• Wirewound radial leaded precision resistor
• Available in any resistance between 10Ω and 200kΩ including custom values
• Small radial leaded through-hole package
• Wire gauge of 22AWG (0.6mm)
• Excellent stability of ±35ppm/yr
• Noise levels so small they are immeasurable
• Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
• TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
• Maximum working voltage of 150V
• Power rating of 0.3W (±0.1%) and ≈0.18W (±0.01%) at +85°C
• Maximum rated operating temperature +85°C
• Temperature range from -55°C up to +160°C

The GG102 Squaristor radial wirewound resistor series offers ultra-precision in a small compact radial leaded through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value between 10Ω and 200kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts (30 pc minimum order quantity for standard parts, where they are not stocked).

The General Resistance ultra-precision wirewound resistor series has been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

The post General Resistance GG102 Squaristor Series appeared first on Rhopoint Components.

• Wirewound axial leaded precision resistor
• Available in any resistance between 10Ω and 200kΩ
• Stocked in many standard resistance values here at Rhopoint Components
• Small axial leaded through-hole package
• Excellent stability of ±50ppm/yr
• Noise levels so small they are immeasurable
• Wire gauge of 24AWG (0.4mm)
• Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
• TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
• Maximum working voltage of 175V
• Power rating of 0.2W (±0.1%) and 0.125W (±0.01%) at +85°C
• Maximum rated operating temperature +85°C
• Temperature range from -55°C up to +160°C

The 5E10 Mini-Ohm axial wirewound precision resistor series offers ultra-precision in a small compact through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value between 10Ω and 200kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts (30 pc minimum order quantity for standard parts, where they are not stocked).

The General Resistance ultra-precision wirewound axial leaded resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

The post General Resistance 5E10 Mini-Ohm Series appeared first on Rhopoint Components.

• Wirewound axial leaded precision resistor
• Available in any resistance between 1Ω and 699kΩ including custom values
• Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
• Wire gauge of 20AWG (0.6mm)
• Excellent stability of ±35ppm/yr
• Noise levels so small they are immeasurable
• Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
• TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
• Maximum working voltage of 200V
• Power rating of 0.33W (±0.1%) and ≈0.2W (±0.01%) at +85°C
• Maximum rated operating temperature +85°C
• Temperature range from -55°C up to +160°C

The 8E16 Econistor axial wirewound precision resistor series is the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

Any custom resistance value between 1Ω and 699kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts, including additional RTD simulation values that are not standard stocked items (30 pc minimum order quantity for standard parts, where they are not stocked).

The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

The post General Resistance 8E16 Econistor Series appeared first on Rhopoint Components.

• Wirewound axial leaded precision resistor
• Available in any resistance between 1Ω and 699kΩ including custom values
• Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
• Wire gauge of 20AWG (0.6mm)
• Excellent stability of ±35ppm/yr
• Noise levels so small they are immeasurable
• Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
• TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
• Maximum working voltage of 200V
• Power rating of 0.33W (±0.1%) and ≈0.2W (±0.01%) at +85°C
• Maximum rated operating temperature +85°C
• Temperature range from -55°C up to +160°C

The 8G16 Econistor axial wirewound precision resistor series is the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

Any custom resistance value between 1Ω and 699kΩ can be produced, with a low minimum order requirement of 10 pcs for non-standard parts, including additional RTD simulation values that are not standard stocked items (30 pc minimum order quantity for standard parts, where they are not stocked).

The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time. Please visit www.primetechnology.com for more information on the General Resistance product line.

The post General Resistance 8G16 Econistor Series appeared first on Rhopoint Components.

• Surface-mount high precision audio thin film chip resistor
• Resistance range between 47Ω and 100kΩ available
• Resistance value series E-6
• Power rating options of 0.1W or 0.125W
• Tolerance values available ±0.1% (B) and ±0.5% (D)
• TCR values available ±25 ppm/°C (P)
• Maximum voltage of 150V
• Temperature range of −55°C to +155°C
• Selection of resistors offered to find best sounding resistor
• AEC-Q200 compliant
• Chip size of 0805

Susumu RS2012 series high precision audio thin film chip resistors are ideal for the following applications:

• High quality audio equipment
• Automotive audio equipment
• Mobile audio equipment and smartphones

The below table gives the full specifications of the Susumu RS series including the RS2012:

Please see the Susumu selection guide in the Technical Library tab for the E-6 

The post Susumu RS2012 Series appeared first on Rhopoint Components.

• Surface-mount high precision audio thin film chip resistor
• Resistance range between 47Ω and 100kΩ available
• Resistance value series E-6
• Power rating options of 0.03125W or 0.0625W
• Tolerance values available ±0.1% (B) and ±0.5% (D)
• TCR values available ±25 ppm/°C (P)
• Maximum voltage of 75V
• Temperature range of −55°C to +155°C
• Selection of resistors offered to find best sounding resistor
• AEC-Q200 compliant
• Chip size of 0402

Susumu RS1005 series high precision audio thin film chip resistors are ideal for the following applications:

• High quality audio equipment
• Automotive audio equipment
• Mobile audio equipment and smartphones

The below table gives the full specifications of the Susumu RS series including the RS1005:

Please see the Susumu selection guide in the Technical Library tab for the E-6 values

 

The post Susumu RS1005 Series appeared first on Rhopoint Components.

The KRL6432T4 Current sensing chip resistor is part of the KRL series of 4-sided terminal metal foil low resistance chip resistors from Susumu. The KRL6432T4 model has a 2512 chip size and is available in E-6 resistance values between 0.001Ω up to 0.5Ω. This 4 terminal resistor has been designed with separated voltage terminals allowing for precise measurement of voltage. Susumu’s metal foil technology offers a power rating of 2W as well as a very stable TCR, down to ±50 ppm/°C at low resistances. These resistors have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, whereas the M type utilises low EMF materials that are stable up to +155°C.

• Current sensing surface-mount chip resistor
• Long sided terminal design with a 2512 chip size
• Resistance values from 0.001Ω up to 0.5Ω
• Resistance value series of E-6
• Tolerances of ±1, ±2% or ±5%
• TCR of ±50 ppm/°C or ±100 ppm/°C
• Power rating of 2W
• Separated voltage terminal for precise measurement of voltage
• Temperature range of low EMF -55°C to +155°C (M)
• Certified AEC-Q200 compliant

The Susumu KRL6432T4 Current sensing chip resistor is ideal for the following applications:

• Automotive electronics
• Power source devices
• Smartphones, mobile phones
• PCs, HDD
• Audio visual equipment
• Industrial measurement instrumentation/equipment
• Office automation equipment

Susumu is a leading manufacturer of thin-film and metal foil SMD resistors, covering a wide range of resistance values and applications. Specialised in the production of Low ohmic, current sensing resistors with long sided variants available for higher power applications. Please visit www.susumu.co.jp/usa/ for more information.

The post Susumu KRL6432T4 Series appeared first on Rhopoint Components.

The KRL7638T4 Current sensing chip resistor is part of the KRL series of 4-sided terminal metal foil low resistance chip resistors from Susumu. The KRL7638T4 model has a 3015 chip size and is available in E-6 resistance values between 0.001Ω up to 0.5Ω. This 4 terminal resistor has been designed with separated voltage terminals allowing for precise measurement of voltage. Susumu’s metal foil technology offers a power rating of 3W as well as a very stable TCR, down to ±50 ppm/°C at low resistances. These resistors have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, whereas the M type utilises low EMF materials that are stable up to +155°C.

• Current sensing surface-mount chip resistor
• Long sided terminal design with a 3015 chip size
• Resistance values from 0.001Ω up to 0.5Ω
• Resistance value series of E-6
• Tolerances of ±1%, ±2% or ±5%
• TCR of ±50 ppm/°C or ±100 ppm/°C
• Power rating of 3W
• Separated voltage terminal for precise measurement of voltage
• Temperature range of low EMF -55°C to +155°C (M)
• Certified AEC-Q200 compliant

The Susumu KRL7638T4 Current sensing chip resistor is ideal for the following applications:

• Automotive electronics
• Power source devices
• Smartphones, mobile phones
• PCs, HDD
• Audio visual equipment
• Industrial measurement instrumentation/equipment
• Office automation equipment

Susumu is a leading manufacturer of thin-film and metal foil SMD resistors, covering a wide range of resistance values and applications. Specialised in the production of Low ohmic, current sensing resistors with long sided variants available for higher power applications. Please visit www.susumu.co.jp/usa/ for more information.

The post Susumu KRL7638T4 Series appeared first on Rhopoint Components.

The KRL9045T4 Current sensing chip resistor is part of the KRL series of 4-sided terminal metal foil low resistance chip resistors from Susumu. The KRL9045T4 model has a 3518 chip size and is available in E-6 resistance values between 0.001Ω up to 0.5Ω. This 4 terminal resistor has been designed with separated voltage terminals allowing for precise measurement of voltage. Susumu’s metal foil technology offers a power rating of 4W as well as a very stable TCR, down to ±50 ppm/°C at low resistances. These resistors have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, whereas the M type utilises low EMF materials that are stable up to +155°C.

• Current sensing surface-mount chip resistor
• Long sided terminal design with a 3518 chip size
• Resistance values from 0.001Ω up to 0.5Ω
• Resistance value series of E-6
• Tolerances of ±1%, ±2% or ±5%
• TCR of ±50 ppm/°C or ±100 ppm/°C
• Power rating of 4W
• Separated voltage terminal for precise measurement of voltage
• Temperature range of low EMF -55°C to +155°C (M)
• Certified AEC-Q200 compliant

The Susumu KRL9045T4 Current sensing chip resistor is ideal for the following applications:

• Automotive electronics
• Power source devices
• Smartphones, mobile phones
• PCs, HDD
• Audio visual equipment
• Industrial measurement instrumentation/equipment
• Office automation equipment

Susumu is a leading manufacturer of thin-film and metal foil SMD resistors, covering a wide range of resistance values and applications. Specialised in the production of Low ohmic, current sensing resistors with long sided variants available for higher power applications. Please visit www.susumu.co.jp/usa/ for more information.

The post Susumu KRL9045T4 Series appeared first on Rhopoint Components.

The KRL11050T4 Current sensing chip resistor is part of the KRL series of 4-sided terminal metal foil low resistance chip resistors from Susumu. The KRL11050T4 model has a 4320 chip size and is available in E-6 resistance values between 0.001Ω to 0.5Ω. This 4 terminal resistor has been designed with separated voltage terminals allowing for precise measurement of voltage. Susumu’s metal foil technology offers a power rating of 5W as well as a very stable TCR, down to ±50 ppm/°C at low resistances. These resistors have been developed to withstand high operating temperatures and applications that require the use of low EMF components. The C type utilises materials that can be operated up to +175°C, whereas the M type utilises low EMF materials that are stable up to +155°C.

• Current sensing surface-mount chip resistor
• Long sided terminal design with a 4320 chip size
• Resistance values from 0.001Ω to 0.5Ω
• Resistance value series of E-6
• Tolerances of ±1%, ±2% or ±5%
• TCR of ±50 ppm/°C or ±100 ppm/°C
• Power rating of 5W
• Separated voltage terminal for precise measurement of voltage
• Temperature range of low EMF -55°C to +155°C (M)
• Certified AEC-Q200 compliant

The Susumu KRL11050T4 Current sensing chip resistor is ideal for the following applications:

• Automotive electronics
• Power source devices
• Smartphones, mobile phones
• PCs, HDD
• Audio visual equipment
• Industrial measurement instrumentation/equipment
• Office automation equipment

Susumu is a leading manufacturer of thin-film and metal foil SMD resistors, covering a wide range of resistance values and applications. Specialised in the production of Low ohmic, current sensing resistors with long sided variants available for higher power applications. Please visit www.susumu.co.jp/usa/ for more information.

The post Susumu KRL11050T4 Series appeared first on Rhopoint Components.