Oil & Gas Components for Harsh Environments - Rhopoint Energy https://www.rhopointcomponents.com/industries/oil-gas/ Electronic Components, Sensors, Connectors & Enclosures Thu, 17 Oct 2024 08:06:06 +0000 en-GB hourly 1 https://www.rhopointcomponents.com/wp-content/uploads/2020/09/cropped-rc-marble-100x100.png Oil & Gas Components for Harsh Environments - Rhopoint Energy https://www.rhopointcomponents.com/industries/oil-gas/ 32 32 Core Sensors CS60 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/industrial-pressure-sensors/core-sensors-cs60-series/ Fri, 01 Sep 2023 08:02:01 +0000 https://www.rhopointcomponents.com/?post_type=product&p=103265
  • Explosion-Proof Pressure Transducer
  • Pressure ranges from 50 PSI to 30,000 PSI
  • One piece diaphragm design - No internal O-rings or welds
  • Factory sealed stainless steel case - Withstands harsh environments
  • Accuracy of ≤±0.25% BFSL at 25°C (<10,000 PSI)
  • Pressure cycles of 100 million
  • Overpressure of 2x minimum

    • The post Core Sensors CS60 Series appeared first on Rhopoint Components.

    ]]>     The CS60 Explosion-Proof Pressure Transducer is a high strength sensor designed for use in Class I, Division 1 explosion-proof locations. The CS60 features an all welded, factory sealed stainless steel construction, offering a minimum IP66 rating. A 1/2” Male NPT conduit fitting with 2 meters of 20AWG flying leads is standard, allowing for easy installation of rigid metal conduit. A wide operating temperature range and configurable design makes the CS60 a versatile pressure transducer that was engineered to operate in some the harshest conditions. Available output signals include 1-5V and 4-20mA loop powered. The CS60 is an excellent solution for applications such as well head pressure measurement, natural gas compressors and oil exploration.

    • Explosion-Proof Pressure Transducer
    • Pressure ranges from 50 PSI to 30,000 PSI
    • One piece diaphragm design – No internal O-rings or welds
    • Factory sealed stainless steel case – Withstands harsh environments
    • Accuracy at 25°C of ≤±0.25% BFSL (≤±0.5% BFSL >10,000 PSI)
    • Stability of ≤±0.25% of FS (1 year)
    • Pressure cycles of 100 million
    • Overpressure of 2x minimum
    • Burst pressure of 5x or 60,000 PSI (whichever is less)
    • Operating temperature range −40°C to +85°C
    • Media temperature range of -40 to +120°C
    • IP66 rated
    • Please contact us for custom designs

    Approvals/Certifications for the Core CS60 series include:

    • Explosion-Proof:
      ✓ CSA Class I, Division 1, Groups A, B, C, D, T4
      ✓ Class I Zone 1 AEx db IIC T4 Gb
      ✓ Ex db IIC T4 Gb
    • Dust Ignition-Proof:
      ✓ Class II, Division 1, Groups E, F and G, T135°C
      ✓ Zone 21 AEx tb IIIC T135°C Db
      ✓ Ex tb IIIC T135°C Db
    • ANSI/UL 122701 Single Seal Certified
    • CE

    Typical applications for the CS60 Explosion-Proof Pressure Transducer series include:

    • Well head pressure measurement
    • Marine and offshore equipment
    • Oil exploration
    • Natural gas compression
    • Pipeline equipment
    • Power generation

    Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS60 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS15 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/submersible-pressure-sensors/core-sensors-cs15-series/ Wed, 10 Aug 2022 12:55:41 +0000 https://components.componentsdevelopment.com/?post_type=product&p=82836
  • Non-Clogging submersible pressure transducer
  • Pressure ranges from 2 PSI to 50 PSI
  • Flush diaphragm prevents clogging
  • Hastelloy C276 diaphragm material
  • IP68 rated
  • Operating temperature of -40 to +85°C
  • Compensated temperatures from 0 to +55°C

    • The post Core Sensors CS15 Series appeared first on Rhopoint Components.

    ]]>

    The CS15 non-clogging submersible pressure transducer is designed for liquid level measurement in turbulent tanks and tanks with viscous medias such as wastewater lift stations. A Hastelloy C276 diaphragm, stainless steel construction and an ETFE cable jacket allow for installation in a wide variety of liquids. The heavy-duty steel cage anchors the sensor at the bottom of the tank to ensure accurate level readings as well as acting as a barrier between solids in the tank and the flush diaphragm of the sensor. A vent tube runs the length of the cable and quickly equalizes the barometric pressure within the sensor body. The CS15 is available in various output signals including 4-20mA for long-distance transmissions and voltage outputs for low power, low current consumption applications.

    The CS15 Non-Clogging Submersible Pressure Transducer was carefully engineered to withstand some of the toughest environments. With a thickness of 1 to 1.5 mils, the diaphragm is the thinnest component of the transducer. To help protect this critical component, Hastelloy* C276 (UNS N10276) is the standard diaphragm material. This material is a super nickel-molybdenum-chromium alloy offering excellent corrosion resistance, prolonging the life of the transducer. 300 series stainless steel (316L and 304) makes up the remaining metallic construction including the heavy-duty steel cage, housing (case), and 1/2″ MNPT conduit fitting. Precision TIG welds along with a Kynar strain relief and Viton seals prevent liquids from entering the sensor, resulting in an IP68 rating.

    • Non-Clogging submersible pressure transducer
    • Pressure ranges from 2 PSI to 50 PSI
    • Flush diaphragm prevents clogging
    • Hastelloy C276 diaphragm material
    • IP68 rated
    • Operating temperature of -40 to +85°C
    • Compensated temperatures from 0 to +55°C
    • Accuracy down to ≤±0.25% BFSL / ≤ ± 0.5% BFSL (2 PSI)
    • Stability (1 year) of ≤ ±0.25% of FS
    • Pressure cycles of 50 million
    • Overpressure of 2x minimum
    • Burst pressure of 5x or 500 PSI (whichever is less)
    • Electrical output options of 4-20mA, 1-5V, 0.5-2.5V non-ratiometric or 0.5-4.5V ratiometric

    Typical applications for the CS15 submersible pressure transducer series include:

    • Wastewater lift stations
    • Liquid level measurement
    • Tanks with viscous media
    • Turbulent tanks


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy at 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (2 PSI)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles50 million
    Overpressure2x minimum
    Burst Pressure5x or 250 PSI (whichever is less)
    Operating Temperature-40°C to +85°C
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to +125°C
    TC Zero≤±1% of FS
    ≤±2% of FS (2 PSI)
    TC Span≤±1% of FS
    ≤±2% of FS (2 PSI)
    EMI / RFI ProtectionYes
    IP RatingIP68 minimum
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine
    Weight (excluding cable)~3.5lbs
    Wetted materialSee Dimensions / Material image
    Cable conductors22 AWG
    Cable pull strength150lbs

    * Accuracy includes non-linearity, hysteresis and non-repeatability

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.comfor more information.

    The post Core Sensors CS15 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS54 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/differential-pressure-sensors/core-sensors-cs54-series/ Wed, 10 Aug 2022 07:51:27 +0000 https://components.componentsdevelopment.com/?post_type=product&p=82810
  • Non-Incendive Differential Pressure Transducer
  • Differential pressure up to 50 PSI
  • Line pressure up to 500 PSI
  • Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below)
  • Overpressure of 2X or 500 PSI (whichever is less)
  • Temperature range −40°C to +80°C
  • Media temperature of -40 to +125°C

    • The post Core Sensors CS54 Series appeared first on Rhopoint Components.

    ]]>

    The CS54 non-incendive differential pressure transducer is a high-strength sensor designed for differential pressure measurements of liquids and gases in Class I, Division 2 hazardous locations. A 316L SS oil-filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1/4″ MNPT or FNPT process connections.

    In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS54 is offered with an integral Turck® Minifast® electrical connection.

    When combined with a CSA Division 2 approved Turck® cordset and a Turck® Lokfast Guard, there is no requirement for a conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.

    • Non-Incendive Differential Pressure Transducer
    • Differential pressure up to 50 PSI
    • Line pressure up to 500 PSI **
    • Bi-directional pressure ranges available
    • Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below) *
    • Stability (1 year) of ≤±0.25% of FS
    • Pressure cycles of 4 million
    • Overpressure of 2x or 500 PSI (whichever is less), configured differential pressure ***
    • Burst pressure of 3x configured differential pressure ***
    • Temperature range −40°C to +80°C (-20 to +80°C using DIN 43650-A)
    • Media temperature of -40 to +125°C (-40 to +105°C using DIN 43650-A)
    • Electrical output options of 4-20mA, 1-5V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
    • 316L SS diaphragm / oil filled sensor element
    • 1/4” NPT or FNPT process connections

    * Accuracy includes non-linearity, hysteresis and non-repeatability
    ** Max line pressure is the highest common mode pressure that can be applied to the sensor without damage
    *** Overpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur

    Approvals for the Core CS54 series include:

    • CSA Class I, Division 2, Groups A, B, C, D T4 Approved
    • ABS (American Bureau of Shipping) Approved
    • CE

    Note: Must use an approved barrier to maintain listed certifications. See page 4 of the datasheet for entity parameters.

    Typical applications for the CS54 Non-Incendive Differential Pressure Transducer include:

    • Filtration
    • Cryogenic bulk tank level measurement
    • External fuel tank level measurement
    • Compression systems
    • Test stands


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy at 25°C *≤±0.25% BFSL
    ≤±0.5% BFSL (2 PSI & below)
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles4 million
    Maximum Line Pressure **500 PSI
    Overpressure ***2x or 500 PSI (whichever is less, configured differential pressure)
    Burst Pressure ***3x configured differential pressure
    Operating Temperature-40°C to +80°C
    -20°C to +80°C for DIN 43650-A
    Media Temperature-40°C to +125°C
    -40°C to +105°C for DIN 43650-A
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to +125°C
    TC Zero≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    TC Span≤±1% of FS
    ≤±2% of FS (2 PSI & below)
    EMI / RFI ProtectionYes
    IP Rating **IP65 minimum
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    ImageText
    danger iconCaution must be taken when installing and operating the CS50/CS51/CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions, instructions or have any other enquiries.


    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS54 Series appeared first on Rhopoint Components.

    ]]>         Coto RR122-1A22/1A23 Series https://www.rhopointcomponents.com/product/sensors/magnetic-sensors/tmr-magnetic-sensors/coto-rr122-1a22-1a23-series/ Mon, 23 Nov 2020 21:03:27 +0000 https://components.rhopoint.com/product/coto-rr122-1a22-511/
  • TMR digital push-pull magnetic sensor
  • Operate sensitivity of 9 G (typical)
  • Average supply current of 135nA at 3V (typical)
  • Supply voltage range of 1.7V to 5.5V
  • Omnipolar push-pull response
  • Operating frequency of 10 Hz
  • SOT-23-3 (511) or LGA-4 (512) package

    • The post Coto RR122-1A22/1A23 Series appeared first on Rhopoint Components.

    ]]>
    The RedRock™ RR122-1A22/1A23 sensor series from Coto Technology is a range of digital push-pull magnetic sensors designed using a patented Tunneling Magnetoresistance (TMR) technology with seamless CMOS integration. The RR122-1A22/1A23 series features a typical operate sensitivity of 9 G (0.9mT), with an omnipolar magnetic field response. They offer a wide supply voltage range from 1.7V to 5.5V, ideal for applications ranging from small battery-powered electronics to industrial machinery. The TMR sensors have a typical current drain of 135nA (at 3V and operating at 10Hz), and are available with operating temperature ranges of -40°C to +85°C (RR122-1A22-511 & RR122-1A22-512) or -40°C to +125°C (RR122-1A23-511 & RR122-1A23-512). These sensors are ideal for use in medical, industrial, automotive, and consumer applications. All of the RR122-1A22/1A23 series is available in either SOT-23-3 (511 variant) or LGA-4 packages (512 variant).

    • TMR digital push-pull magnetic sensor
    • Operate sensitivity of 9 G (typical)
    • Average supply current of 135nA at 3V (typical)
    • Supply voltage range of 1.7V to 5.5V
    • Omnipolar push-pull response
    • Operating frequency of 10Hz
    • Temperature range of -40° to +85° (RR122-1A22-511/512)
    • Temperature range of -40°C to +125°C (RR122-1A23-511/512)
    • Hysteresis (BHYST)2 of 4G (typical)
    • SOT-23-3 (511) or LGA-4 (512) package

    Approvals for the Coto Technology RR122-1A22/1A23 Series include:

    • RoHS
    • REACH

    Typical applications for the Coto Technology RR122-1A22/1A23 Series include:

    • Proximity Detection
    • Rotary Sensing
    • Fluid Level Detection
    • Door & Lid Closure Detection
    • Utility Meters
    • Portable Medical Devices
    • Motor Controllers
    • Consumer Electronics
    • Wake-Up Microprocessor


    Coto is a worldwide market leader of small signal-switching products sold into the Automatic Test Equipment, Data Acquisition, Instrumentation, Process Control, Telecommunications, Medical and Security markets. Coto specialises in the manufacture of relay, switch and sensor products. Coto are the pioneers of the RedRock® analog and digital TMR magnetic sensors, offering the lowest power consumption, highest sensitivity, ultra-miniature package size, short lead times and a highly-competitive price. Please visit https://cotorelay.com/ for more information.

    The post Coto RR122-1A22/1A23 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS51 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/industrial-pressure-sensors/core-sensors-cs51-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs51-series/
  • Non-incendive low pressure transducer
  • Pressure ranges from 1 PSI up to 49 PSI
  • Temperature range from −20°C up to +80°C *
  • Accuracy of ≤±0.25% BFSL at 25°C **
  • Stability of ≤±0.25% of FS (1 year)
  • Pressure cycles of 100 million
  • Overpressure of 2x minimum

    • The post Core Sensors CS51 Series appeared first on Rhopoint Components.

    ]]>
    The CS51 non-incendive low pressure transducer from Core Sensors is a high-strength sensor designed for use in hazardous environments with various approvals and certifications. Available with low pressure ranges from 1 PSI up to 49 PSI with an accuracy of ≤±0.25% BFSL **. The CS51 has a selection of electrical output options, as well as a choice of process connections and wetted materials available with an operating temperature range of -40°C to +80°C and a media temperature range of -40 to +125°C. The Robust design and variety of configurable options make the CS51 series a versatile pressure transducer designed to operate in some of the harshest conditions. Utilising an all welded stainless steel one-piece diaphragm with no internal O-rings or welds, the series also offers a minimum ingress protection of IP65. The CS51 is an excellent solution for applications such as natural gas compression, hydrogen compression and storage, and process control instrumentation.

    In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS51 Non-Incendive Pressure Transducer is offered with an integral Turck Mini-Fast electrical connection. When combined with a Turck cordset (with ITC rated cable) and a Turck Lokfast Guard, there is no requirement for conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.

    *Core Sensors recommends confirming hazardous location installation requirements with your local inspector as each installation is unique.

    • Non-incendive low pressure transducer
    • Pressure ranges from 1 PSI up to 49 PSI
    • Accuracy of ≤±0.25% BFSL at 25°C **
    • Stability of ≤±0.25% of FS (1 year)
    • Pressure cycles of 100 million
    • Overpressure of 2x minimum
    • Burst pressure of 5x or 245 PSI (whichever is less)
    • Bi-directional pressure ranges available
    • Various electrical output option (see tables below for more details)
    • Temperature range from −20°C up to +80°C *
    • Reverse polarity protection and EMI protection
    • One piece design with isolated media
    • Wetted materials available in 316L SS and Hastelloy C276 (special order item)
    • IP65 minimum rated ***

    * Temperature values are dependent on the chosen connection.
    ** Accuracy includes non-linearity, hysteresis and non-repeatability
    *** IP Rating applies when the electrical connector is attached with the appropriate ingress protection and is dependent on the electrical termination selected. Contact us for more information.

    Approvals/Certifications for the Core CS51 series include:

    • CSA Class I, division 2, groups A, B, C, D T4
    • ABS (American bureau of shipping)
    • CE

    Typical applications for the CS51 non-incendive low pressure transducer series include:

    • Natural gas compression
    • Oil exploration
    • Process control
    • Vapor recovery


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy at 25°C **≤±0.25% BFSL
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles100 million
    Overpressure2x minimum
    Burst Pressure5x or 245 PSI (whichever is less)
    Operating Temperature-40°C to +80°C
    -20°C to +80°C for DIN 43650-A
    Media Temperature-40°C to +125°C
    -40°C to +105°C for DIN 43650-A
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to +125°C
    TC Zero≤±1% of FS
    ≤ ± 2% of FS (2 PSI & below)
    TC Span≤±1% of FS
    ≤ ± 2% of FS (2 PSI & below)
    EMI / RFI ProtectionYes
    IP Rating **IP65 minimum
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    1 to 6V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    ImageText
    danger iconCaution must be taken when installing and operating the CS50/CS51/CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions, instructions or have any other enquiries.


    Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS51 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS50 Series https://www.rhopointcomponents.com/product/sensors/pressure-sensors/industrial-pressure-sensors/core-sensors-cs50-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs50-series/
  • Non-incendive pressure transducer
  • Pressure ranges from 50 PSI to 30,000 PSI
  • Accuracy of ≤±0.25% BFSL at 25°C
  • Stability of ≤±0.25% of FS
  • Pressure cycles of 100 million
  • Overpressure of 2x minimum
  • Burst pressure of 5x or 60,000 PSI

    • The post Core Sensors CS50 Series appeared first on Rhopoint Components.

    ]]>
    The CS50 non-incendive pressure transducer from Core Sensors is a high-strength sensor designed for use in hazardous environments with various approvals and certifications. Available with pressure ranges from 50 PSI up to 30,000 PSI with an accuracy of ≤±0.25% BFSL. The CS50 has a selection of electrical output options, as well as a choice of process connections and wetted materials available with an operating temperature range of -40°C to +80°C and a media temperature range of -40 to +125°C. The Robust design and variety of configurable options make the CS50 series a versatile pressure transducer designed to operate in some of the harshest conditions. Utilising an all welded stainless steel one-piece diaphragm with no internal O-rings or welds, the series also offers a minimum ingress protection of IP65. The CS50 is an excellent solution for applications such as natural gas compression, hydrogen compression and storage, and process control instrumentation.

    In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS50 non-incendive pressure transducer is offered with an integral Turck Mini-Fast electrical connection. When combined with a Turck cordset (with ITC rated cable) and a Turck Lokfast Guard, there is no requirement for conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.

    *Core Sensors recommends confirming hazardous location installation requirements with your local inspector as each installation is unique.

    • Non-incendive pressure transducer
    • Pressure ranges available from 50 PSI to 30,000 PSI
    • Accuracy of ≤±0.25% BFSL at 25°C
    • Stability of ≤±0.25% of FS (1 year)
    • Pressure cycles of 100 million
    • Overpressure of 2x minimum
    • Burst pressure of 5x or 60,000 PSI (whichever is less)
    • Various electrical output option (see tables below for more details)
    • Operating temperature range −40°C to +80°C
    • Media temperature range of -40 to +125°C
    • Reverse polarity and EMI protection
    • IP65 minimum rated
    • One piece diaphragm design with no internal O-rings or welds
    • Various wetted materials available in 316L SS, 17-4PH, Hastelloy C276 (special order item) and Inconel 718 (special order item)
    • Please contact us for custom designs

    Approvals/Certifications for the Core CS50 series include:

    • CSA Class I, Division 2 Groups A,BC,D T4
    • ANSI/UL 122701 Single Seal
    • ABS (American Bureau of Shipping)
    • CE

    Typical applications for the CS50 non-incendive pressure transducer series include:

    • Hydrogen compression & storage
    • Natural gas compression
    • Oil exploration
    • Process control


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Accuracy at 25°C **≤±0.25% BFSL
    Stability (1 Year)≤±0.25% of FS
    Pressure Cycles100 million
    Overpressure2x minimum
    Burst Pressure5x or 60,000 PSI (whichever is less)
    Operating Temperature-40°C to +80°C
    -20°C to +80°C for DIN 43650-A
    Media Temperature-40°C to +125°C
    -40°C to +105°C for DIN 43650-A
    Compensated Temperature0°C to +55°C
    Storage Temperature-40°C to +125°C
    TC Zero≤±1% of FS
    TC Span≤±1% of FS
    EMI / RFI ProtectionYes
    IP Rating ***IP65 minimum
    Vibration10g, 20 to 2000Hz
    Shock100g, 11msec, 1/2 sine

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    1 to 6V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Ratiometric Voltage)

    AttributeValue
    Outputs0.5 to 4.5V ratiometric
    Excitation5VDC ±0.5V
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Low Power Voltage)

    AttributeValue
    Outputs0.5 to 2.5V non-ratiometric
    Excitation3 to 5VDC unregulated
    Current Consumption≤3mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    ImageText
    danger iconCaution must be taken when installing and operating the CS50/CS51/CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. Any misuse or improper installation may impair the equipment’s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions, instructions or have any other enquiries.


    Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

    The post Core Sensors CS50 Series appeared first on Rhopoint Components.

    ]]>         Core Sensors CS20 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/temperature-transducers-and-probes/core-sensors-cs20-series/ Mon, 23 Nov 2020 21:02:21 +0000 https://components.rhopoint.com/product/core-sensors-cs20-series/
  • Industrial temperature transmitter
  • RTD sensor type, PT100, Class B
  • Media temperature range of -40°C up to +200°C *
  • Operating temperature range of -40°C up to +85°C
  • Total error at RT & FS of ≤±1%
  • Maximum pressure of 5,000 PSI
  • Amplified 4-20mA or 1-5V output signal

    • The post Core Sensors CS20 Series appeared first on Rhopoint Components.

    ]]>
    The CS20 industrial temperature transmitter series from Core Sensors is designed for temperature measurement applications with configurable temperature ranges from −40°C up to +200°C. The CS20 series is constructed using a 316L SS probe and thread, making it compatible with a wide range of process liquids and gases. Amplified outputs of 4mA to 20mA or 1V to 5V eliminate the need for any external amplification. Various probe lengths and electrical connectors including a DIN43650-A or M12x1 Eurofast are available, further simplifying installation.

    • Industrial temperature transmitter
    • RTD sensor type, PT100, Class B
    • Media temperature range of -40°C up to +200°C *
    • Operating temperature range of -40°C up to +85°C
    • Total error at RT ≤±1%
    • Total error at FS ≤±1%
    • Maximum pressure of 5,000 PSI
    • Amplified 4-20mA or 1-5V output signal
    • 316L SS probe and process connection
    • Choice of 1/2″ NPT male or 1/4″ NPT male process connections
    • Reverse polarity and EMI protection
    • IP65 Rated **

    * Media temperature is user selected at the time of ordering. Not all transmitters are scaled to measure –40 to +200°C.
    ** IP Rating applies when the electrical connector is attached with the appropriate ingress protection and is dependent on the electrical termination selected. Contact us for more information.

    Typical applications for the CS20 industrial pressure transducer series include:

    • Gearbox lubrication systems
    • Hydraulic oil fluid temperature
    • Gas Flow temperature
    • Water and chemical storage


    Performance, Thermal, Environmental & Physical Specifications Table

    AttributeValue
    Sensor TypeRTD
    PT100, Class B
    Total Error at RT≤±1%
    Total Error at FS≤±1%
    Maximum Pressure5,000 PSI
    Operating Temperature-40°C to +85°C
    Media Temperature-40°C to +200°C
    Storage Temperature-40°C to +125°C
    EMI/RFI ProtectionYes
    IP Rating **IP65 minimum

    Electrical Specifications (Current)

    AttributeValue
    Outputs4 to 20mA
    Excitation10 to 28VDC
    Current Consumption20mA (typical)
    Output Load0 to 800Ω at 10 to 28VDC
    Frequency Response~250Hz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum

    Electrical Specifications (Voltage)

    AttributeValue
    Outputs1 to 5V
    Excitation10 to 28VDC
    Current Consumption<10mA
    Output Load5kΩ (minimum)
    Frequency Response~1kHz (minimum)
    Zero Offset (of FS)≤±0.5% (typical)
    ±1% maximum
    Span Tolerance (of FS)≤±0.5% (typical)
    ±1% maximum


    Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit for more information.

    The post Core Sensors CS20 Series appeared first on Rhopoint Components.

    ]]>         RdF 26723 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/thermocouples/rdf-26723-series/ Mon, 23 Nov 2020 20:57:51 +0000 https://components.rhopoint.com/product/rdf-26723-series/
  • Stikon® type K thermocouple
  • Insulation resistance of 50MΩ minimum at 50VDC in Ungrounded junction TCs
  • 2 wire configuration
  • Kapton® case material
  • Embeded in a paper thin laminate

    • The post RdF 26723 Series appeared first on Rhopoint Components.

    ]]>     The 26723 Stikon® type K (Chromel/Alumel) thermocouple temperature sensor series from RdF are embedded in a paper thin laminate intended for surface temperature measurement applications. These thermocouples have a response time of 0.25s (grounded) and 0.5s (ungrounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type K thermocouple offers an operating temperature range of -184°C up to +260°C (continuous), +371°C (short term) and provides an accuracy of ±2.2°C or ±2%. The 26723 series from RDF are without pre-applied cement so you can select the adhesive or clamp for extended temperature capability. These thermocouples use a Kapton® case material.

    • Stikon® thermocouple
    • Type K (Chromel/Alumel)
    • Accuracy of ±2.2°C or ±2%
    • Temperature range of -184°C up to +260°C (continuous), +371°C (short term)
    • Operating current of 0.5mA
    • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
    • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
    • Lead wires 30AWG solid T/C wire with fiberglass insulation and overwrap, parallel lay
    • Kapton® case material

    The post RdF 26723 Series appeared first on Rhopoint Components.

    ]]>         RdF 20100 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/thermocouples/rdf-20100-series/ Mon, 23 Nov 2020 20:57:51 +0000 https://components.rhopoint.com/product/rdf-20100-series/
  • Butt bonded foil thermocouple
  • Micro-foil® thickness of 0.0128mm (0.0005")
  • Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
  • 2 wire configuration
  • Removable Kapton® frame for bare foil applications
  • Standard lead length of 6", additional lengths available on request

    • The post RdF 20100 Series appeared first on Rhopoint Components.

    ]]>     The 20100 butt bonded foil type K (Chromel/Alumel) thermocouple temperature sensor series from RdF offer high performance and are ideal for demanding applications. These surface thermocouples provide an accuracy of ±2.2°C or ±2% with a fast response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type K thermocouple offers an operating temperature range of -184°C up to +816°C. The 20100 series from RDF utilises butt bonding which produces thermocouples with no increase in thickness or mass at the junction. This offers a micro-foil® thickness of 0.0128mm (0.0005″). The sensors have a removable Kapton® frame for bare foil application.

    • Butt bonded foil thermocouple
    • Type K (Chromel/Alumel)
    • Accuracy of ±2.2°C or ±2%
    • Temperature range -184°C to +816°C
    • Operating current of 0.5mA
    • Micro-foil® thickness of 0.0128mm (0.0005″)
    • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
    • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
    • Lead wires are dot colour coded ribbon leads
    • Standard lead length 6″, additional lengths available upon request
    • Removable Kapton® case material for bare foil applications

    The post RdF 20100 Series appeared first on Rhopoint Components.

    ]]>         RdF 20101 Series https://www.rhopointcomponents.com/product/sensors/temperature-sensors/thermocouples/rdf-20101-series/ Mon, 23 Nov 2020 20:57:51 +0000 https://components.rhopoint.com/product/rdf-20101-series/
  • Butt bonded foil thermocouple
  • Micro-foil® thickness of 0.0128mm (0.0005")
  • Insulation resistance of 50MΩ at 50VDC in Ungrounded junction TCs
  • 2 wire configuration
  • Removable Kapton® frame for bare foil applications
  • Standard lead length of 6", additional lengths available on request

    • The post RdF 20101 Series appeared first on Rhopoint Components.

    ]]>     The 20101 butt bonded foil type E (Chromel/Constantan) thermocouple temperature sensor series from RdF offer high performance and are ideal for demanding applications. These surface thermocouples provide an accuracy of ±1.7°C or ±0.5% with a fast response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type E thermocouple offers an operating temperature range of -200°C up to +900°C. The 20101 series from RDF utilises butt bonding which produces thermocouples with no increase in thickness or mass at the junction. This offers a micro-foil® thickness of 0.0128mm (0.0005″). The sensors have a removable Kapton® frame for bare foil application.

    • Butt bonded foil thermocouple
    • Type E (Chromel/Constantan)
    • Accuracy of ±1.7°C or ±0.5%
    • Temperature range -200°C up to +900°C
    • Operating current of 0.5mA
    • Micro-foil® thickness of 0.0128mm (0.0005″)
    • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
    • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
    • Lead wires are dot colour coded ribbon leads
    • Standard lead length 6″, additional lengths available upon request
    • Removable Kapton® case material for bare foil applications

    The post RdF 20101 Series appeared first on Rhopoint Components.

    ]]>