / RFI protection
    • Integral snubber protects against pressure transients
    • Wetted material of 17-4PH

    Typical applications for the CS-SM steel mill pressure transducer series include:

    • Stamping
    • Roll forming
    • Rolling mill
    • Pumps


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy at 25°C *≤±0.25% BFSL
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles>100 million
    Overpressure4x minimum
    Burst Pressure10x or 20,000 PSI (whichever is less)
    Operating Temperature-40°C to +100°C
    Media Temperature-40°C to +120°C
    Compensated Temperature+20°C to +90°C
    Storage Temperature-40°C to +120°C
    TC Zero≤±1% of FS
    TC Span≤±1% of FS
    EMI / RFI ProtectionYes
    IP RatingIP69
    Vibration20g, 20 to 2400Hz
    Shock100g, 11msec, 1/2 sine

    * Accuracy includes non-linearity, hysteresis and non-repeatability

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    1 to 6V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS-SM Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS15 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/submersible-pressure-sensors/core-sensors-cs15-series/ Wed, 10 Aug 2022 12:55:41 +0000 https://components.componentsdevelopment.com/?post_type=product&p=82836
  • Non-Clogging submersible pressure transducer
  • Pressure ranges from 2 PSI to 50 PSI
  • Flush diaphragm prevents clogging
  • Hastelloy C276 diaphragm material
  • IP68 rated
  • Operating temperature of -40 to +85°C
  • Compensated temperatures from 0 to +55°C

    • The post Core Sensors CS15 Series appeared first on Rhopoint Components.

    ]]>

    The CS15 non-clogging submersible pressure transducer is designed for liquid level measurement in turbulent tanks and tanks with viscous medias such as wastewater lift stations. A Hastelloy C276 diaphragm, stainless steel construction and an ETFE cable jacket allow for installation in a wide variety of liquids. The heavy-duty steel cage anchors the sensor at the bottom of the tank to ensure accurate level readings as well as acting as a barrier between solids in the tank and the flush diaphragm of the sensor. A vent tube runs the length of the cable and quickly equalizes the barometric pressure within the sensor body. The CS15 is available in various output signals including 4-20mA for long-distance transmissions and voltage outputs for low power, low current consumption applications.

    The CS15 Non-Clogging Submersible Pressure Transducer was carefully engineered to withstand some of the toughest environments. With a thickness of 1 to 1.5 mils, the diaphragm is the thinnest component of the transducer. To help protect this critical component, Hastelloy* C276 (UNS N10276) is the standard diaphragm material. This material is a super nickel-molybdenum-chromium alloy offering excellent corrosion resistance, prolonging the life of the transducer. 300 series stainless steel (316L and 304) makes up the remaining metallic construction including the heavy-duty steel cage, housing (case), and 1/2″ MNPT conduit fitting. Precision TIG welds along with a Kynar strain relief and Viton seals prevent liquids from entering the sensor, resulting in an IP68 rating.

    • Non-Clogging submersible pressure transducer
    • Pressure ranges from 2 PSI to 50 PSI
    • Flush diaphragm prevents clogging
    • Hastelloy C276 diaphragm material
    • IP68 rated
    • Operating temperature of -40 to +85°C
    • Compensated temperatures from 0 to +55°C
    • Accuracy down to ≤±0.25% BFSL / ≤ ± 0.5% BFSL (2 PSI)
    • Stability (1 year) of ≤ ±0.25% of FS
    • Pressure cycles of 50 million
    • Overpressure of 2x minimum
    • Burst pressure of 5x or 500 PSI (whichever is less)
    • Electrical output options of 4-20mA, 1-5V, 0.5-2.5V non-ratiometric or 0.5-4.5V ratiometric

    Typical applications for the CS15 submersible pressure transducer series include:

    • Wastewater lift stations
    • Liquid level measurement
    • Tanks with viscous media
    • Turbulent tanks


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy at 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (2 PSI)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles50 million
    Overpressure2x minimum
    Burst Pressure5x or 250 PSI (whichever is less)
    Operating Temperature-40°C to +85°C
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to +125°C
    TC Zero≤±1% of FS
    ≤±2% of FS (2 PSI)
    TC Span≤±1% of FS
    ≤±2% of FS (2 PSI)
    EMI / RFI ProtectionYes
    IP RatingIP68 minimum
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine
    Weight (excluding cable)~3.5lbs
    Wetted materialSee Dimensions / Material image
    Cable conductors22 AWG
    Cable pull strength150lbs

    * Accuracy includes non-linearity, hysteresis and non-repeatability

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.comfor more information.

    The post Core Sensors CS15 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS54 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/differential-pressure-sensors/core-sensors-cs54-series/ Wed, 10 Aug 2022 07:51:27 +0000 https://components.componentsdevelopment.com/?post_type=product&p=82810
  • Non-Incendive Differential Pressure Transducer
  • Differential pressure up to 50 PSI
  • Line pressure up to 500 PSI
  • Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below)
  • Overpressure of 2X or 500 PSI (whichever is less)
  • Temperature range −40°C to +80°C
  • Media temperature of -40 to +125°C

    • The post Core Sensors CS54 Series appeared first on Rhopoint Components.

    ]]>

    The CS54 non-incendive differential pressure transducer is a high-strength sensor designed for differential pressure measurements of liquids and gases in Class I, Division 2 hazardous locations. A 316L SS oil-filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1/4″ MNPT or FNPT process connections.

    In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS54 is offered with an integral Turck® Minifast® electrical connection.

    When combined with a CSA Division 2 approved Turck® cordset and a Turck® Lokfast Guard, there is no requirement for a conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.

    • Non-Incendive Differential Pressure Transducer
    • Differential pressure up to 50 PSI
    • Line pressure up to 500 PSI **
    • Bi-directional pressure ranges available
    • Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below) *
    • Stability (1 year) of ≤±0.25% of FS
    • Pressure cycles of 4 million
    • Overpressure of 2x or 500 PSI (whichever is less), configured differential pressure ***
    • Burst pressure of 3x configured differential pressure ***
    • Temperature range −40°C to +80°C (-20 to +80°C using DIN 43650-A)
    • Media temperature of -40 to +125°C (-40 to +105°C using DIN 43650-A)
    • Electrical output options of 4-20mA, 1-5V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
    • 316L SS diaphragm / oil filled sensor element
    • 1/4” NPT or FNPT process connections

    * Accuracy includes non-linearity, hysteresis and non-repeatability
    ** Max line pressure is the highest common mode pressure that can be applied to the sensor without damage
    *** Overpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur

    Approvals for the Core CS54 series include:

    • CSA Class I, Division 2, Groups A, B, C, D T4 Approved
    • ABS (American Bureau of Shipping) Approved
    • CE

    Note: Must use an approved barrier to maintain listed certifications. See page 4 of the datasheet for entity parameters.

    Typical applications for the CS54 Non-Incendive Differential Pressure Transducer include:

    • Filtration
    • Cryogenic bulk tank level measurement
    • External fuel tank level measurement
    • Compression systems
    • Test stands


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy at 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (2 PSI & below)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles4 million
    Maximum Line Pressure **500 PSI
    Overpressure ***2x or 500 PSI (whichever is less, configured differential pressure)
    Burst Pressure ***3x configured differential pressure
    Operating Temperature-40°C to +80°C
    -20°C to +80°C for DIN 43650-A
    Media Temperature-40°C to +125°C
    -40°C to +105°C for DIN 43650-A
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to +125°C
    TC Zero≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    TC Span≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    EMI / RFI ProtectionYes
    IP Rating **IP65 minimum
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    ImageText
    danger iconCaution must be taken when installing and operating the CS50/CS51/CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions, instructions or have any other enquiries.


    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS54 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS10 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/industrial-pressure-sensors/core-sensors-cs10-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs10-series/
  • Industrial pressure transducer
  • Pressure ranges from vacuum up to 45,000 PSI
  • Accuracy down to ≤ ±0.25% BFSL
  • Stability (1 year) of ≤ ±0.25% of FS
  • Overpressure of 2x minimum
  • Temperature range from -40°C to +85°C
  • Media Temperature from -40°C to +120°C

    • The post Core Sensors CS10 Series appeared first on Rhopoint Components.

    ]]>
    The CS10 industrial pressure transducer series from Core Sensors is designed for demanding applications by offering a robust package and a variety of customisations to suit various requirements. Available pressures from vacuum to 45,000 PSI with an accuracy of ≤±0.25% BFSL. The CS10 utilises MEMS silicon strain gauges mounted to a stainless steel or nickel alloy sensing element as well as ASIC electronics with analog voltage or 4-20mA loop powered output signals. Various process connection wetted materials are available including 17-4PH, 316L SS and nickel alloys (Hastelloy C276 or Inconel 718). This sensor series has an operating temperature range of -40°C to +85°C with a media temperature range of -40°C to +120°C.

    The CS10 is a highly configurable pressure sensor series making these some of the best options for demanding industrial and hazardous applications, where ruggedness and reliability are top priority. With various threaded connection sizes, pressure ranges, electrical connections including integral cable or connectors, wetted materials to ensure adequate compatibility, and numerous output signal options, allows Core Sensors to customise the CS10 to solve just about any measurement challenge.

    • Industrial pressure transducer
    • Pressure ranges from vacuum up to 45,000 PSI
    • Accuracy down to ≤ ±0.25% BFSL
    • Stability (1 year) of ≤ ±0.25% of FS
    • Pressure cycles of 100 million
    • Overpressure of 2x minimum
    • Burst pressure of 5x or 60,000 PSI (whichever is less)
    • Electrical output options of Current, Voltage, Ratiometric Voltage, Low Power Voltage & Millivolt
    • Temperature range from -40°C to +85°C
    • Media Temperature from -40°C to +120°C
    • EMI / RFI protection
    • Oxygen cleaning available
    • Optional integral snubber
    • Wetted materials of 17-4PH, 316L SS or nickel alloys (Hastelloy C276 and Inconel 718)
    • Semi custom and custom designs available

    Approvals for the Core CS10 series include:

    • CE

    Note: CSA ordinary location available. Contact us for more information

    Typical applications for the CS10 industrial pressure transducer series include:

    • Water pressure monitoring
    • Hydraulic/pneumatic equipment
    • HVAC/R controls
    • Building controls
    • Hydrogen (316L SS only)
    • Low pressure external tank level monitoring


    Performance, Thermal & Environmental Specifications Table

    AttributeValue
    Accuracy @ 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (≤2 PSI & >10,000 PSI)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles100 million
    Overpressure2x minimum
    Burst Pressure5x or 60,000 PSI (whichever is less)
    Operating Temperature-40°C to +85°C
    Media Temperature-40°C to +120°C
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to 125°C
    TC Zero≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    TC Span≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    EMI / RFI ProtectionYes
    IP Rating **IP65 (minimum)

    * Accuracy includes non-linearity, hysteresis and non-repeatability
    ** IP Rating applies when electrical connector is attached with the appropriate ingress protection and is dependent on electrical termination selected. Contact us for more information.

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    0 to 5V (3-wire)
    1 to 6V
    0 to 10V (3-wire)
    Excitation10 to 28VDC
    15 to 28VDC (0 to 10V output)
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Millivolt)

    AttributeValue
    Outputs10mV/V
    Excitation5VDC (typical)
    Current Consumption<5mA
    Output Impedance >1MΩ
    Frequency Response~5kHz (minimum)
    Zero Offset (of FS)≤±2% (maximum)
    Span Tolerance (of FS)≤±2% (maximum)

    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS10 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS11 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/industrial-pressure-sensors/core-sensors-cs11-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs11-series/
  • Compact media isolated pressure sensor
  • Pressure ranges from 0-2 up to 2,000 PSI
  • Accuracy as low as ≤ ±0.25% BFSL
  • Stability of ≤ ±0.2% of FS (1 year)
  • Pressure cycles of 10 million
  • Overpressure of 2x minimum
  • Burst pressure of 5x or 4,000 PSI

    • The post Core Sensors CS11 Series appeared first on Rhopoint Components.

    ]]>

    The CS11 compact media isolated pressure sensor from Core Sensors is the ideal sensor for any application requiring a small profile with stable, repeatable performance. This series is available with pressure ranges from 2 PSI up to 2,000 PSI, accuracy as low as ≤±0.25% BFSL, stability of ≤±0.25% of FS (1 year) and offers a 10mV/V output signal. The CS11 can be configured in multiple ways to suit your needs. This series is available in either threaded or non-threaded. Non-threaded configurations are produced with an O-ring seal for easy installation into pressure manifolds. Threaded connections include 1/4” and 1/8” Male NPT with further options available. Pressure is transferred from the 316L SS diaphragm to the isolated silicon sensing element via a fluid filled cavity, this results in a highly stable and fast response measurement over a wide operating temperature range of -40°C to +120°C. The CS11 features a configurable design, allowing broad customisation possibilities. For more information on possible options, please contact one of our engineers.

    • Compact media isolated pressure sensor
    • Pressure ranges available from 0-2 up to 2,000 PSI
    • Accuracy as low as ≤ ±0.25% BFSL
    • Stability of ≤ ±0.2% of FS (1 year)
    • Pressure cycles of 10 million
    • Overpressure of 2x minimum
    • Burst pressure of 5x or 4,000 PSI (whichever is less)
    • Electrical output of 10mV/V
    • Temperature range −40°C to +120°C
    • Various process connections available in 316L SS
    • Semi custom and custom designs available

    Typical applications for the CS11 compact media isolated pressure sensor series include:

    • Pressure measurement in confined areas
    • Low pressure monitoring
    • General industrial equipment
    • Pressure control panels

    For information on wiring a Millivolt connection, please see our wiring guide here.


    Performance, Thermal & Environmental Specifications Table

    AttributeValue
    Accuracy @ 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (2 PSI)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles10 million
    Overpressure2x minimum
    Burst Pressure5x or 4,000 PSI (whichever is less)
    Operating Temperature-40°C to +120°C
    Media Temperature-40°C to +120°C
    Compensated Temperature0°C to +70°C
    Storage Temperature-40°C to 125°C
    TC Zero≤±1.5% of FS
    ≤±2% of FS (2 PSI)
    TC Span≤±1.5% of FS
    ≤±2% of FS (2 PSI)
    EMI / RFI ProtectionYes
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine

    * Accuracy includes non-linearity, hysteresis and non-repeatability

    Electrical Specifications (Millivolt)

    AttributeValue
    Outputs10mV/V
    Excitation5VDC (typical)
    10VDC (maximum)
    Current Consumption<5mA
    Input Impedance5000Ω (typical)
    Output Impedance 5000Ω (typical)
    Frequency Response~5kHz (minimum)
    Zero Offset (of FS)±2% (maximum)
    Span Tolerance (of FS)±2% (maximum)

    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS11 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS12 Series https://www.rhopointcomponents.com/product/sensors/core-sensors-cs12-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs12-series/
  • Submersible pressure transducer
  • Pressure ranges from 1 to 100 PSI
  • Accuracy down to ≤±0.25% BFSL
  • Stability (1 year) of ≤±0.25% of FS
  • Pressure cycles of 50 million
  • Overpressure of 2x minimum
  • Burst pressure of 5x or 500 PSI

    • The post Core Sensors CS12 Series appeared first on Rhopoint Components.

    ]]>
    The CS12 Submersible Pressure Transducer is the ideal solution for continuous liquid level measurement. This transducer is engineered using 304 or 316L stainless steel construction, corrosion resistant ETFE cable jacket, and a Nylon strain relief for maximum versatility in a wide range of applications. The CS12 can also be utilised for non-submersible applications where flooding is a concern. 100 PSI is the maximum pressure rating for submersion however for non-submersible applications, the CS12 can be configured above 100 PSI, ensuring continuous pressure measurement even during flooding events. This pressure transducer is available with various outputs, an accuracy of ≤±0.25% BFSL and an operating temperature range of -40°C to +85°C.

    • Submersible pressure transducer
    • Pressure ranges available from 1 PSI to 100 PSI
    • Accuracy down to ≤±0.25% BFSL
    • Stability (1 year) of ≤±0.25% of FS
    • Pressure cycles of 50 million
    • Overpressure of 2x minimum
    • Burst pressure of 5x or 500 PSI (whichever is less)
    • Electrical output options of 4-20mA, 1-5V, 0.5-2.5V non-ratiometric or 0.5-4.5V ratiometric
    • Temperature range −40°C to +85°C
    • 304 or 316L stainless steel construction
    • IP68 rated
    • ETFE cable jacket with wide diameter vent tube
    • Removable nose cone

    Typical applications for the CS12 submersible pressure transducer series include:

    • Ballast tanks
    • Flood monitoring
    • Depth measurement
    • Level monitoring


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy @ 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (≤2 PSI & below)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles50 million
    Overpressure2x minimum
    Burst Pressure5x or 500 PSI (whichever is less)
    Maximum Submersion100 PSI
    Operating Temperature-40°C to +85°C
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to 125°C
    TC Zero≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    TC Span≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    EMI / RFI ProtectionYes
    IP RatingIP68
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine
    Weight (ex cable)~0.50lb
    Cable Conductors22 AWG
    Cable Pull Strength150lb

    * Accuracy includes non-linearity, hysteresis and non-repeatability

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    1 to 6V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Millivolt)

    AttributeValue
    Outputs10mV/V
    Excitation5VDC (typical)
    Current Consumption<5mA
    Output Impedance >1MΩ
    Frequency Response~5kHz (minimum)
    Zero Offset (of FS)≤±2% (maximum)
    Span Tolerance (of FS)≤±2% (maximum)


    Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS12 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS14 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/differential-pressure-sensors/core-sensors-cs14-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs14-series/
  • Wet/wet differential pressure transducer
  • Differential pressure ranges up to 300 PSI
  • Line pressure up to 500 PSI
  • Accuracy of ≤±0.25% BFSL at 25°C
  • Stability of ≤±0.25% of FS
  • Pressure cycles of 4 million
  • Overpressure of 2x or 500 PSI

    • The post Core Sensors CS14 Series appeared first on Rhopoint Components.

    ]]>
    The CS14 wet/wet differential pressure transducer series from Core Sensors is designed for various applications including filtration and tank level monitoring. The options include differential pressure ranges of up to 300 PSI with uni-driectional and bi-directional variants, both male or female 1/4” NPT process connections, and a choice of voltage or 4-20mA loop powered output signal. The CS14 comes with a 316L SS oil filled sensor element which provides excellent stability over a wide operating temperature range of −40°C to +105°C. With a fully welded design and no internal o-rings, this allows the sensor to be used in wet/wet, wet/dry and dry/dry applications. The CS14’s robust package offers corrosion resistance against various liquids and gases all within a compact design, making it a perfect solution for differential measurement applications in confined spaces.

    • Wet/wet differential pressure transducer
    • Differential pressure ranges from 1 PSI up to 300 PSI
    • Line pressure up to 500 PSI **
    • Accuracy of ≤±0.25% BFSL at 25°C * (≤±0.5% BFSL for 2 PSI & below)
    • Stability of ≤±0.25% of FS (1 year)
    • Pressure cycles of 4 million
    • Overpressure of 2x or 500 PSI (whichever is less, configured differential pressure) ***
    • Burst pressure of 3x (configured differential pressure) ***
    • Electrical output options of 4-20mA, 1-5V, 0-5V (3 wire) or 0.5-4.5V ratiometric
    • Operating temperature range of -40°C to +105°C
    • 316L SS diaphragm / oil filled sensor element
    • Both male and female 1/4” NPT process connections

    Approvals/Certifications for the Core CS14 series include:

    • CE

    Typical applications for the CS14 wet/wet differential pressure transducer series include:

    • Filtration
    • Cryogenic bulk tank level measurement
    • Tank level monitoring


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy @ 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (≤2 PSI & below)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles4 million
    Max Line Pressure **500 PSI
    Maximum Differential Pressure300 PSI
    Overpressure ***2x or 500 PSI (whichever is less, configured differential pressure)
    Burst Pressure ***3x configured differential pressure
    Operating Temperature-40°C to +105°C
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to 125°C
    TC Zero≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    TC Span≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    EMI / RFI ProtectionYes
    IP Rating ****IP65 minimum
    Vibration10g, 20 to 5000Hz
    Shock100g, 11msec, 1/2 sine


    * Accuracy includes non-linearity, hysteresis and non-repeatability
    ** Max line pressure is the highest equal common mode pressure that can be applied to the sensor without damage.
    *** Overpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur.
    **** IP Rating applies when the electrical connector is attached with the appropriate ingress protection and is dependent on the electrical termination selected. Contact us for more information.

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    0 to 5V (3 wire)
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS14 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS20 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/temperature-transducers-and-probes/core-sensors-cs20-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs20-series/
  • Industrial temperature transmitter
  • RTD sensor type, PT100, Class B
  • Media temperature range of -40°C up to +200°C *
  • Operating temperature range of -40°C up to +85°C
  • Total error at RT & FS of ≤±1%
  • Maximum pressure of 5,000 PSI
  • Amplified 4-20mA or 1-5V output signal

    • The post Core Sensors CS20 Series appeared first on Rhopoint Components.

    ]]>
    The CS20 industrial temperature transmitter series from Core Sensors is designed for temperature measurement applications with configurable temperature ranges from −40°C up to +200°C. The CS20 series is constructed using a 316L SS probe and thread, making it compatible with a wide range of process liquids and gases. Amplified outputs of 4mA to 20mA or 1V to 5V eliminate the need for any external amplification. Various probe lengths and electrical connectors including a DIN43650-A or M12x1 Eurofast are available, further simplifying installation.

    • Industrial temperature transmitter
    • RTD sensor type, PT100, Class B
    • Media temperature range of -40°C up to +200°C *
    • Operating temperature range of -40°C up to +85°C
    • Total error at RT ≤±1%
    • Total error at FS ≤±1%
    • Maximum pressure of 5,000 PSI
    • Amplified 4-20mA or 1-5V output signal
    • 316L SS probe and process connection
    • Choice of 1/2″ NPT male or 1/4″ NPT male process connections
    • Reverse polarity and EMI protection
    • IP65 Rated **

    * Media temperature is user selected at the time of ordering. Not all transmitters are scaled to measure –40 to +200°C.
    ** IP Rating applies when the electrical connector is attached with the appropriate ingress protection and is dependent on the electrical termination selected. Contact us for more information.

    Typical applications for the CS20 industrial pressure transducer series include:

    • Gearbox lubrication systems
    • Hydraulic oil fluid temperature
    • Gas Flow temperature
    • Water and chemical storage


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Sensor TypeRTD
    PT100, Class B
    Total Error at RT≤±1%
    Total Error at FS≤±1%
    Maximum Pressure5,000 PSI
    Operating Temperature-40°C to +85°C
    Media Temperature-40°C to +200°C
    Storage Temperature-40°C to +125°C
    EMI/RFI ProtectionYes
    IP Rating **IP65 minimum

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit for more information.

    The post Core Sensors CS20 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS50 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/industrial-pressure-sensors/core-sensors-cs50-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs50-series/
  • Non-incendive pressure transducer
  • Pressure ranges from 50 PSI to 30,000 PSI
  • Accuracy of ≤±0.25% BFSL at 25°C
  • Stability of ≤±0.25% of FS
  • Pressure cycles of 100 million
  • Overpressure of 2x minimum
  • Burst pressure of 5x or 60,000 PSI

    • The post Core Sensors CS50 Series appeared first on Rhopoint Components.

    ]]>
    The CS50 non-incendive pressure transducer from Core Sensors is a high-strength sensor designed for use in hazardous environments with various approvals and certifications. Available with pressure ranges from 50 PSI up to 30,000 PSI with an accuracy of ≤±0.25% BFSL. The CS50 has a selection of electrical output options, as well as a choice of process connections and wetted materials available with an operating temperature range of -40°C to +80°C and a media temperature range of -40 to +125°C. The Robust design and variety of configurable options make the CS50 series a versatile pressure transducer designed to operate in some of the harshest conditions. Utilising an all welded stainless steel one-piece diaphragm with no internal O-rings or welds, the series also offers a minimum ingress protection of IP65. The CS50 is an excellent solution for applications such as natural gas compression, hydrogen compression and storage, and process control instrumentation.

    In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS50 non-incendive pressure transducer is offered with an integral Turck Mini-Fast electrical connection. When combined with a Turck cordset (with ITC rated cable) and a Turck Lokfast Guard, there is no requirement for conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.

    *Core Sensors recommends confirming hazardous location installation requirements with your local inspector as each installation is unique.

    • Non-incendive pressure transducer
    • Pressure ranges available from 50 PSI to 30,000 PSI
    • Accuracy of ≤±0.25% BFSL at 25°C
    • Stability of ≤±0.25% of FS (1 year)
    • Pressure cycles of 100 million
    • Overpressure of 2x minimum
    • Burst pressure of 5x or 60,000 PSI (whichever is less)
    • Various electrical output option (see tables below for more details)
    • Operating temperature range −40°C to +80°C
    • Media temperature range of -40 to +125°C
    • Reverse polarity and EMI protection
    • IP65 minimum rated
    • One piece diaphragm design with no internal O-rings or welds
    • Various wetted materials available in 316L SS, 17-4PH, Hastelloy C276 (special order item) and Inconel 718 (special order item)
    • Please contact us for custom designs

    Approvals/Certifications for the Core CS50 series include:

    • CSA Class I, Division 2 Groups A,BC,D T4
    • ANSI/UL 122701 Single Seal
    • ABS (American Bureau of Shipping)
    • CE

    Typical applications for the CS50 non-incendive pressure transducer series include:

    • Hydrogen compression & storage
    • Natural gas compression
    • Oil exploration
    • Process control


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy at 25°C **≤±0.25% BFSL
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles100 million
    Overpressure2x minimum
    Burst Pressure5x or 60,000 PSI (whichever is less)
    Operating Temperature-40°C to +80°C
    -20°C to +80°C for DIN 43650-A
    Media Temperature-40°C to +125°C
    -40°C to +105°C for DIN 43650-A
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to +125°C
    TC Zero≤±1% of FS
    TC Span≤±1% of FS
    EMI / RFI ProtectionYes
    IP Rating ***IP65 minimum
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    1 to 6V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    ImageText
    danger iconCaution must be taken when installing and operating the CS50/CS51/CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions, instructions or have any other enquiries.


    Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS50 Series appeared first on Rhopoint Components.

    ]]>