Introducing Cell Guard, a cutting-edge CAN-based sensor designed to revolutionise battery system monitoring. This versatile device measures absolute pressure, air temperature, Volatile Organic Compounds (VOCs), absolute air water content, relative humidity, dew point temperature, and acceleration. With configurable CAN bus speed and address, and an included CAN DBC file, Cell Guard integrates seamlessly into virtually any battery system, providing early detection of cell venting and moisture formation.

Cell Guard features a low power mode that continuously monitors the environment, transmitting data only when a set threshold is exceeded, thereby conserving energy. Additionally, its low side drive function pin, capable of 500mA, can be triggered when programmable thresholds are met, ensuring prompt response to critical conditions.

Equipped with a 5-pin automotive-rated Molex Nano-Fit Power connector, Cell Guard’s compact size and lightweight design allow for easy installation in most vehicles and energy storage systems. Developed in accordance with ISO26262 and rigorously tested to meet automotive standards, including ISO7637-2 2011, ISO 17650-2 2012, and ISO 17650-4 2010, Cell Guard ensures reliability and performance. Enhance your battery system’s safety and efficiency with the state-of-the-art Cell Guard sensor.

Product Features

• Absolute Pressure: 0.3 to 1.2 Bar
• Air Temperature: -40°C to +125°C
• Volatile Organic Compounds (VOCs): 0 to 6553.5 ppm
• Absolute Humidity: 0 to 35000mg/m3
• Relative Humidity: 0 to 100%
• Dew Point Temperature: 0 to 100°C
• Shock load and duration up to ±24G

For quick desktop analysis, use alongside the Cell Guard Development Kit.

Typical applications for the Cell Guard

• Battery Packs in Energy Storage Systems
• Battery Packs in Electric Vehicles

The post Metis Engineering Cell Guard appeared first on Rhopoint Components.

The IVT 3 is a compact high precision current measurement device, which is built on a platform concept where functional components can be added to adapt to many different use cases. The Pro version supports insulation resistance monitoring and 3 or 6 voltage measurement channels. The IVT 3 series is developed according to ISO 26262:2018 (Road vehicles – Functional safety).

Key features of the IVT 3 Pro Current & Voltage Measurement Sensors include:

• Shunt based current measurement (ASIL C)
• 3 or 6 voltage measurement channels (ASIL B)
• Active insulation monitoring (QM) (In samples stage of development)
• Temperature measurement
• Current measurement range of ±1,000A (nominal), 1,500A (overcurrent) & 4,000A (Extended)
• Voltage measurement range of ±1000V (nominal), 1,250V (Extended)
• Initial accuracy of ±0.1% of rdg.* +0.05A
• Total accuracy of ±0.4% of rdg.* +0.1A
• Isolation according to ISO 60664 (1,000V basic isolation)
• Communication based on CAN 2.0B with DBC
• Diagnosis via UDS
• Supply voltage 12V/24V
• Temperature range from -40°C to +125°C

^{*reading; measured value}

Typical DC applications for the IVT 3 Pro current and voltage measurement module base series include:

• Hybrid and full electric vehicles
• Stationary energy storage systems
• Uninterruptable power supply (UPS) systems
• Battery based applications
• Industrial Applications
• Fuel cells

Isabellenhütte has been one of the world’s leading providers of ultra-modern measurement technology systems for years as a proven specialist in the precise measurement of high currents. We offer our customers precision measurement systems with exceptional performance data under the brand name ISAscale®. Please visit www.isabellenhuette.de for more information on ISAscale® or contact one of our technical engineers today.

The post Isabellenhütte IVT 3 Pro appeared first on Rhopoint Components.

Key features of the IVT 3 Base Current Measurement Sensors include:

• Compact Shunt based High Precision Current Measurement Device (ASIL C)
• Temperature measurement
• Nominal current measurement range of ±1.000A
• Extended measurement range of ±4000A
• Initial accuracy of ±0.1% of rdg.* +0.05A
• Total accuracy of ±0.4% of rdg.* +0.1A
• Isolation according to ISO 60664 (1,000V basic isolation)
• Temperature range from -40°C to +125°C
• Supply voltage 12V/24V**
• CAN 2.0B with DBC
• Firmware update via OBD
• Diagnosis via UDS
• Extended diagnostic via AUTOSAR 4.0.3
• CAN termination (Optional)
• Independent Analog Channel (optional)
• Sleep mode (optional)

^{*reading; measured value
**24V development by request}

Typical DC applications for the IVT 3 Base current measurement module base series include:

• Hybrid and full electric vehicles
• Stationary energy storage systems
• Uninterruptable power supply (UPS) systems
• Battery based applications
• Industrial Applications
• Fuel cells

Isabellenhütte has been one of the world’s leading providers of ultra-modern measurement technology systems for years as a proven specialist in the precise measurement of high currents. We offer our customers precision measurement systems with exceptional performance data under the brand name ISAscale®. Please visit www.isabellenhuette.de for more information on ISAscale® or contact one of our technical engineers today.

The post Isabellenhütte IVT 3 Base appeared first on Rhopoint Components.

• Explosion-Proof Pressure Transducer
• Pressure ranges from 50 PSI to 30,000 PSI
• One piece diaphragm design – No internal O-rings or welds
• Factory sealed stainless steel case – Withstands harsh environments
• Accuracy at 25°C of ≤±0.25% BFSL (≤±0.5% BFSL >10,000 PSI)
• Stability of ≤±0.25% of FS (1 year)
• Pressure cycles of 100 million
• Overpressure of 2x minimum
• Burst pressure of 5x or 60,000 PSI (whichever is less)
• Operating temperature range −40°C to +85°C
• Media temperature range of -40 to +120°C
• IP66 rated
• Please contact us for custom designs

Approvals/Certifications for the Core CS60 series include:

• Explosion-Proof:
  ✓ CSA Class I, Division 1, Groups A, B, C, D, T4
  ✓ Class I Zone 1 AEx db IIC T4 Gb
  ✓ Ex db IIC T4 Gb
• Dust Ignition-Proof:
  ✓ Class II, Division 1, Groups E, F and G, T135°C
  ✓ Zone 21 AEx tb IIIC T135°C Db
  ✓ Ex tb IIIC T135°C Db
• ANSI/UL 122701 Single Seal Certified
• CE

Typical applications for the CS60 Explosion-Proof Pressure Transducer series include:

• Well head pressure measurement
• Marine and offshore equipment
• Oil exploration
• Natural gas compression
• Pipeline equipment
• Power generation

Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

The post Core Sensors CS60 Series appeared first on Rhopoint Components.

The CS15 non-clogging submersible pressure transducer is designed for liquid level measurement in turbulent tanks and tanks with viscous medias such as wastewater lift stations. A Hastelloy C276 diaphragm, stainless steel construction and an ETFE cable jacket allow for installation in a wide variety of liquids. The heavy-duty steel cage anchors the sensor at the bottom of the tank to ensure accurate level readings as well as acting as a barrier between solids in the tank and the flush diaphragm of the sensor. A vent tube runs the length of the cable and quickly equalizes the barometric pressure within the sensor body. The CS15 is available in various output signals including 4-20mA for long-distance transmissions and voltage outputs for low power, low current consumption applications.

The CS15 Non-Clogging Submersible Pressure Transducer was carefully engineered to withstand some of the toughest environments. With a thickness of 1 to 1.5 mils, the diaphragm is the thinnest component of the transducer. To help protect this critical component, Hastelloy* C276 (UNS N10276) is the standard diaphragm material. This material is a super nickel-molybdenum-chromium alloy offering excellent corrosion resistance, prolonging the life of the transducer. 300 series stainless steel (316L and 304) makes up the remaining metallic construction including the heavy-duty steel cage, housing (case), and 1/2″ MNPT conduit fitting. Precision TIG welds along with a Kynar strain relief and Viton seals prevent liquids from entering the sensor, resulting in an IP68 rating.

• Non-Clogging submersible pressure transducer
• Pressure ranges from 2 PSI to 50 PSI
• Flush diaphragm prevents clogging
• Hastelloy C276 diaphragm material
• IP68 rated
• Operating temperature of -40 to +85°C
• Compensated temperatures from 0 to +55°C
• Accuracy down to ≤±0.25% BFSL / ≤ ± 0.5% BFSL (2 PSI)
• Stability (1 year) of ≤ ±0.25% of FS
• Pressure cycles of 50 million
• Overpressure of 2x minimum
• Burst pressure of 5x or 500 PSI (whichever is less)
• Electrical output options of 4-20mA, 1-5V, 0.5-2.5V non-ratiometric or 0.5-4.5V ratiometric

Typical applications for the CS15 submersible pressure transducer series include:

• Wastewater lift stations
• Liquid level measurement
• Tanks with viscous media
• Turbulent tanks

Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.comfor more information.

The post Core Sensors CS15 Series appeared first on Rhopoint Components.

The CS54 non-incendive differential pressure transducer is a high-strength sensor designed for differential pressure measurements of liquids and gases in Class I, Division 2 hazardous locations. A 316L SS oil-filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1/4″ MNPT or FNPT process connections.

In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS54 is offered with an integral Turck® Minifast® electrical connection.

When combined with a CSA Division 2 approved Turck® cordset and a Turck® Lokfast Guard, there is no requirement for a conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.

• Non-Incendive Differential Pressure Transducer
• Differential pressure up to 50 PSI
• Line pressure up to 500 PSI **
• Bi-directional pressure ranges available
• Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below) *
• Stability (1 year) of ≤±0.25% of FS
• Pressure cycles of 4 million
• Overpressure of 2x or 500 PSI (whichever is less), configured differential pressure ***
• Burst pressure of 3x configured differential pressure ***
• Temperature range −40°C to +80°C (-20 to +80°C using DIN 43650-A)
• Media temperature of -40 to +125°C (-40 to +105°C using DIN 43650-A)
• Electrical output options of 4-20mA, 1-5V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
• 316L SS diaphragm / oil filled sensor element
• 1/4” NPT or FNPT process connections

* Accuracy includes non-linearity, hysteresis and non-repeatability
** Max line pressure is the highest common mode pressure that can be applied to the sensor without damage
*** Overpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur

Approvals for the Core CS54 series include:

• CSA Class I, Division 2, Groups A, B, C, D T4 Approved
• ABS (American Bureau of Shipping) Approved
• CE

Note: Must use an approved barrier to maintain listed certifications. See page 4 of the datasheet for entity parameters.

Typical applications for the CS54 Non-Incendive Differential Pressure Transducer include:

• Filtration
• Cryogenic bulk tank level measurement
• External fuel tank level measurement
• Compression systems
• Test stands

Image

Text

Caution must be taken when installing and operating the CS50/CS51/CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions, instructions or have any other enquiries.

Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

The post Core Sensors CS54 Series appeared first on Rhopoint Components.

In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS50 non-incendive pressure transducer is offered with an integral Turck Mini-Fast electrical connection. When combined with a Turck cordset (with ITC rated cable) and a Turck Lokfast Guard, there is no requirement for conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.

*Core Sensors recommends confirming hazardous location installation requirements with your local inspector as each installation is unique.

• Non-incendive pressure transducer
• Pressure ranges available from 50 PSI to 30,000 PSI
• Accuracy of ≤±0.25% BFSL at 25°C
• Stability of ≤±0.25% of FS (1 year)
• Pressure cycles of 100 million
• Overpressure of 2x minimum
• Burst pressure of 5x or 60,000 PSI (whichever is less)
• Various electrical output option (see tables below for more details)
• Operating temperature range −40°C to +80°C
• Media temperature range of -40 to +125°C
• Reverse polarity and EMI protection
• IP65 minimum rated
• One piece diaphragm design with no internal O-rings or welds
• Various wetted materials available in 316L SS, 17-4PH, Hastelloy C276 (special order item) and Inconel 718 (special order item)
• Please contact us for custom designs

Approvals/Certifications for the Core CS50 series include:

• CSA Class I, Division 2 Groups A,BC,D T4
• ANSI/UL 122701 Single Seal
• ABS (American Bureau of Shipping)
• CE

Typical applications for the CS50 non-incendive pressure transducer series include:

• Hydrogen compression & storage
• Natural gas compression
• Oil exploration
• Process control

Image

Text

Caution must be taken when installing and operating the CS50/CS51/CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions, instructions or have any other enquiries.

Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

The post Core Sensors CS50 Series appeared first on Rhopoint Components.

In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS51 Non-Incendive Pressure Transducer is offered with an integral Turck Mini-Fast electrical connection. When combined with a Turck cordset (with ITC rated cable) and a Turck Lokfast Guard, there is no requirement for conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.

*Core Sensors recommends confirming hazardous location installation requirements with your local inspector as each installation is unique.

• Non-incendive low pressure transducer
• Pressure ranges from 1 PSI up to 49 PSI
• Accuracy of ≤±0.25% BFSL at 25°C **
• Stability of ≤±0.25% of FS (1 year)
• Pressure cycles of 100 million
• Overpressure of 2x minimum
• Burst pressure of 5x or 245 PSI (whichever is less)
• Bi-directional pressure ranges available
• Various electrical output option (see tables below for more details)
• Temperature range from −20°C up to +80°C *
• Reverse polarity protection and EMI protection
• One piece design with isolated media
• Wetted materials available in 316L SS and Hastelloy C276 (special order item)
• IP65 minimum rated ***

* Temperature values are dependent on the chosen connection.
** Accuracy includes non-linearity, hysteresis and non-repeatability
*** IP Rating applies when the electrical connector is attached with the appropriate ingress protection and is dependent on the electrical termination selected. Contact us for more information.

Approvals/Certifications for the Core CS51 series include:

• CSA Class I, division 2, groups A, B, C, D T4
• ABS (American bureau of shipping)
• CE

Typical applications for the CS51 non-incendive low pressure transducer series include:

• Natural gas compression
• Oil exploration
• Process control
• Vapor recovery

Image

Text

Caution must be taken when installing and operating the CS50/CS51/CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions, instructions or have any other enquiries.

Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

The post Core Sensors CS51 Series appeared first on Rhopoint Components.

• Low profile, lightweight and precision pancake load cell
• Compact size with integral base and bolt-on flange electrical connector
• Maximum load ranges of 25lbs, 50lbs, 100lbs, 200lbs and 300lbs
• Temperature range −65°F (-53.89°C) to +130°F (+54.44°C)
• High accuracy of ±0.05% FSO BFSL
• Electrical output of 2mV/V ±25% FSO
• Light weight aircraft aluminium
• Temperature effect on zero of ±0.002% FSO/°F
• Temperature effect on span of ±0.002% reading/°F
• Creep, in 30 min if 0.025% load
• Zero balance of ±1% FSO
• Barometric compensation, shock and vibration protection
• Each unit comes with a 5 point calibration record traceable to NIST
• Low off-axis sensitivity
• Cycle life of 10 million

Optional features for the Stellar Technology PNC772 series include:

• Customer specified connectors/cable lengths
• Metric versions
• Customer specified electrical termination
• Internal amplifier for high level analog and/or digital output
• Special calibration
• Dual bridges

Potential markets for the Stellar Technology PNC772 series include:

• Aerospace, defence systems
• Alternative energy, industrial automation
• Medical and pharmaceutical, power generation
• Oil and Gas, process
• Subsea, test and measurement
• Transportation and automotive

The post Stellar Technology PNC772 Series appeared first on Rhopoint Components.